Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 bb3613aa 编写于 作者: T Tony Lindgren
浏览文件
操作

Merge branch 'pm-next' of... 

Merge branch 'pm-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
上级 6971071c bb1c9034
展开全部 隐藏空白更改
内联 并排
Showing with 2676 addition and 1997 deletion
Documentation/kernel-parameters.txt
浏览文件 @ bb3613aa
......@@ -2175,11 +2175,6 @@ and is between 256 and 4096 characters. It is defined in the file
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
resource_alloc_from_bottom
Allocate new resources from the beginning of available
space, not the end. If you need to use this, please
report a bug.
resume= [SWSUSP]
Specify the partition device for software suspend
......
Documentation/power/runtime_pm.txt
浏览文件 @ bb3613aa
......@@ -379,8 +379,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
zero)
bool pm_runtime_suspended(struct device *dev);
- return true if the device's runtime PM status is 'suspended', or false
otherwise
- return true if the device's runtime PM status is 'suspended' and its
'power.disable_depth' field is equal to zero, or false otherwise
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
......
Makefile
浏览文件 @ bb3613aa
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
EXTRAVERSION = -rc6
EXTRAVERSION = -rc7
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
......
arch/arm/mach-at91/Makefile
浏览文件 @ bb3613aa
......@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
......
arch/arm/mach-at91/board-pcontrol-g20.c
浏览文件 @ bb3613aa
......@@ -31,6 +31,7 @@
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
#include <mach/stamp9g20.h>
#include "sam9_smc.h"
#include "generic.h"
......@@ -38,11 +39,7 @@
static void __init pcontrol_g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
/* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
at91_register_uart(0, 0, 0);
stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
......@@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void)
/* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
......@@ -66,38 +60,6 @@ static void __init init_irq(void)
}
/*
* NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
*/
static struct atmel_nand_data __initdata nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
};
/*
* Bus timings; unit = 7.57ns
*/
static struct sam9_smc_config __initdata nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 2,
.ncs_write_setup = 0,
.nwe_setup = 2,
.ncs_read_pulse = 4,
.nrd_pulse = 4,
.ncs_write_pulse = 4,
.nwe_pulse = 4,
.read_cycle = 7,
.write_cycle = 7,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
.tdf_cycles = 3,
};
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
......@@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.tdf_cycles = 1,
} };
static void __init add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &nand_smc_config);
at91_add_device_nand(&nand_data);
}
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
......@@ -155,23 +109,6 @@ static void __init add_device_pcontrol(void)
}
/*
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata mmc_data = {
.slot[0] = {
.bus_width = 4,
},
};
#else
static struct at91_mmc_data __initdata mmc_data = {
.wire4 = 1,
};
#endif
/*
* USB Host port
*/
......@@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
};
/*
* Dallas 1-Wire DS2431
*/
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
};
static struct platform_device w1_device = {
.name = "w1-gpio",
.id = -1,
.dev.platform_data = &w1_gpio_pdata,
};
static void add_wire1(void)
{
at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
at91_set_multi_drive(w1_gpio_pdata.pin, 1);
platform_device_register(&w1_device);
}
static void __init pcontrol_g20_board_init(void)
{
at91_add_device_serial();
add_device_nand();
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &mmc_data);
#else
at91_add_device_mmc(0, &mmc_data);
#endif
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
at91_add_device_i2c(pcontrol_g20_i2c_devices,
ARRAY_SIZE(pcontrol_g20_i2c_devices));
add_wire1();
add_device_pcontrol();
at91_add_device_spi(pcontrol_g20_spi_devices,
ARRAY_SIZE(pcontrol_g20_spi_devices));
......
arch/arm/mach-at91/board-stamp9g20.c
浏览文件 @ bb3613aa
......@@ -32,7 +32,7 @@
#include "generic.h"
static void __init portuxg20_map_io(void)
void __init stamp9g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
......@@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init stamp9g20evb_map_io(void)
{
stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
| ATMEL_UART_DCD | ATMEL_UART_RI);
}
static void __init portuxg20_map_io(void)
{
stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
......@@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)
/* USART5 on ttyS6. (Rx, Tx only) */
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init stamp9g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
| ATMEL_UART_DCD | ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init init_irq(void)
......@@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
.pullup_pin = 0, /* pull-up driven by UDC */
};
static struct at91_udc_data __initdata stamp9g20_udc_data = {
static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
};
......@@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
}
};
static struct gpio_led stamp9g20_leds[] = {
static struct gpio_led stamp9g20evb_leds[] = {
{
.name = "D8",
.gpio = AT91_PIN_PB18,
......@@ -250,7 +248,7 @@ void add_w1(void)
}
static void __init generic_board_init(void)
void __init stamp9g20_board_init(void)
{
/* Serial */
at91_add_device_serial();
......@@ -262,34 +260,40 @@ static void __init generic_board_init(void)
#else
at91_add_device_mmc(0, &mmc_data);
#endif
/* USB Host */
at91_add_device_usbh(&usbh_data);
/* Ethernet */
at91_add_device_eth(&macb_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* W1 */
add_w1();
}
static void __init portuxg20_board_init(void)
{
generic_board_init();
/* SPI */
at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
/* USB Device */
at91_add_device_udc(&portuxg20_udc_data);
/* Ethernet */
at91_add_device_eth(&macb_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
/* LEDs */
at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
}
static void __init stamp9g20_board_init(void)
static void __init stamp9g20evb_board_init(void)
{
generic_board_init();
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
/* USB Device */
at91_add_device_udc(&stamp9g20_udc_data);
at91_add_device_udc(&stamp9g20evb_udc_data);
/* Ethernet */
at91_add_device_eth(&macb_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* LEDs */
at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
}
MACHINE_START(PORTUXG20, "taskit PortuxG20")
......@@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = stamp9g20_map_io,
.map_io = stamp9g20evb_map_io,
.init_irq = init_irq,
.init_machine = stamp9g20_board_init,
.init_machine = stamp9g20evb_board_init,
MACHINE_END
arch/arm/mach-at91/clock.c
浏览文件 @ bb3613aa
......@@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
uhpck.rate_hz = utmi_clk.parent->rate_hz;
uhpck.rate_hz = utmi_clk.rate_hz;
uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
......
arch/arm/mach-at91/include/mach/stamp9g20.h 0 → 100644
浏览文件 @ bb3613aa
#ifndef __MACH_STAMP9G20_H
#define __MACH_STAMP9G20_H
void stamp9g20_map_io(void);
void stamp9g20_board_init(void);
#endif
arch/arm/mach-omap2/control.c
浏览文件 @ bb3613aa
......@@ -239,9 +239,19 @@ void omap3_save_scratchpad_contents(void)
struct omap3_scratchpad_prcm_block prcm_block_contents;
struct omap3_scratchpad_sdrc_block sdrc_block_contents;
/* Populate the Scratchpad contents */
/*
* Populate the Scratchpad contents
*
* The "get_*restore_pointer" functions are used to provide a
* physical restore address where the ROM code jumps while waking
* up from MPU OFF/OSWR state.
* The restore pointer is stored into the scratchpad.
*/
scratchpad_contents.boot_config_ptr = 0x0;
if (omap_rev() != OMAP3430_REV_ES3_0 &&
if (cpu_is_omap3630())
scratchpad_contents.public_restore_ptr =
virt_to_phys(get_omap3630_restore_pointer());
else if (omap_rev() != OMAP3430_REV_ES3_0 &&
omap_rev() != OMAP3430_REV_ES3_1)
scratchpad_contents.public_restore_ptr =
virt_to_phys(get_restore_pointer());
......@@ -474,4 +484,12 @@ void omap3_control_restore_context(void)
omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
return;
}
void omap3630_ctrl_disable_rta(void)
{
if (!cpu_is_omap3630())
return;
omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
arch/arm/mach-omap2/control.h
浏览文件 @ bb3613aa
......@@ -204,6 +204,10 @@
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
/* 36xx-only RTA - Retention till Accesss control registers and bits */
#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
#define OMAP36XX_RTA_DISABLE 0x0
/* 34xx D2D idle-related pins, handled by PM core */
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
......@@ -270,6 +274,8 @@
#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860)
#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
#define OMAP343X_SCRATCHPAD_REGADDR(reg) OMAP2_L4_IO_ADDRESS(\
OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
......@@ -347,10 +353,11 @@ extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
extern u32 *get_restore_pointer(void);
extern u32 *get_es3_restore_pointer(void);
extern u32 *get_omap3630_restore_pointer(void);
extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
extern void omap3630_ctrl_disable_rta(void);
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
......
arch/arm/mach-omap2/cpuidle34xx.c
浏览文件 @ bb3613aa
......@@ -293,25 +293,26 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
/**
* omap3_cpuidle_update_states - Update the cpuidle states.
* omap3_cpuidle_update_states() - Update the cpuidle states
* @mpu_deepest_state: Enable states upto and including this for mpu domain
* @core_deepest_state: Enable states upto and including this for core domain
*
* Currently, this function toggles the validity of idle states based upon
* the flag 'enable_off_mode'. When the flag is set all states are valid.
* Else, states leading to OFF state set to be invalid.
* This goes through the list of states available and enables and disables the
* validity of C states based on deepest state that can be achieved for the
* variable domain
*/
void omap3_cpuidle_update_states(void)
void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state)
{
int i;
for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
struct omap3_processor_cx *cx = &omap3_power_states[i];
if (enable_off_mode) {
if ((cx->mpu_state >= mpu_deepest_state) &&
(cx->core_state >= core_deepest_state)) {
cx->valid = 1;
} else {
if ((cx->mpu_state == PWRDM_POWER_OFF) ||
(cx->core_state == PWRDM_POWER_OFF))
cx->valid = 0;
cx->valid = 0;
}
}
}
......@@ -452,6 +453,18 @@ void omap_init_power_states(void)
omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/*
* Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
* enable OFF mode in a stable form for previous revisions.
* we disable C7 state as a result.
