提交 bb9a4fd1 编写于 作者: A Ayaz Abdulla 提交者: David S. Miller

forcedeth: multicast fix

This patch fixes the case where no multicast addresses are requested to
be added to the multicast filter. The multicast mask must be set to all
1's instead of all 0's.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 32fa8b27
......@@ -277,7 +277,9 @@ enum {
#define NVREG_MCASTADDRA_FORCE 0x01
NvRegMulticastAddrB = 0xB4,
NvRegMulticastMaskA = 0xB8,
#define NVREG_MCASTMASKA_NONE 0xffffffff
NvRegMulticastMaskB = 0xBC,
#define NVREG_MCASTMASKB_NONE 0xffff
NvRegPhyInterface = 0xC0,
#define PHY_RGMII 0x10000000
......@@ -2693,6 +2695,9 @@ static void nv_set_multicast(struct net_device *dev)
addr[1] = alwaysOn[1];
mask[0] = alwaysOn[0] | alwaysOff[0];
mask[1] = alwaysOn[1] | alwaysOff[1];
} else {
mask[0] = NVREG_MCASTMASKA_NONE;
mask[1] = NVREG_MCASTMASKB_NONE;
}
}
addr[0] |= NVREG_MCASTADDRA_FORCE;
......@@ -4803,8 +4808,8 @@ static int nv_open(struct net_device *dev)
nv_mac_reset(dev);
writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
writel(0, base + NvRegMulticastAddrB);
writel(0, base + NvRegMulticastMaskA);
writel(0, base + NvRegMulticastMaskB);
writel(NVREG_MCASTMASKA_NONE, base + NvRegMulticastMaskA);
writel(NVREG_MCASTMASKB_NONE, base + NvRegMulticastMaskB);
writel(0, base + NvRegPacketFilterFlags);
writel(0, base + NvRegTransmitterControl);
......@@ -4898,8 +4903,8 @@ static int nv_open(struct net_device *dev)
spin_lock_irq(&np->lock);
writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
writel(0, base + NvRegMulticastAddrB);
writel(0, base + NvRegMulticastMaskA);
writel(0, base + NvRegMulticastMaskB);
writel(NVREG_MCASTMASKA_NONE, base + NvRegMulticastMaskA);
writel(NVREG_MCASTMASKB_NONE, base + NvRegMulticastMaskB);
writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
/* One manual link speed update: Interrupts are enabled, future link
* speed changes cause interrupts and are handled by nv_link_irq().
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册