ASoC: rt5645: Add JD function support

rt5645 codec support jack detection function. The patch will set
related registers if JD function is used.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

include/sound/rt5645.h

@@ -23,6 +23,9 @@ struct rt5645_platform_data {
 
 	unsigned int hp_det_gpio;
 	bool gpio_hp_det_active_high;
+
+	/* true if codec's jd function is used */
+	bool en_jd_func;
 };
 
 #endif

sound/soc/codecs/rt5645.c

@@ -2203,6 +2203,13 @@ static int rt5645_probe(struct snd_soc_codec *codec)
 
 	snd_soc_update_bits(codec, RT5645_CHARGE_PUMP, 0x0300, 0x0200);
 
+	/* for JD function */
+	if (rt5645->pdata.en_jd_func) {
+		snd_soc_dapm_force_enable_pin(&codec->dapm, "JD Power");
+		snd_soc_dapm_force_enable_pin(&codec->dapm, "LDO2");
+		snd_soc_dapm_sync(&codec->dapm);
+	}
+
 	return 0;
 }
 
@@ -2436,6 +2443,19 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 
 	}
 
+	if (rt5645->pdata.en_jd_func) {
+		regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3,
+			RT5645_IRQ_CLK_GATE_CTRL | RT5645_MICINDET_MANU,
+			RT5645_IRQ_CLK_GATE_CTRL | RT5645_MICINDET_MANU);
+		regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1,
+			RT5645_CBJ_BST1_EN, RT5645_CBJ_BST1_EN);
+		regmap_update_bits(rt5645->regmap, RT5645_JD_CTRL3,
+			RT5645_JD_CBJ_EN | RT5645_JD_CBJ_POL,
+			RT5645_JD_CBJ_EN | RT5645_JD_CBJ_POL);
+		regmap_update_bits(rt5645->regmap, RT5645_MICBIAS,
+			RT5645_IRQ_CLK_INT, RT5645_IRQ_CLK_INT);
+	}
+
 	if (rt5645->i2c->irq) {
 		ret = request_threaded_irq(rt5645->i2c->irq, NULL, rt5645_irq,
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING

sound/soc/codecs/rt5645.h

@@ -1348,6 +1348,8 @@
 #define RT5645_PWR_CLK25M_SFT			4
 #define RT5645_PWR_CLK25M_PD			(0x0 << 4)
 #define RT5645_PWR_CLK25M_PU			(0x1 << 4)
+#define RT5645_IRQ_CLK_MCLK			(0x0 << 3)
+#define RT5645_IRQ_CLK_INT			(0x1 << 3)
 
 /* VAD Control 4 (0x9d) */
 #define RT5645_VAD_SEL_MASK			(0x3 << 8)
@@ -2116,6 +2118,9 @@ enum {
 #define RT5645_RXDP2_SEL_ADC			(0x1 << 3)
 #define RT5645_RXDP2_SEL_SFT			(3)
 
+/* General Control3 (0xfc) */
+#define RT5645_IRQ_CLK_GATE_CTRL		(0x1 << 11)
+#define RT5645_MICINDET_MANU			(0x1 << 7)
 
 /* Vendor ID (0xfd) */
 #define RT5645_VER_C				0x2