*/
if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
omap3_power_states[OMAP3_STATE_C7].valid = 0;
cpuidle_params_table[OMAP3_STATE_C7].valid = 0;
WARN_ONCE(1, "%s: core off state C7 disabled due to i583\n",
__func__);
}
}
struct cpuidle_driver omap3_idle_driver = {
......@@ -504,7 +517,10 @@ int __init omap3_idle_init(void)
return -EINVAL;
dev->state_count = count;
omap3_cpuidle_update_states();
if (enable_off_mode)
omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF);
else
omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET);
if (cpuidle_register_device(dev)) {
printk(KERN_ERR "%s: CPUidle register device failed\n",
......
arch/arm/mach-omap2/pm.c
浏览文件 @ bb3613aa
......@@ -143,5 +143,5 @@ static int __init omap2_common_pm_init(void)
return 0;
}
device_initcall(omap2_common_pm_init);
postcore_initcall(omap2_common_pm_init);
arch/arm/mach-omap2/pm.h
浏览文件 @ bb3613aa
......@@ -58,7 +58,7 @@ extern u32 sleep_while_idle;
#endif
#if defined(CONFIG_CPU_IDLE)
extern void omap3_cpuidle_update_states(void);
extern void omap3_cpuidle_update_states(u32, u32);
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
......@@ -80,9 +80,20 @@ extern void save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
extern unsigned int omap34xx_suspend_sz;
extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
extern void enable_omap3630_toggle_l2_on_restore(void);
#else
#define IS_PM34XX_ERRATUM(id) 0
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
#endif
arch/arm/mach-omap2/pm24xx.c
浏览文件 @ bb3613aa
......@@ -301,14 +301,8 @@ static void omap2_pm_idle(void)
static int omap2_pm_begin(suspend_state_t state)
{
suspend_state = state;
return 0;
}
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
disable_hlt();
suspend_state = state;
return 0;
}
......@@ -349,21 +343,15 @@ static int omap2_pm_enter(suspend_state_t state)
return ret;
}
static void omap2_pm_finish(void)
{
enable_hlt();
}
static void omap2_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
enable_hlt();
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
.end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
......
arch/arm/mach-omap2/pm34xx.c
浏览文件 @ bb3613aa
......@@ -68,6 +68,9 @@ static inline bool is_suspending(void)
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
......@@ -143,7 +146,7 @@ static void omap3_core_save_context(void)
/*
* Force write last pad into memory, as this can fail in some
* cases according to erratas 1.157, 1.185
* cases according to errata 1.157, 1.185
*/
omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
......@@ -430,7 +433,7 @@ void omap_sram_idle(void)
/*
* On EMU/HS devices ROM code restores a SRDC value
* from scratchpad which has automatic self refresh on timeout
* of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
* of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
* Hence store/restore the SDRC_POWER register here.
*/
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
......@@ -529,12 +532,6 @@ static void omap3_pm_idle(void)
}
#ifdef CONFIG_SUSPEND
static int omap3_pm_prepare(void)
{
disable_hlt();
return 0;
}
static int omap3_pm_suspend(void)
{
struct power_state *pwrst;
......@@ -597,14 +594,10 @@ static int omap3_pm_enter(suspend_state_t unused)
return ret;
}
static void omap3_pm_finish(void)
{
enable_hlt();
}
/* Hooks to enable / disable UART interrupts during suspend */
static int omap3_pm_begin(suspend_state_t state)
{
disable_hlt();
suspend_state = state;
omap_uart_enable_irqs(0);
return 0;
......@@ -614,15 +607,14 @@ static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
omap_uart_enable_irqs(1);
enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
.prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
.finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
......@@ -925,12 +917,29 @@ void omap3_pm_off_mode_enable(int enable)
state = PWRDM_POWER_RET;
#ifdef CONFIG_CPU_IDLE
omap3_cpuidle_update_states();
/*
* Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
* enable OFF mode in a stable form for previous revisions, restrict
* instead to RET
*/
if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
omap3_cpuidle_update_states(state, PWRDM_POWER_RET);
else
omap3_cpuidle_update_states(state, state);
#endif
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->next_state = state;
omap_set_pwrdm_state(pwrst->pwrdm, state);
if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
pwrst->pwrdm == core_pwrdm &&
state == PWRDM_POWER_OFF) {
pwrst->next_state = PWRDM_POWER_RET;
WARN_ONCE(1,
"%s: Core OFF disabled due to errata i583\n",
__func__);
} else {
pwrst->next_state = state;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
}
......@@ -1002,6 +1011,17 @@ void omap_push_sram_idle(void)
save_secure_ram_context_sz);
}
static void __init pm_errata_configure(void)
{
if (cpu_is_omap3630()) {
pm34xx_errata |= PM_RTA_ERRATUM_i608;
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
}
}
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
......@@ -1011,6 +1031,8 @@ static int __init omap3_pm_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
pm_errata_configure();
printk(KERN_ERR "Power Management for TI OMAP3.\n");
/* XXX prcm_setup_regs needs to be before enabling hw
......@@ -1058,6 +1080,14 @@ static int __init omap3_pm_init(void)
pm_idle = omap3_pm_idle;
omap3_idle_init();
/*
* RTA is disabled during initialization as per erratum i608
* it is safer to disable RTA by the bootloader, but we would like
* to be doubly sure here and prevent any mishaps.
*/
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
......
arch/arm/mach-omap2/pm44xx.c
浏览文件 @ bb3613aa
......@@ -31,12 +31,6 @@ struct power_state {
static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
static int omap4_pm_prepare(void)
{
disable_hlt();
return 0;
}
static int omap4_pm_suspend(void)
{
do_wfi();
......@@ -59,28 +53,22 @@ static int omap4_pm_enter(suspend_state_t suspend_state)
return ret;
}
static void omap4_pm_finish(void)
{
enable_hlt();
return;
}
static int omap4_pm_begin(suspend_state_t state)
{
disable_hlt();
return 0;
}
static void omap4_pm_end(void)
{
enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap4_pm_begin,
.end = omap4_pm_end,
.prepare = omap4_pm_prepare,
.enter = omap4_pm_enter,
.finish = omap4_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
......
arch/arm/mach-omap2/sdrc.h
浏览文件 @ bb3613aa
......@@ -74,5 +74,4 @@ static inline u32 sms_read_reg(u16 reg)
*/
#define SDRC_MPURATE_LOOPS 96
#endif
arch/arm/mach-omap2/sleep34xx.S
浏览文件 @ bb3613aa
此差异已折叠。
arch/arm/mach-s3c2412/Kconfig
浏览文件 @ bb3613aa
......@@ -28,9 +28,16 @@ config S3C2412_DMA
config S3C2412_PM
bool
select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2412 power management
config S3C2412_PM_SLEEP
bool
help
Internal config node to apply sleep for S3C2412 power management.
Can be selected by another SoCs with similar sleep procedure.
# Note, the S3C2412 IOtiming support is in plat-s3c24xx
config S3C2412_CPUFREQ
......
arch/arm/mach-s3c2412/Makefile
浏览文件 @ bb3613aa
......@@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2412_PM) += pm.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
......
arch/arm/mach-s3c2416/Kconfig
浏览文件 @ bb3613aa
......@@ -27,6 +27,7 @@ config S3C2416_DMA
config S3C2416_PM
bool
select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2416 power management
......
arch/arm/mach-s5pv210/mach-aquila.c
浏览文件 @ bb3613aa
......@@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = {
static struct max8998_platform_data aquila_max8998_pdata = {
.num_regulators = ARRAY_SIZE(aquila_regulators),
.regulators = aquila_regulators,
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
.buck1_max_voltage1 = 1200000,
.buck1_max_voltage2 = 1200000,
.buck2_max_voltage = 1200000,
};
#endif
......
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ bb3613aa
......@@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = {
static struct max8998_platform_data goni_max8998_pdata = {
.num_regulators = ARRAY_SIZE(goni_regulators),
.regulators = goni_regulators,
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
.buck1_max_voltage1 = 1200000,
.buck1_max_voltage2 = 1200000,
.buck2_max_voltage = 1200000,
};
#endif
......
arch/arm/mach-shmobile/include/mach/entry-macro.S
浏览文件 @ bb3613aa
/*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2008 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify
......@@ -14,24 +15,45 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <mach/hardware.h>
#include <mach/irqs.h>
#define INTCA_BASE 0xe6980000
#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */
#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */
#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */
#define INTLVLB_OFFS 0x00000034 /* previous priority level */
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =INTFLGA
ldr \base, =INTCA_BASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base]
/* The single INTFLGA read access below results in the following:
*
* 1. INTLVLB is updated with old priority value from INTLVLA
* 2. Highest priority interrupt is accepted
* 3. INTLVLA is updated to contain priority of accepted interrupt
* 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
*/
ldr \irqnr, [\base, #INTFLGA_OFFS]
/* Restore INTLVLA with the value saved in INTLVLB.
* This is required to support interrupt priorities properly.
*/
ldrb \tmp, [\base, #INTLVLB_OFFS]
strb \tmp, [\base, #INTLVLA_OFFS]
/* Handle invalid vector number case */
cmp \irqnr, #0
beq 1000f
/* intevt to irq number */
/* Convert vector to irq number, same as the evt2irq() macro */
lsr \irqnr, \irqnr, #0x5
subs \irqnr, \irqnr, #16
......
arch/arm/mach-shmobile/include/mach/vmalloc.h
浏览文件 @ bb3613aa
......@@ -2,6 +2,6 @@
#define __ASM_MACH_VMALLOC_H
/* Vmalloc at ... - 0xe5ffffff */
#define VMALLOC_END 0xe6000000
#define VMALLOC_END 0xe6000000UL
#endif /* __ASM_MACH_VMALLOC_H */
arch/arm/plat-omap/include/plat/sram.h
浏览文件 @ bb3613aa
......@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
......@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
static inline void omap_push_sram_idle(void) {}
#endif /* CONFIG_PM */
#endif /* __ASSEMBLY__ */
/*
* OMAP2+: define the SRAM PA addresses.
* Used by the SRAM management code and the idle sleep code.
*/
#define OMAP2_SRAM_PA 0x40200000
#define OMAP3_SRAM_PA 0x40200000
#define OMAP4_SRAM_PA 0x40300000
#endif
arch/arm/plat-omap/sram.c
浏览文件 @ bb3613aa
......@@ -41,15 +41,12 @@
#define OMAP1_SRAM_PA 0x20000000
#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP2_SRAM_VA 0xfe400000
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xfe400000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
#define OMAP4_SRAM_PA 0x40300000
#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
......
arch/arm/plat-s3c24xx/Kconfig
浏览文件 @ bb3613aa
......@@ -8,7 +8,7 @@ config PLAT_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_DEVICE_NAND
select S3C_DEV_NAND
select S3C_GPIO_CFG_S3C24XX
help
Base platform code for any Samsung S3C24XX device
......
arch/mips/Kconfig
浏览文件 @ bb3613aa
......@@ -19,6 +19,8 @@ config MIPS
select GENERIC_ATOMIC64 if !64BIT
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
menu "Machine selection"
......@@ -1664,6 +1666,28 @@ config PAGE_SIZE_64KB
endchoice
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
range 11 64
default "11"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
increase this value.
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
The page size is not necessarily 4KB. Keep this in mind
when choosing a value for this option.
config BOARD_SCACHE
bool
......@@ -1921,20 +1945,6 @@ config CPU_R4000_WORKAROUNDS
config CPU_R4400_WORKAROUNDS
bool
#
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
bool
default y
config GENERIC_IRQ_PROBE
bool
default y
config IRQ_PER_CPU
bool
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
......
arch/mips/alchemy/common/platform.c
浏览文件 @ bb3613aa
......@@ -27,6 +27,7 @@
static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
unsigned int old_state)
{
#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
......@@ -49,6 +50,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
serial8250_do_pm(port, state, old_state);
break;
}
#endif
}
#define PORT(_base, _irq) \
......
arch/mips/alchemy/devboards/prom.c
浏览文件 @ bb3613aa
......@@ -54,10 +54,9 @@ void __init prom_init(void)
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
else
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
......
arch/mips/ar7/clock.c
浏览文件 @ bb3613aa
......@@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
calculate(base_clock, frequency, &prediv, &postdiv, &mul);
writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
msleep(1);
mdelay(1);
writel(4, &clock->pll);
while (readl(&clock->pll) & PLL_STATUS)
;
writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
msleep(75);
mdelay(75);
}
static void __init tnetd7300_init_clocks(void)
......@@ -456,7 +456,7 @@ void clk_put(struct clk *clk)
}
EXPORT_SYMBOL(clk_put);
int __init ar7_init_clocks(void)
void __init ar7_init_clocks(void)
{
switch (ar7_chip_id()) {
case AR7_CHIP_7100:
......@@ -472,7 +472,4 @@ int __init ar7_init_clocks(void)
}
/* adjust vbus clock rate */
vbus_clk.rate = bus_clk.rate / 2;
return 0;
}
arch_initcall(ar7_init_clocks);
arch/mips/ar7/time.c
浏览文件 @ bb3613aa
......@@ -30,6 +30,9 @@ void __init plat_time_init(void)
{
struct clk *cpu_clk;
/* Initialize ar7 clocks so the CPU clock frequency is correct */
ar7_init_clocks();
cpu_clk = clk_get(NULL, "cpu");
if (IS_ERR(cpu_clk)) {
printk(KERN_ERR "unable to get cpu clock\n");
......
arch/mips/bcm47xx/setup.c
浏览文件 @ bb3613aa
......@@ -32,7 +32,6 @@
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
#include <asm/fw/cfe/cfe_api.h>
#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
......@@ -57,68 +56,112 @@ static void bcm47xx_machine_halt(void)
cpu_relax();
}
static void str2eaddr(char *str, char *dest)
{
int i = 0;
#define READ_FROM_NVRAM(_outvar, name, buf) \
if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
sprom->_outvar = simple_strtoul(buf, NULL, 0);
if (str == NULL) {
memset(dest, 0, 6);
return;
static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
{
char buf[100];
u32 boardflags;
memset(sprom, 0, sizeof(struct ssb_sprom));
sprom->revision = 1; /* Fallback: Old hardware does not define this. */
READ_FROM_NVRAM(revision, "sromrev", buf);
if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
nvram_parse_macaddr(buf, sprom->il0mac);
if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
nvram_parse_macaddr(buf, sprom->et0mac);
if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
nvram_parse_macaddr(buf, sprom->et1mac);
READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
READ_FROM_NVRAM(board_rev, "boardrev", buf);
READ_FROM_NVRAM(country_code, "ccode", buf);
READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
READ_FROM_NVRAM(tri2g, "tri2g", buf);
READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
READ_FROM_NVRAM(tri5g, "tri5g", buf);
READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
boardflags = simple_strtoul(buf, NULL, 0);
if (boardflags) {
sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
}
}
for (;;) {
dest[i++] = (char) simple_strtoul(str, NULL, 16);
str += 2;
if (!*str++ || i == 6)
break;
if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
boardflags = simple_strtoul(buf, NULL, 0);
if (boardflags) {
sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
}
}
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
char buf[100];
char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
else
iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
/* Fill sprom structure */
memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
iv->sprom.revision = 3;
if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et0mac);
bcm47xx_fill_sprom(&iv->sprom);
if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et1mac);
if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
......@@ -126,12 +169,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
void __init plat_mem_setup(void)
{
int err;
char buf[100];
struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
mcore = &ssb_bcm47xx.mipscore;
if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
if (strstr(buf, "console=ttyS1")) {
struct ssb_serial_port port;
printk(KERN_DEBUG "Swapping serial ports!\n");
/* swap serial ports */
memcpy(&port, &mcore->serial_ports[0], sizeof(port));
memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
sizeof(port));
memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
......
arch/mips/include/asm/cpu.h
浏览文件 @ bb3613aa
......@@ -111,8 +111,8 @@
* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
*/
#define PRID_IMP_BMIPS4KC 0x4000
#define PRID_IMP_BMIPS32 0x8000
#define PRID_IMP_BMIPS32_REV4 0x4000
#define PRID_IMP_BMIPS32_REV8 0x8000
#define PRID_IMP_BMIPS3300 0x9000
#define PRID_IMP_BMIPS3300_ALT 0x9100
#define PRID_IMP_BMIPS3300_BUG 0x0000
......
arch/mips/include/asm/elf.h
浏览文件 @ bb3613aa
......@@ -249,7 +249,8 @@ extern struct mips_abi mips_abi_n32;
#define SET_PERSONALITY(ex) \
do { \
set_personality(PER_LINUX); \
if (personality(current->personality) != PER_LINUX) \
set_personality(PER_LINUX); \
\
current->thread.abi = &mips_abi; \
} while (0)
......@@ -296,6 +297,8 @@ do { \
#define SET_PERSONALITY(ex) \
do { \
unsigned int p; \
\
clear_thread_flag(TIF_32BIT_REGS); \
clear_thread_flag(TIF_32BIT_ADDR); \
\
......@@ -304,7 +307,8 @@ do { \
else \
current->thread.abi = &mips_abi; \
\
if (current->personality != PER_LINUX32) \
p = personality(current->personality); \
if (p != PER_LINUX32 && p != PER_LINUX) \
set_personality(PER_LINUX); \
} while (0)
......
arch/mips/include/asm/io.h
浏览文件 @ bb3613aa
......@@ -329,10 +329,14 @@ static inline void pfx##write##bwlq(type val, \
"dsrl32 %L0, %L0, 0" "\n\t" \
"dsll32 %M0, %M0, 0" "\n\t" \
"or %L0, %L0, %M0" "\n\t" \
".set push" "\n\t" \
".set noreorder" "\n\t" \
".set nomacro" "\n\t" \
"sd %L0, %2" "\n\t" \
".set pop" "\n\t" \
".set mips0" "\n" \
: "=r" (__tmp) \
: "0" (__val), "m" (*__mem)); \
: "0" (__val), "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else \
......@@ -355,12 +359,16 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
".set push" "\n\t" \
".set noreorder" "\n\t" \
".set nomacro" "\n\t" \
"ld %L0, %1" "\n\t" \
".set pop" "\n\t" \
"dsra32 %M0, %L0, 0" "\n\t" \
"sll %L0, %L0, 0" "\n\t" \
".set mips0" "\n" \
: "=r" (__val) \
: "m" (*__mem)); \
: "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else { \
......
arch/mips/include/asm/mach-ar7/ar7.h
浏览文件 @ bb3613aa
......@@ -201,7 +201,6 @@ static inline void ar7_device_off(u32 bit)
}
int __init ar7_gpio_init(void);
int __init ar7_gpio_init(void);
void __init ar7_init_clocks(void);
#endif /* __AR7_H__ */
arch/mips/include/asm/mach-bcm47xx/nvram.h
浏览文件 @ bb3613aa
......@@ -12,6 +12,7 @@
#define __NVRAM_H
#include <linux/types.h>
#include <linux/kernel.h>
struct nvram_header {
u32 magic;
......@@ -36,4 +37,10 @@ struct nvram_header {
extern int nvram_getenv(char *name, char *val, size_t val_len);
static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
{
sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
&macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
}
#endif
arch/mips/jz4740/board-qi_lb60.c
浏览文件 @ bb3613aa
......@@ -5,7 +5,7 @@
*
* Copyright (c) 2009 Qi Hardware inc.,
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
* Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
* Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or later
......@@ -235,7 +235,7 @@ static const unsigned int qi_lb60_keypad_rows[] = {
QI_LB60_GPIO_KEYIN(3),
QI_LB60_GPIO_KEYIN(4),
QI_LB60_GPIO_KEYIN(5),
QI_LB60_GPIO_KEYIN(7),
QI_LB60_GPIO_KEYIN(6),
QI_LB60_GPIO_KEYIN8,
};
......
arch/mips/jz4740/platform.c
浏览文件 @ bb3613aa
......@@ -208,7 +208,7 @@ struct platform_device jz4740_i2s_device = {
/* PCM */
struct platform_device jz4740_pcm_device = {
.name = "jz4740-pcm",
.name = "jz4740-pcm-audio",
.id = -1,
};
......
arch/mips/jz4740/prom.c
浏览文件 @ bb3613aa
......@@ -23,7 +23,7 @@
#include <asm/bootinfo.h>
#include <asm/mach-jz4740/base.h>
void jz4740_init_cmdline(int argc, char *argv[])
static __init void jz4740_init_cmdline(int argc, char *argv[])
{
unsigned int count = COMMAND_LINE_SIZE - 1;
int i;
......
arch/mips/kernel/cevt-r4k.c
浏览文件 @ bb3613aa
......@@ -32,7 +32,7 @@ static int mips_next_event(unsigned long delta,
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
......
arch/mips/kernel/cpu-probe.c
浏览文件 @ bb3613aa
......@@ -905,7 +905,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_BMIPS32:
case PRID_IMP_BMIPS32_REV4:
case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
__cpu_name[cpu] = "Broadcom BMIPS32";
break;
......@@ -933,10 +934,6 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "Broadcom BMIPS5000";
c->options |= MIPS_CPU_ULRI;
break;
case PRID_IMP_BMIPS4KC:
c->cputype = CPU_4KC;
__cpu_name[cpu] = "MIPS 4Kc";
break;
}
}
......
arch/mips/kernel/linux32.c
浏览文件 @ bb3613aa
......@@ -251,14 +251,15 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
unsigned int p = personality & 0xffffffff;
int ret;
personality &= 0xffffffff;
if (personality(current->personality) == PER_LINUX32 &&
personality == PER_LINUX)
personality = PER_LINUX32;
ret = sys_personality(personality);
if (ret == PER_LINUX32)
ret = PER_LINUX;
personality(p) == PER_LINUX)
p = (p & ~PER_MASK) | PER_LINUX32;
ret = sys_personality(p);
if (ret != -1 && personality(ret) == PER_LINUX32)
ret = (ret & ~PER_MASK) | PER_LINUX;
return ret;
}
......
arch/mips/kernel/process.c
浏览文件 @ bb3613aa
......@@ -142,7 +142,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
childregs->regs[7] = 0; /* Clear error flag */
childregs->regs[2] = 0; /* Child gets zero as return value */
regs->regs[2] = p->pid;
if (childregs->cp0_status & ST0_CU0) {
childregs->regs[28] = (unsigned long) ti;
......
arch/mips/kernel/prom.c
浏览文件 @ bb3613aa
......@@ -100,7 +100,7 @@ void __init device_tree_init(void)
return;
base = virt_to_phys((void *)initial_boot_params);
size = initial_boot_params->totalsize;
size = be32_to_cpu(initial_boot_params->totalsize);
/* Before we do anything, lets reserve the dt blob */
reserve_mem_mach(base, size);
......
arch/mips/kernel/smp-mt.c
浏览文件 @ bb3613aa
......@@ -153,7 +153,7 @@ static void __cpuinit vsmp_init_secondary(void)
{
extern int gic_present;
/* This is Malta specific: IPI,performance and timer inetrrupts */
/* This is Malta specific: IPI,performance and timer interrupts */
if (gic_present)
change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
STATUSF_IP6 | STATUSF_IP7);
......
arch/mips/kernel/traps.c
浏览文件 @ bb3613aa
......@@ -83,7 +83,8 @@ extern asmlinkage void handle_mcheck(void);
extern asmlinkage void handle_reserved(void);
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_struct *ctx, int has_fpu);
struct mips_fpu_struct *ctx, int has_fpu,
void *__user *fault_addr);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
......@@ -661,12 +662,36 @@ asmlinkage void do_ov(struct pt_regs *regs)
force_sig_info(SIGFPE, &info, current);
}
static int process_fpemu_return(int sig, void __user *fault_addr)
{
if (sig == SIGSEGV || sig == SIGBUS) {
struct siginfo si = {0};
si.si_addr = fault_addr;
si.si_signo = sig;
if (sig == SIGSEGV) {
if (find_vma(current->mm, (unsigned long)fault_addr))
si.si_code = SEGV_ACCERR;
else
si.si_code = SEGV_MAPERR;
} else {
si.si_code = BUS_ADRERR;
}
force_sig_info(sig, &si, current);
return 1;
} else if (sig) {
force_sig(sig, current);
return 1;
} else {
return 0;
}
}
/*
* XXX Delayed fp exceptions when doing a lazy ctx switch XXX
*/
asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
{
siginfo_t info;
siginfo_t info = {0};
if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
== NOTIFY_STOP)
......@@ -675,6 +700,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
if (fcr31 & FPU_CSR_UNI_X) {
int sig;
void __user *fault_addr = NULL;
/*
* Unimplemented operation exception. If we've got the full
......@@ -690,7 +716,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
lose_fpu(1);
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1);
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
/*
* We can't allow the emulated instruction to leave any of
......@@ -702,8 +729,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
own_fpu(1); /* Using the FPU again. */
/* If something went wrong, signal */
if (sig)
force_sig(sig, current);
process_fpemu_return(sig, fault_addr);
return;
} else if (fcr31 & FPU_CSR_INV_X)
......@@ -996,11 +1022,11 @@ asmlinkage void do_cpu(struct pt_regs *regs)
if (!raw_cpu_has_fpu) {
int sig;
void __user *fault_addr = NULL;
sig = fpu_emulator_cop1Handler(regs,
&current->thread.fpu, 0);
if (sig)
force_sig(sig, current);
else
&current->thread.fpu,
0, &fault_addr);
if (!process_fpemu_return(sig, fault_addr))
mt_ase_fp_affinity();
}
......
arch/mips/kernel/vpe.c
浏览文件 @ bb3613aa
......@@ -1092,6 +1092,10 @@ static int vpe_open(struct inode *inode, struct file *filp)
/* this of-course trashes what was there before... */
v->pbuffer = vmalloc(P_SIZE);
if (!v->pbuffer) {
pr_warning("VPE loader: unable to allocate memory\n");
return -ENOMEM;
}
v->plen = P_SIZE;
v->load_addr = NULL;
v->len = 0;
......@@ -1149,10 +1153,9 @@ static int vpe_release(struct inode *inode, struct file *filp)
if (ret < 0)
v->shared_ptr = NULL;
// cleanup any temp buffers
if (v->pbuffer)
vfree(v->pbuffer);
vfree(v->pbuffer);
v->plen = 0;
return ret;
}
......@@ -1169,11 +1172,6 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer,
if (v == NULL)
return -ENODEV;
if (v->pbuffer == NULL) {
printk(KERN_ERR "VPE loader: no buffer for program\n");
return -ENOMEM;
}
if ((count + v->len) > v->plen) {
printk(KERN_WARNING
"VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
......
arch/mips/lib/memset.S
浏览文件 @ bb3613aa
......@@ -161,16 +161,16 @@ FEXPORT(__bzero)
.Lfwd_fixup:
PTR_L t0, TI_TASK($28)
LONG_L t0, THREAD_BUADDR(t0)
andi a2, 0x3f
LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
.Lpartial_fixup:
PTR_L t0, TI_TASK($28)
LONG_L t0, THREAD_BUADDR(t0)
andi a2, LONGMASK
LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
......
arch/mips/loongson/common/env.c
浏览文件 @ bb3613aa
......@@ -29,9 +29,9 @@ unsigned long memsize, highmemsize;
#define parse_even_earlier(res, option, p) \
do { \
int ret; \
if (strncmp(option, (char *)p, strlen(option)) == 0) \
strict_strtol((char *)p + strlen(option"="), \
10, &res); \
ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
} while (0)
void __init prom_init_env(void)
......
arch/mips/math-emu/cp1emu.c
浏览文件 @ bb3613aa
......@@ -64,7 +64,7 @@ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
#if __mips >= 4 && __mips != 32
static int fpux_emu(struct pt_regs *,
struct mips_fpu_struct *, mips_instruction);
struct mips_fpu_struct *, mips_instruction, void *__user *);
#endif
/* Further private data for which no space exists in mips_fpu_struct */
......@@ -208,16 +208,23 @@ static inline int cop1_64bit(struct pt_regs *xcp)
* Two instructions if the instruction is in a branch delay slot.
*/
static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
void *__user *fault_addr)
{
mips_instruction ir;
unsigned long emulpc, contpc;
unsigned int cond;
if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGSEGV;
}
/* XXX NEC Vr54xx bug workaround */
if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
......@@ -245,10 +252,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
#endif
return SIGILL;
}
if (get_user(ir, (mips_instruction __user *) emulpc)) {
if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)emulpc;
return SIGBUS;
}
if (__get_user(ir, (mips_instruction __user *) emulpc)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)emulpc;
return SIGSEGV;
}
/* __compute_return_epc() will have updated cp0_epc */
contpc = xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
......@@ -269,10 +282,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
u64 val;
MIPS_FPU_EMU_INC_STATS(loads);
if (get_user(val, va)) {
if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__get_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
DITOREG(val, MIPSInst_RT(ir));
break;
}
......@@ -284,10 +304,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_RT(ir));
if (put_user(val, va)) {
if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__put_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
break;
}
......@@ -297,10 +323,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
u32 val;
MIPS_FPU_EMU_INC_STATS(loads);
if (get_user(val, va)) {
if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__get_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
SITOREG(val, MIPSInst_RT(ir));
break;
}
......@@ -312,10 +344,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_RT(ir));
if (put_user(val, va)) {
if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__put_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
break;
}
......@@ -440,11 +478,18 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
contpc = (xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
if (get_user(ir,
(mips_instruction __user *) xcp->cp0_epc)) {
if (!access_ok(VERIFY_READ, xcp->cp0_epc,
sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
if (__get_user(ir,
(mips_instruction __user *) xcp->cp0_epc)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGSEGV;
}
switch (MIPSInst_OPCODE(ir)) {
case lwc1_op:
......@@ -506,9 +551,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
#if __mips >= 4 && __mips != 32
case cop1x_op:{
int sig;
if ((sig = fpux_emu(xcp, ctx, ir)))
int sig = fpux_emu(xcp, ctx, ir, fault_addr);
if (sig)
return sig;
break;
}
......@@ -604,7 +648,7 @@ DEF3OP(nmadd, dp, ieee754dp_mul, ieee754dp_add, ieee754dp_neg);
DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
mips_instruction ir)
mips_instruction ir, void *__user *fault_addr)
{
unsigned rcsr = 0; /* resulting csr */
......@@ -624,10 +668,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
if (get_user(val, va)) {
if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__get_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
SITOREG(val, MIPSInst_FD(ir));
break;
......@@ -638,10 +688,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_FS(ir));
if (put_user(val, va)) {
if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (put_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
break;
case madd_s_op:
......@@ -701,10 +757,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
if (get_user(val, va)) {
if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__get_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
DITOREG(val, MIPSInst_FD(ir));
break;
......@@ -714,10 +776,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_FS(ir));
if (put_user(val, va)) {
if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGBUS;
}
if (__put_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = va;
return SIGSEGV;
}
break;
case madd_d_op:
......@@ -1242,7 +1310,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
}
int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
int has_fpu)
int has_fpu, void *__user *fault_addr)
{
unsigned long oldepc, prevepc;
mips_instruction insn;
......@@ -1252,10 +1320,16 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
do {
prevepc = xcp->cp0_epc;
if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
MIPS_FPU_EMU_INC_STATS(errors);
*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGSEGV;
}
if (insn == 0)
xcp->cp0_epc += 4; /* skip nops */
else {
......@@ -1267,7 +1341,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
*/
/* convert to ieee library modes */
ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
sig = cop1Emulate(xcp, ctx);
sig = cop1Emulate(xcp, ctx, fault_addr);
/* revert to mips rounding mode */
ieee754_csr.rm = mips_rm[ieee754_csr.rm];
}
......
arch/mips/mm/dma-default.c
浏览文件 @ bb3613aa
......@@ -288,7 +288,7 @@ int mips_dma_supported(struct device *dev, u64 mask)
return plat_dma_supported(dev, mask);
}
void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
......@@ -298,6 +298,8 @@ void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
__dma_sync((unsigned long)vaddr, size, direction);
}
EXPORT_SYMBOL(dma_cache_sync);
static struct dma_map_ops mips_default_dma_map_ops = {
.alloc_coherent = mips_dma_alloc_coherent,
.free_coherent = mips_dma_free_coherent,
......
arch/mips/mm/sc-mips.c
浏览文件 @ bb3613aa
......@@ -68,6 +68,9 @@ static struct bcache_ops mips_sc_ops = {
*/
static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
{
unsigned int config2 = read_c0_config2();
unsigned int tmp;
/* Check the bypass bit (L2B) */
switch (c->cputype) {
case CPU_34K:
......@@ -83,6 +86,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
c->scache.linesz = 2 << tmp;
else
return 0;
return 1;
}
static inline int __init mips_sc_probe(void)
......
arch/mips/pmc-sierra/yosemite/py-console.c
浏览文件 @ bb3613aa
......@@ -65,11 +65,15 @@ static unsigned char readb_outer_space(unsigned long long phys)
__asm__ __volatile__ (
" .set mips3 \n"
" .set push \n"
" .set noreorder \n"
" .set nomacro \n"
" ld %0, %1 \n"
" .set pop \n"
" lbu %0, (%0) \n"
" .set mips0 \n"
: "=r" (res)
: "m" (vaddr));
: "R" (vaddr));
write_c0_status(sr);
ssnop_4();
......@@ -89,11 +93,15 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c)
__asm__ __volatile__ (
" .set mips3 \n"
" .set push \n"
" .set noreorder \n"
" .set nomacro \n"
" ld %0, %1 \n"
" .set pop \n"
" sb %2, (%0) \n"
" .set mips0 \n"
: "=&r" (tmp)
: "m" (vaddr), "r" (c));
: "R" (vaddr), "r" (c));
write_c0_status(sr);
ssnop_4();
......
arch/mips/sibyte/swarm/setup.c
浏览文件 @ bb3613aa
......@@ -82,7 +82,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
enum swarm_rtc_type {
RTC_NONE,
RTC_XICOR,
RTC_M4LT81
RTC_M41T81,
};
enum swarm_rtc_type swarm_rtc_type;
......@@ -96,7 +96,7 @@ void read_persistent_clock(struct timespec *ts)
sec = xicor_get_time();
break;
case RTC_M4LT81:
case RTC_M41T81:
sec = m41t81_get_time();
break;
......@@ -115,7 +115,7 @@ int rtc_mips_set_time(unsigned long sec)
case RTC_XICOR:
return xicor_set_time(sec);
case RTC_M4LT81:
case RTC_M41T81:
return m41t81_set_time(sec);
case RTC_NONE:
......@@ -141,7 +141,7 @@ void __init plat_mem_setup(void)
if (xicor_probe())
swarm_rtc_type = RTC_XICOR;
if (m41t81_probe())
swarm_rtc_type = RTC_M4LT81;
swarm_rtc_type = RTC_M41T81;
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
......
arch/mn10300/kernel/time.c
浏览文件 @ bb3613aa
......@@ -40,21 +40,17 @@ unsigned long long sched_clock(void)
unsigned long long ll;
unsigned l[2];
} tsc64, result;
unsigned long tsc, tmp;
unsigned long tmp;
unsigned product[3]; /* 96-bit intermediate value */
/* cnt32_to_63() is not safe with preemption */
preempt_disable();
/* read the TSC value
*/
tsc = get_cycles();
/* expand to 64-bits.
/* expand the tsc to 64-bits.
* - sched_clock() must be called once a minute or better or the
* following will go horribly wrong - see cnt32_to_63()
*/
tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;
preempt_enable();
......
arch/tile/include/asm/signal.h
浏览文件 @ bb3613aa
......@@ -25,7 +25,7 @@
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
struct pt_regs;
int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
void do_signal(struct pt_regs *regs);
#endif
......
arch/tile/kernel/compat_signal.c
浏览文件 @ bb3613aa
......@@ -290,12 +290,12 @@ long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
return ret;
}
/* The assembly shim for this function arranges to ignore the return value. */
long compat_sys_rt_sigreturn(struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame =
(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
sigset_t set;
long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
......@@ -308,13 +308,13 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
goto badframe;
return r0;
return 0;
badframe:
force_sig(SIGSEGV, current);
......
arch/tile/kernel/intvec_32.S
浏览文件 @ bb3613aa
......@@ -1342,8 +1342,8 @@ handle_syscall:
lw r20, r20
/* Jump to syscall handler. */
jalr r20; .Lhandle_syscall_link:
FEEDBACK_REENTER(handle_syscall)
jalr r20
.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
/*
* Write our r0 onto the stack so it gets restored instead
......@@ -1352,6 +1352,9 @@ handle_syscall:
PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
sw r29, r0
.Lsyscall_sigreturn_skip:
FEEDBACK_REENTER(handle_syscall)
/* Do syscall trace again, if requested. */
lw r30, r31
andi r30, r30, _TIF_SYSCALL_TRACE
......@@ -1536,9 +1539,24 @@ STD_ENTRY_LOCAL(bad_intr)
}; \
STD_ENDPROC(_##x)
/*
* Special-case sigreturn to not write r0 to the stack on return.
* This is technically more efficient, but it also avoids difficulties
* in the 64-bit OS when handling 32-bit compat code, since we must not
* sign-extend r0 for the sigreturn return-value case.
*/
#define PTREGS_SYSCALL_SIGRETURN(x, reg) \
STD_ENTRY(_##x); \
addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
{ \
PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
j x \
}; \
STD_ENDPROC(_##x)
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
PTREGS_SYSCALL(sys_rt_sigreturn, r0)
PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
......
arch/tile/kernel/process.c
浏览文件 @ bb3613aa
......@@ -211,6 +211,13 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
childregs->regs[0] = 0; /* return value is zero */
childregs->sp = sp; /* override with new user stack pointer */
/*
* If CLONE_SETTLS is set, set "tp" in the new task to "r4",
* which is passed in as arg #5 to sys_clone().
*/
if (clone_flags & CLONE_SETTLS)
childregs->tp = regs->regs[4];
/*
* Copy the callee-saved registers from the passed pt_regs struct
* into the context-switch callee-saved registers area.
......@@ -539,6 +546,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
return __switch_to(prev, next, next_current_ksp0(next));
}
/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
void __user *, parent_tidptr, void __user *, child_tidptr,
struct pt_regs *, regs)
......
arch/tile/kernel/signal.c
浏览文件 @ bb3613aa
......@@ -52,7 +52,7 @@ SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
*/
int restore_sigcontext(struct pt_regs *regs,
struct sigcontext __user *sc, long *pr0)
struct sigcontext __user *sc)
{
int err = 0;
int i;
......@@ -75,17 +75,15 @@ int restore_sigcontext(struct pt_regs *regs,
regs->faultnum = INT_SWINT_1_SIGRETURN;
err |= __get_user(*pr0, &sc->gregs[0]);
return err;
}
/* sigreturn() returns long since it restores r0 in the interrupted code. */
/* The assembly shim for this function arranges to ignore the return value. */
SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->sp);
sigset_t set;
long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
......@@ -98,13 +96,13 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
return r0;
return 0;
badframe:
force_sig(SIGSEGV, current);
......
arch/x86/boot/compressed/misc.c
浏览文件 @ bb3613aa
......@@ -355,7 +355,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
error("Destination address too large");
#endif
#ifndef CONFIG_RELOCATABLE
......
arch/x86/include/asm/e820.h
浏览文件 @ bb3613aa
......@@ -72,6 +72,9 @@ struct e820map {
#define BIOS_BEGIN 0x000a0000
#define BIOS_END 0x00100000
#define BIOS_ROM_BASE 0xffe00000
#define BIOS_ROM_END 0xffffffff
#ifdef __KERNEL__
/* see comment in arch/x86/kernel/e820.c */
extern struct e820map e820;
......
arch/x86/include/asm/kvm_host.h
浏览文件 @ bb3613aa
......@@ -79,7 +79,7 @@
#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
#define KVM_MIN_FREE_MMU_PAGES 5
#define KVM_REFILL_PAGES 25
#define KVM_MAX_CPUID_ENTRIES 40
#define KVM_MAX_CPUID_ENTRIES 80
#define KVM_NR_FIXED_MTRR_REGION 88
#define KVM_NR_VAR_MTRR 8
......
arch/x86/kernel/Makefile
浏览文件 @ bb3613aa
......@@ -45,6 +45,7 @@ obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o
obj-y += tsc.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
obj-y += resource.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
......
arch/x86/kernel/apic/apic.c
浏览文件 @ bb3613aa
......@@ -1389,6 +1389,14 @@ void __cpuinit end_local_APIC_setup(void)
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
/*
* Now that local APIC setup is completed for BP, configure the fault
* handling for interrupt remapping.
*/
if (!smp_processor_id() && intr_remapping_enabled)
enable_drhd_fault_handling();
}
#ifdef CONFIG_X86_X2APIC
......
arch/x86/kernel/apic/io_apic.c
浏览文件 @ bb3613aa
......@@ -2430,13 +2430,12 @@ static void ack_apic_level(struct irq_data *data)
{
struct irq_cfg *cfg = data->chip_data;
int i, do_unmask_irq = 0, irq = data->irq;
struct irq_desc *desc = irq_to_desc(irq);
unsigned long v;
irq_complete_move(cfg);
#ifdef CONFIG_GENERIC_PENDING_IRQ
/* If we are moving the irq we need to mask it */
if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
do_unmask_irq = 1;
mask_ioapic(cfg);
}
......@@ -3413,6 +3412,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
msg.data |= MSI_DATA_VECTOR(cfg->vector);
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
dmar_msi_write(irq, &msg);
......
arch/x86/kernel/apic/probe_64.c
浏览文件 @ bb3613aa
......@@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void)
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
}
/*
* Now that apic routing model is selected, configure the
* fault handling for intr remapping.
*/
if (intr_remapping_enabled)
enable_drhd_fault_handling();
}
/* Same for both flat and physical. */
......
arch/x86/kernel/head_32.S
浏览文件 @ bb3613aa
......@@ -60,16 +60,18 @@
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
/* Number of possible pages in the lowmem region */
LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
/* Enough space to fit pagetables for the low memory linear map */
MAPPING_BEYOND_END = \
PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
/*
* Worst-case size of the kernel mapping we need to make:
* the worst-case size of the kernel itself, plus the extra we need
* to map for the linear map.
* a relocatable kernel can live anywhere in lowmem, so we need to be able
* to map all of lowmem.
*/
KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
KERNEL_PAGES = LOWMEM_PAGES
INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
RESERVE_BRK(pagetables, INIT_MAP_SIZE)
......@@ -620,13 +622,13 @@ ENTRY(initial_code)
__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
initial_pg_pmd:
ENTRY(initial_pg_pmd)
.fill 1024*KPMDS,4,0
#else
ENTRY(initial_page_table)
.fill 1024,4,0
#endif
initial_pg_fixmap:
ENTRY(initial_pg_fixmap)
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
......
arch/x86/kernel/hpet.c
浏览文件 @ bb3613aa
......@@ -27,6 +27,9 @@
#define HPET_DEV_FSB_CAP 0x1000
#define HPET_DEV_PERI_CAP 0x2000
#define HPET_MIN_CYCLES 128
#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
/*
......@@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void)
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
/* 5 usec minimum reprogramming delta. */
hpet_clockevent.min_delta_ns = 5000;
/* Setup minimum reprogramming delta. */
hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
&hpet_clockevent);
/*
* Start hpet with the boot cpu mask and make it
......@@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta,
* the wraparound into account) nor a simple count down event
* mode. Further the write to the comparator register is
* delayed internally up to two HPET clock cycles in certain
* chipsets (ATI, ICH9,10). We worked around that by reading
* back the compare register, but that required another
* workaround for ICH9,10 chips where the first readout after
* write can return the old stale value. We already have a
* minimum delta of 5us enforced, but a NMI or SMI hitting
* chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
* longer delays. We worked around that by reading back the
* compare register, but that required another workaround for
* ICH9,10 chips where the first readout after write can
* return the old stale value. We already had a minimum
* programming delta of 5us enforced, but a NMI or SMI hitting
* between the counter readout and the comparator write can
* move us behind that point easily. Now instead of reading
* the compare register back several times, we make the ETIME
* decision based on the following: Return ETIME if the
* counter value after the write is less than 8 HPET cycles
* counter value after the write is less than HPET_MIN_CYCLES
* away from the event or if the counter is already ahead of
* the event.
* the event. The minimum programming delta for the generic
* clockevents code is set to 1.5 * HPET_MIN_CYCLES.
*/
res = (s32)(cnt - hpet_readl(HPET_COUNTER));
return res < 8 ? -ETIME : 0;
return res < HPET_MIN_CYCLES ? -ETIME : 0;
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
......
arch/x86/kernel/resource.c 0 → 100644
浏览文件 @ bb3613aa
#include <linux/ioport.h>
#include <asm/e820.h>
static void resource_clip(struct resource *res, resource_size_t start,
resource_size_t end)
{
resource_size_t low = 0, high = 0;
if (res->end < start || res->start > end)
return; /* no conflict */
if (res->start < start)
low = start - res->start;
if (res->end > end)
high = res->end - end;
/* Keep the area above or below the conflict, whichever is larger */
if (low > high)
res->end = start - 1;
else
res->start = end + 1;
}
static void remove_e820_regions(struct resource *avail)
{
int i;
struct e820entry *entry;
for (i = 0; i < e820.nr_map; i++) {
entry = &e820.map[i];
resource_clip(avail, entry->addr,
entry->addr + entry->size - 1);
}
}
void arch_remove_reservations(struct resource *avail)
{
/* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
if (avail->flags & IORESOURCE_MEM) {
if (avail->start < BIOS_END)
avail->start = BIOS_END;
resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
remove_e820_regions(avail);
}
}
arch/x86/kernel/setup.c
浏览文件 @ bb3613aa
......@@ -769,7 +769,6 @@ void __init setup_arch(char **cmdline_p)
x86_init.oem.arch_setup();
resource_alloc_from_bottom = 0;
iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
setup_memory_map();
parse_setup_data();
......
arch/x86/kernel/xsave.c
浏览文件 @ bb3613aa
......@@ -394,7 +394,8 @@ static void __init setup_xstate_init(void)
* Setup init_xstate_buf to represent the init state of
* all the features managed by the xsave
*/
init_xstate_buf = alloc_bootmem(xstate_size);
init_xstate_buf = alloc_bootmem_align(xstate_size,
__alignof__(struct xsave_struct));
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
clts();
......
arch/x86/kvm/svm.c
浏览文件 @ bb3613aa
......@@ -3494,6 +3494,10 @@ static void svm_cpuid_update(struct kvm_vcpu *vcpu)
static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
{
switch (func) {
case 0x00000001:
/* Mask out xsave bit as long as it is not supported by SVM */
entry->ecx &= ~(bit(X86_FEATURE_XSAVE));
break;
case 0x80000001:
if (nested)
entry->ecx |= (1 << 2); /* Set SVM bit */
......
arch/x86/kvm/vmx.c
浏览文件 @ bb3613aa
......@@ -4227,11 +4227,6 @@ static int vmx_get_lpage_level(void)
return PT_PDPE_LEVEL;
}
static inline u32 bit(int bitno)
{
return 1 << (bitno & 31);
}
static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
......
arch/x86/kvm/x86.c
浏览文件 @ bb3613aa
......@@ -155,11 +155,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
u64 __read_mostly host_xcr0;
static inline u32 bit(int bitno)
{
return 1 << (bitno & 31);
}
static void kvm_on_user_return(struct user_return_notifier *urn)
{
unsigned slot;
......@@ -4569,9 +4564,11 @@ static void kvm_timer_init(void)
#ifdef CONFIG_CPU_FREQ
struct cpufreq_policy policy;
memset(&policy, 0, sizeof(policy));
cpufreq_get_policy(&policy, get_cpu());
cpu = get_cpu();
cpufreq_get_policy(&policy, cpu);
if (policy.cpuinfo.max_freq)
max_tsc_khz = policy.cpuinfo.max_freq;
put_cpu();
#endif
cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
......@@ -5522,6 +5519,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
if (sregs->cr4 & X86_CR4_OSXSAVE)
update_cpuid(vcpu);
if (!is_long_mode(vcpu) && is_pae(vcpu)) {
load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3);
mmu_reset_needed = 1;
......
arch/x86/kvm/x86.h
浏览文件 @ bb3613aa
......@@ -70,6 +70,11 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
}
static inline u32 bit(int bitno)
{
return 1 << (bitno & 31);
}
void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq);
......
arch/x86/lguest/boot.c
浏览文件 @ bb3613aa
......@@ -531,7 +531,10 @@ static void lguest_write_cr3(unsigned long cr3)
{
lguest_data.pgdir = cr3;
lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
cr3_changed = true;
/* These two page tables are simple, linear, and used during boot */
if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table))
cr3_changed = true;
}
static unsigned long lguest_read_cr3(void)
......@@ -703,9 +706,9 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
* to forget all of them. Fortunately, this is very rare.
*
* ... except in early boot when the kernel sets up the initial pagetables,
* which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
* the Host anything changed until we've done the first page table switch,
* which brings boot back to 0.25 seconds.
* which makes booting astonishingly slow: 48 seconds! So we don't even tell
* the Host anything changed until we've done the first real page table switch,
* which brings boot back to 4.3 seconds.
*/
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
......@@ -1002,7 +1005,7 @@ static void lguest_time_init(void)
clockevents_register_device(&lguest_clockevent);
/* Finally, we unblock the timer interrupt. */
enable_lguest_irq(0);
clear_bit(0, lguest_data.blocked_interrupts);
}
/*
......@@ -1349,9 +1352,6 @@ __init void lguest_init(void)
*/
switch_to_new_gdt(0);
/* We actually boot with all memory mapped, but let's say 128MB. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
/*
* The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
......
arch/x86/lguest/i386_head.S
浏览文件 @ bb3613aa
......@@ -4,6 +4,7 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
#include <asm/pgtable.h>
/*G:020
* Our story starts with the kernel booting into startup_32 in
......@@ -37,9 +38,113 @@ ENTRY(lguest_entry)
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
call init_pagetables
/* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
/*
* Initialize page tables. This creates a PDE and a set of page
* tables, which are located immediately beyond __brk_base. The variable
* _brk_end is set up to point to the first "safe" location.
* Mappings are created both at virtual address 0 (identity mapping)
* and PAGE_OFFSET for up to _end.
*
* FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they
* don't have a stack at this point, so we can't just use call and ret.
*/
init_pagetables:
#if PTRS_PER_PMD > 1
#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
#else
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
#define pa(X) ((X) - __PAGE_OFFSET)
/* Enough space to fit pagetables for the low memory linear map */
MAPPING_BEYOND_END = \
PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
#ifdef CONFIG_X86_PAE
/*
* In PAE mode initial_page_table is statically defined to contain
* enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3
* entries). The identity mapping is handled by pointing two PGD entries
* to the first kernel PMD.
*
* Note the upper half of each PMD or PTE are always zero at this stage.
*/
#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
xorl %ebx,%ebx /* %ebx is kept at zero */
movl $pa(__brk_base), %edi
movl $pa(initial_pg_pmd), %edx
movl $PTE_IDENT_ATTR, %eax
10:
leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */
movl %ecx,(%edx) /* Store PMD entry */
/* Upper half already zero */
addl $8,%edx
movl $512,%ecx
11:
stosl
xchgl %eax,%ebx
stosl
xchgl %eax,%ebx
addl $0x1000,%eax
loop 11b
/*
* End condition: we must map up to the end + MAPPING_BEYOND_END.
*/
movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
cmpl %ebp,%eax
jb 10b
1:
addl $__PAGE_OFFSET, %edi
movl %edi, pa(_brk_end)
shrl $12, %eax
movl %eax, pa(max_pfn_mapped)
/* Do early initialization of the fixmap area */
movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
#else /* Not PAE */
page_pde_offset = (__PAGE_OFFSET >> 20);
movl $pa(__brk_base), %edi
movl $pa(initial_page_table), %edx
movl $PTE_IDENT_ATTR, %eax
10:
leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */
movl %ecx,(%edx) /* Store identity PDE entry */
movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
addl $4,%edx
movl $1024, %ecx
11:
stosl
addl $0x1000,%eax
loop 11b
/*
* End condition: we must map up to the end + MAPPING_BEYOND_END.
*/
movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
cmpl %ebp,%eax
jb 10b
addl $__PAGE_OFFSET, %edi
movl %edi, pa(_brk_end)
shrl $12, %eax
movl %eax, pa(max_pfn_mapped)
/* Do early initialization of the fixmap area */
movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
movl %eax,pa(initial_page_table+0xffc)
#endif
ret
/*G:055
* We create a macro which puts the assembler code between lgstart_ and lgend_
* markers. These templates are put in the .text section: they can't be
......
arch/x86/pci/i386.c
浏览文件 @ bb3613aa
......@@ -65,21 +65,13 @@ pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
resource_size_t start = round_down(res->end - size + 1, align);
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
/*
* If we're avoiding ISA aliases, the largest contiguous I/O
* port space is 256 bytes. Clearing bits 9 and 10 preserves
* all 256-byte and smaller alignments, so the result will
* still be correctly aligned.
*/
if (!skip_isa_ioresource_align(dev))
start &= ~0x300;
} else if (res->flags & IORESOURCE_MEM) {
if (start < BIOS_END)
start = res->end; /* fail; no space */
if (skip_isa_ioresource_align(dev))
return start;
if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
}
return start;
}
......
arch/x86/vdso/Makefile
浏览文件 @ bb3613aa
......@@ -25,7 +25,7 @@ targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y)
export CPPFLAGS_vdso.lds += -P -C
VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \
VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
......@@ -69,7 +69,7 @@ vdso32.so-$(VDSO32-y) += sysenter
vdso32-images = $(vdso32.so-y:%=vdso32-%.so)
CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1
VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
# This makes sure the $(obj) subdirectory exists even though vdso32/
# is not a kbuild sub-make subdirectory.
......
block/blk-map.c
浏览文件 @ bb3613aa
......@@ -201,12 +201,13 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
for (i = 0; i < iov_count; i++) {
unsigned long uaddr = (unsigned long)iov[i].iov_base;
if (!iov[i].iov_len)
return -EINVAL;
if (uaddr & queue_dma_alignment(q)) {
unaligned = 1;
break;
}
if (!iov[i].iov_len)
return -EINVAL;
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
......
block/blk-merge.c
浏览文件 @ bb3613aa
......@@ -21,7 +21,7 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
return 0;
fbio = bio;
cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
cluster = blk_queue_cluster(q);
seg_size = 0;
nr_phys_segs = 0;
for_each_bio(bio) {
......@@ -87,7 +87,7 @@ EXPORT_SYMBOL(blk_recount_segments);
static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio,
struct bio *nxt)
{
if (!test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
if (!blk_queue_cluster(q))
return 0;
if (bio->bi_seg_back_size + nxt->bi_seg_front_size >
......@@ -123,7 +123,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
int nsegs, cluster;
nsegs = 0;
cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
cluster = blk_queue_cluster(q);
/*
* for each bio in rq
......
block/blk-settings.c
浏览文件 @ bb3613aa
......@@ -126,7 +126,7 @@ void blk_set_default_limits(struct queue_limits *lim)
lim->alignment_offset = 0;
lim->io_opt = 0;
lim->misaligned = 0;
lim->no_cluster = 0;
lim->cluster = 1;
}
EXPORT_SYMBOL(blk_set_default_limits);
......@@ -229,8 +229,8 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
* blk_queue_max_hw_sectors - set max sectors for a request for this queue
* @q: the request queue for the device
* blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
* @limits: the queue limits
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
......@@ -244,7 +244,7 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
* per-device basis in /sys/block/<device>/queue/max_sectors_kb.
* The soft limit can not exceed max_hw_sectors.
**/
void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
{
if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
......@@ -252,9 +252,23 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto
__func__, max_hw_sectors);
}
q->limits.max_hw_sectors = max_hw_sectors;
q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
BLK_DEF_MAX_SECTORS);
limits->max_hw_sectors = max_hw_sectors;
limits->max_sectors = min_t(unsigned int, max_hw_sectors,
BLK_DEF_MAX_SECTORS);
}
EXPORT_SYMBOL(blk_limits_max_hw_sectors);
/**
* blk_queue_max_hw_sectors - set max sectors for a request for this queue
* @q: the request queue for the device
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
* See description for blk_limits_max_hw_sectors().
**/
void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
......@@ -464,15 +478,6 @@ EXPORT_SYMBOL(blk_queue_io_opt);
void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
{
blk_stack_limits(&t->limits, &b->limits, 0);
if (!t->queue_lock)
WARN_ON_ONCE(1);
else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
unsigned long flags;
spin_lock_irqsave(t->queue_lock, flags);
queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
spin_unlock_irqrestore(t->queue_lock, flags);
}
}
EXPORT_SYMBOL(blk_queue_stack_limits);
......@@ -545,7 +550,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
t->io_min = max(t->io_min, b->io_min);
t->io_opt = lcm(t->io_opt, b->io_opt);
t->no_cluster |= b->no_cluster;
t->cluster &= b->cluster;
t->discard_zeroes_data &= b->discard_zeroes_data;
/* Physical block size a multiple of the logical block size? */
......@@ -641,7 +646,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset)
{
struct request_queue *t = disk->queue;
struct request_queue *b = bdev_get_queue(bdev);
if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
......@@ -652,17 +656,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
top, bottom);
}
if (!t->queue_lock)
WARN_ON_ONCE(1);
else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
unsigned long flags;
spin_lock_irqsave(t->queue_lock, flags);
if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
spin_unlock_irqrestore(t->queue_lock, flags);
}
}
EXPORT_SYMBOL(disk_stack_limits);
......
block/blk-sysfs.c
浏览文件 @ bb3613aa
......@@ -119,7 +119,7 @@ static ssize_t queue_max_integrity_segments_show(struct request_queue *q, char *
static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
{
if (test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
if (blk_queue_cluster(q))
return queue_var_show(queue_max_segment_size(q), (page));
return queue_var_show(PAGE_CACHE_SIZE, (page));
......
block/blk-throttle.c
浏览文件 @ bb3613aa
......@@ -355,6 +355,12 @@ throtl_start_new_slice(struct throtl_data *td, struct throtl_grp *tg, bool rw)
tg->slice_end[rw], jiffies);
}
static inline void throtl_set_slice_end(struct throtl_data *td,
struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
{
tg->slice_end[rw] = roundup(jiffy_end, throtl_slice);
}
static inline void throtl_extend_slice(struct throtl_data *td,
struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
{
......@@ -391,6 +397,16 @@ throtl_trim_slice(struct throtl_data *td, struct throtl_grp *tg, bool rw)
if (throtl_slice_used(td, tg, rw))
return;
/*
* A bio has been dispatched. Also adjust slice_end. It might happen
* that initially cgroup limit was very low resulting in high
* slice_end, but later limit was bumped up and bio was dispached
* sooner, then we need to reduce slice_end. A high bogus slice_end
* is bad because it does not allow new slice to start.
*/
throtl_set_slice_end(td, tg, rw, jiffies + throtl_slice);
time_elapsed = jiffies - tg->slice_start[rw];
nr_slices = time_elapsed / throtl_slice;
......@@ -709,26 +725,21 @@ static void throtl_process_limit_change(struct throtl_data *td)
struct throtl_grp *tg;
struct hlist_node *pos, *n;
/*
* Make sure atomic_inc() effects from
* throtl_update_blkio_group_read_bps(), group of functions are
* visible.
* Is this required or smp_mb__after_atomic_inc() was suffcient
* after the atomic_inc().
*/
smp_rmb();
if (!atomic_read(&td->limits_changed))
return;
throtl_log(td, "limit changed =%d", atomic_read(&td->limits_changed));
hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
/*
* Do I need an smp_rmb() here to make sure tg->limits_changed
* update is visible. I am relying on smp_rmb() at the
* beginning of function and not putting a new one here.
*/
/*
* Make sure updates from throtl_update_blkio_group_read_bps() group
* of functions to tg->limits_changed are visible. We do not
* want update td->limits_changed to be visible but update to
* tg->limits_changed not being visible yet on this cpu. Hence
* the read barrier.
*/
smp_rmb();
hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
if (throtl_tg_on_rr(tg) && tg->limits_changed) {
throtl_log_tg(td, tg, "limit change rbps=%llu wbps=%llu"
" riops=%u wiops=%u", tg->bps[READ],
......
drivers/block/cciss.c
浏览文件 @ bb3613aa
......@@ -2834,6 +2834,8 @@ static int cciss_revalidate(struct gendisk *disk)
InquiryData_struct *inq_buff = NULL;
for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
if (!h->drv[logvol])
continue;
if (memcmp(h->drv[logvol]->LunID, drv->LunID,
sizeof(drv->LunID)) == 0) {
FOUND = 1;
......
drivers/block/drbd/drbd_receiver.c
浏览文件 @ bb3613aa
......@@ -3627,17 +3627,19 @@ static void drbdd(struct drbd_conf *mdev)
}
shs = drbd_cmd_handler[cmd].pkt_size - sizeof(union p_header);
rv = drbd_recv(mdev, &header->h80.payload, shs);
if (unlikely(rv != shs)) {
dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
goto err_out;
}
if (packet_size - shs > 0 && !drbd_cmd_handler[cmd].expect_payload) {
dev_err(DEV, "No payload expected %s l:%d\n", cmdname(cmd), packet_size);
goto err_out;
}
if (shs) {
rv = drbd_recv(mdev, &header->h80.payload, shs);
if (unlikely(rv != shs)) {
dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
goto err_out;
}
}
rv = drbd_cmd_handler[cmd].function(mdev, cmd, packet_size - shs);
if (unlikely(!rv)) {
......
drivers/block/drbd/drbd_req.h
浏览文件 @ bb3613aa
......@@ -339,7 +339,8 @@ static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
}
/* completion of master bio is outside of spinlock.
* If you need it irqsave, do it your self! */
* If you need it irqsave, do it your self!
* Which means: don't use from bio endio callback. */
static inline int req_mod(struct drbd_request *req,
enum drbd_req_event what)
{
......
drivers/block/drbd/drbd_worker.c
浏览文件 @ bb3613aa
......@@ -193,8 +193,10 @@ void drbd_endio_sec(struct bio *bio, int error)
*/
void drbd_endio_pri(struct bio *bio, int error)
{
unsigned long flags;
struct drbd_request *req = bio->bi_private;
struct drbd_conf *mdev = req->mdev;
struct bio_and_error m;
enum drbd_req_event what;
int uptodate = bio_flagged(bio, BIO_UPTODATE);
......@@ -220,7 +222,13 @@ void drbd_endio_pri(struct bio *bio, int error)
bio_put(req->private_bio);
req->private_bio = ERR_PTR(error);
req_mod(req, what);
/* not req_mod(), we need irqsave here! */
spin_lock_irqsave(&mdev->req_lock, flags);
__req_mod(req, what, &m);
spin_unlock_irqrestore(&mdev->req_lock, flags);
if (m.bio)
complete_master_bio(mdev, &m);
}
int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
......
drivers/clocksource/sh_cmt.c
浏览文件 @ bb3613aa
......@@ -283,16 +283,21 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p,
} while (delay);
}
static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
{
unsigned long flags;
if (delta > p->max_match_value)
dev_warn(&p->pdev->dev, "delta out of range\n");
spin_lock_irqsave(&p->lock, flags);
p->next_match_value = delta;
sh_cmt_clock_event_program_verify(p, 0);
}
static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
{
unsigned long flags;
spin_lock_irqsave(&p->lock, flags);
__sh_cmt_set_next(p, delta);
spin_unlock_irqrestore(&p->lock, flags);
}
......@@ -359,7 +364,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag)
/* setup timeout if no clockevent */
if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
sh_cmt_set_next(p, p->max_match_value);
__sh_cmt_set_next(p, p->max_match_value);
out:
spin_unlock_irqrestore(&p->lock, flags);
......@@ -381,7 +386,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
/* adjust the timeout to maximum if only clocksource left */
if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
sh_cmt_set_next(p, p->max_match_value);
__sh_cmt_set_next(p, p->max_match_value);
spin_unlock_irqrestore(&p->lock, flags);
}
......
drivers/input/evdev.c
浏览文件 @ bb3613aa
......@@ -534,76 +534,73 @@ static int handle_eviocgbit(struct input_dev *dev,
}
#undef OLD_KEY_MAX
static int evdev_handle_get_keycode(struct input_dev *dev,
void __user *p, size_t size)
static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
{
struct input_keymap_entry ke;
struct input_keymap_entry ke = {
.len = sizeof(unsigned int),
.flags = 0,
};
int __user *ip = (int __user *)p;
int error;
memset(&ke, 0, sizeof(ke));
if (size == sizeof(unsigned int[2])) {
/* legacy case */
int __user *ip = (int __user *)p;
/* legacy case */
if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
return -EFAULT;
if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
return -EFAULT;
error = input_get_keycode(dev, &ke);
if (error)
return error;
ke.len = sizeof(unsigned int);
ke.flags = 0;
if (put_user(ke.keycode, ip + 1))
return -EFAULT;
error = input_get_keycode(dev, &ke);
if (error)
return error;
return 0;
}
if (put_user(ke.keycode, ip + 1))
return -EFAULT;
static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p)
{
struct input_keymap_entry ke;
int error;
} else {
size = min(size, sizeof(ke));
if (copy_from_user(&ke, p, sizeof(ke)))
return -EFAULT;
if (copy_from_user(&ke, p, size))
return -EFAULT;
error = input_get_keycode(dev, &ke);
if (error)
return error;
error = input_get_keycode(dev, &ke);
if (error)
return error;
if (copy_to_user(p, &ke, sizeof(ke)))
return -EFAULT;
if (copy_to_user(p, &ke, size))
return -EFAULT;
}
return 0;
}
static int evdev_handle_set_keycode(struct input_dev *dev,
void __user *p, size_t size)
static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p)
{
struct input_keymap_entry ke;
memset(&ke, 0, sizeof(ke));
struct input_keymap_entry ke = {
.len = sizeof(unsigned int),
.flags = 0,
};
int __user *ip = (int __user *)p;
if (size == sizeof(unsigned int[2])) {
/* legacy case */
int __user *ip = (int __user *)p;
if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
return -EFAULT;
if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
return -EFAULT;
if (get_user(ke.keycode, ip + 1))
return -EFAULT;
if (get_user(ke.keycode, ip + 1))
return -EFAULT;
return input_set_keycode(dev, &ke);
}
ke.len = sizeof(unsigned int);
ke.flags = 0;
static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
{
struct input_keymap_entry ke;
} else {
size = min(size, sizeof(ke));
if (copy_from_user(&ke, p, sizeof(ke)))
return -EFAULT;
if (copy_from_user(&ke, p, size))
return -EFAULT;
if (ke.len > sizeof(ke.scancode))
return -EINVAL;
}
if (ke.len > sizeof(ke.scancode))
return -EINVAL;
return input_set_keycode(dev, &ke);
}
......@@ -669,6 +666,18 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
return evdev_grab(evdev, client);
else
return evdev_ungrab(evdev, client);
case EVIOCGKEYCODE:
return evdev_handle_get_keycode(dev, p);
case EVIOCSKEYCODE:
return evdev_handle_set_keycode(dev, p);
case EVIOCGKEYCODE_V2:
return evdev_handle_get_keycode_v2(dev, p);
case EVIOCSKEYCODE_V2:
return evdev_handle_set_keycode_v2(dev, p);
}
size = _IOC_SIZE(cmd);
......@@ -708,12 +717,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
return -EFAULT;
return error;
case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
return evdev_handle_get_keycode(dev, p, size);
case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
return evdev_handle_set_keycode(dev, p, size);
}
/* Multi-number variable-length handlers */
......
drivers/input/tablet/wacom_wac.c
浏览文件 @ bb3613aa
......@@ -1436,6 +1436,8 @@ static struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
static const struct wacom_features wacom_features_0xD4 =
{ "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD8 =
{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xDA =
......@@ -1510,6 +1512,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xD4) },
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
......
drivers/md/dm-table.c
浏览文件 @ bb3613aa
......@@ -517,9 +517,8 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
*/
if (q->merge_bvec_fn && !ti->type->merge)
limits->max_sectors =
min_not_zero(limits->max_sectors,
(unsigned int) (PAGE_SIZE >> 9));
blk_limits_max_hw_sectors(limits,
(unsigned int) (PAGE_SIZE >> 9));
return 0;
}
EXPORT_SYMBOL_GPL(dm_set_device_limits);
......@@ -1131,11 +1130,6 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
*/
q->limits = *limits;
if (limits->no_cluster)
queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
else
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
if (!dm_table_supports_discards(t))
queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
else
......
drivers/md/md.c
浏览文件 @ bb3613aa
......@@ -4295,9 +4295,6 @@ static int md_alloc(dev_t dev, char *name)
goto abort;
mddev->queue->queuedata = mddev;
/* Can be unlocked because the queue is new: no concurrency */
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue);
blk_queue_make_request(mddev->queue, md_make_request);
disk = alloc_disk(1 << shift);
......
drivers/media/common/saa7146_hlp.c
浏览文件 @ bb3613aa
......@@ -558,7 +558,7 @@ static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, e
static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
{
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_format *sfmt = format_by_fourcc(dev, pixelformat);
struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
int b_depth = vv->ov_fmt->depth;
int b_bpl = vv->ov_fb.fmt.bytesperline;
......@@ -702,7 +702,7 @@ static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa71
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_video_dma vdma1;
struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
int width = buf->fmt->width;
int height = buf->fmt->height;
......@@ -827,7 +827,7 @@ static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa71
struct saa7146_video_dma vdma2;
struct saa7146_video_dma vdma3;
struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
int width = buf->fmt->width;
int height = buf->fmt->height;
......@@ -994,7 +994,7 @@ static void program_capture_engine(struct saa7146_dev *dev, int planar)
void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
{
struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_vv *vv = dev->vv_data;
u32 vdma1_prot_addr;
......
drivers/media/common/saa7146_video.c
浏览文件 @ bb3613aa
......@@ -84,7 +84,7 @@ static struct saa7146_format formats[] = {
static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc)
struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
{
int i, j = NUM_FORMATS;
......@@ -266,7 +266,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
struct scatterlist *list = dma->sglist;
int length = dma->sglen;
struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
......@@ -408,7 +408,7 @@ static int video_begin(struct saa7146_fh *fh)
}
}
fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
/* we need to have a valid format set here */
BUG_ON(NULL == fmt);
......@@ -460,7 +460,7 @@ static int video_end(struct saa7146_fh *fh, struct file *file)
return -EBUSY;
}
fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
/* we need to have a valid format set here */
BUG_ON(NULL == fmt);
......@@ -536,7 +536,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f
return -EPERM;
/* check args */
fmt = format_by_fourcc(dev, fb->fmt.pixelformat);
fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
if (NULL == fmt)
return -EINVAL;
......@@ -760,7 +760,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_forma
DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
fmt = format_by_fourcc(dev, f->fmt.pix.pixelformat);
fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
if (NULL == fmt)
return -EINVAL;
......@@ -1264,7 +1264,7 @@ static int buffer_prepare(struct videobuf_queue *q,
buf->fmt = &fh->video_fmt;
buf->vb.field = fh->video_fmt.field;
sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
release_all_pagetables(dev, buf);
if( 0 != IS_PLANAR(sfmt->trans)) {
......@@ -1378,7 +1378,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
fh->video_fmt.pixelformat = V4L2_PIX_FMT_BGR24;
fh->video_fmt.bytesperline = 0;
fh->video_fmt.field = V4L2_FIELD_ANY;
sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
sfmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
videobuf_queue_sg_init(&fh->video_q, &video_qops,
......
drivers/media/radio/radio-aimslab.c
浏览文件 @ bb3613aa
......@@ -361,7 +361,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
static const struct v4l2_file_operations rtrack_fops = {
.owner = THIS_MODULE,
.ioctl = video_ioctl2,
.unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
......@@ -412,13 +412,6 @@ static int __init rtrack_init(void)
rt->vdev.release = video_device_release_empty;
video_set_drvdata(&rt->vdev, rt);
if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&rt->v4l2_dev);
release_region(rt->io, 2);
return -EINVAL;
}
v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
/* Set up the I/O locking */
mutex_init(&rt->lock);
......@@ -430,6 +423,13 @@ static int __init rtrack_init(void)
sleep_delay(2000000); /* make sure it's totally down */
outb(0xc0, rt->io); /* steady volume, mute card */
if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&rt->v4l2_dev);
release_region(rt->io, 2);
return -EINVAL;
}
v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
return 0;
}
......
drivers/media/radio/radio-aztech.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-cadet.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-gemtek.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-maestro.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-rtrack2.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-sf16fmi.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-si4713.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-tea5764.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-timb.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-trust.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-typhoon.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/radio/radio-zoltrix.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/arv.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/bw-qcam.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/c-qcam.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/cafe_ccic.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/gspca/sonixj.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/meye.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/pms.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/sh_vou.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/uvc/uvc_ctrl.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/uvc/uvc_queue.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/uvc/uvc_v4l2.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/uvc/uvc_video.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/uvc/uvcvideo.h
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/v4l2-dev.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/v4l2-device.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/media/video/w9966.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/pci/bus.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/pci/dmar.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/pci/quirks.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/scsi/scsi_lib.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/tty/n_gsm.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/core/Kconfig
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/gadget/composite.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/host/xhci-mem.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/misc/uss720.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/serial/ftdi_sio.c
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/serial/ftdi_sio_ids.h
浏览文件 @ bb3613aa
此差异已折叠。
drivers/usb/storage/unusual_devs.h
浏览文件 @ bb3613aa
此差异已折叠。
drivers/video/omap/Kconfig
浏览文件 @ bb3613aa
此差异已折叠。
drivers/video/omap2/vram.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/btrfs/export.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/ceph/dir.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/ceph/file.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/namei.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/nilfs2/gcinode.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/nilfs2/ioctl.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/notify/fanotify/fanotify.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/notify/fanotify/fanotify_user.c
浏览文件 @ bb3613aa
此差异已折叠。
fs/notify/inotify/inotify_user.c
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/blkdev.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/bootmem.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/ceph/libceph.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/cnt32_to_63.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/fanotify.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/fsnotify.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/fsnotify_backend.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/input.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/ioport.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/perf_event.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/pm_runtime.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/sched.h
浏览文件 @ bb3613aa
此差异已折叠。
include/linux/ssb/ssb_driver_gige.h
浏览文件 @ bb3613aa
此差异已折叠。
include/media/saa7146.h
浏览文件 @ bb3613aa
此差异已折叠。
include/media/v4l2-device.h
浏览文件 @ bb3613aa
此差异已折叠。
kernel/fork.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/perf_event.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/power/swap.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/power/user.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/resource.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/sched.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/timer.c
浏览文件 @ bb3613aa
此差异已折叠。
kernel/trace/trace.c
浏览文件 @ bb3613aa
此差异已折叠。
net/ceph/messenger.c
浏览文件 @ bb3613aa
此差异已折叠。
net/ceph/pagevec.c
浏览文件 @ bb3613aa
此差异已折叠。
scripts/recordmcount.h
浏览文件 @ bb3613aa
此差异已折叠。
scripts/tags.sh
浏览文件 @ bb3613aa
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ bb3613aa
此差异已折叠。
sound/soc/codecs/wm8580.c
浏览文件 @ bb3613aa
此差异已折叠。
sound/soc/codecs/wm8904.c
浏览文件 @ bb3613aa
此差异已折叠。
sound/soc/codecs/wm8955.c
浏览文件 @ bb3613aa
此差异已折叠。
sound/soc/codecs/wm8960.c
浏览文件 @ bb3613aa
此差异已折叠。
sound/soc/soc-dapm.c
浏览文件 @ bb3613aa
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或