提交 bae663bc 编写于 作者: R Robert Richter

oprofile/x86: make AMD IBS hotplug capable

Current IBS code is not hotplug capable. An offline cpu might not be
initialized or deinitialized properly. This patch fixes this by
removing on_each_cpu() functions. The IBS init/deinit code is executed
in the per-cpu functions model->setup_ctrs() and model->cpu_down()
which are also called by hotplug notifiers. model->cpu_down() replaces
model->exit() that became obsolete.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NRobert Richter <robert.richter@amd.com>
上级 3de668ee
......@@ -397,6 +397,8 @@ static void nmi_cpu_shutdown(void *dummy)
apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
apic_write(APIC_LVTERR, v);
nmi_cpu_restore_registers(msrs);
if (model->cpu_down)
model->cpu_down();
}
static void nmi_cpu_up(void *dummy)
......@@ -769,6 +771,4 @@ void op_nmi_exit(void)
{
if (using_nmi)
exit_sysfs();
if (model->exit)
model->exit();
}
......@@ -374,6 +374,15 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
val |= op_x86_get_ctrl(model, &counter_config[virt]);
wrmsrl(msrs->controls[i].addr, val);
}
if (ibs_caps)
setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_NMI, 0);
}
static void op_amd_cpu_shutdown(void)
{
if (ibs_caps)
setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
}
static int op_amd_check_ctrs(struct pt_regs * const regs,
......@@ -436,28 +445,16 @@ static void op_amd_stop(struct op_msrs const * const msrs)
op_amd_stop_ibs();
}
static u8 ibs_eilvt_off;
static inline void apic_init_ibs_nmi_per_cpu(void *arg)
{
ibs_eilvt_off = setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_NMI, 0);
}
static inline void apic_clear_ibs_nmi_per_cpu(void *arg)
{
setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
}
static int init_ibs_nmi(void)
static int __init_ibs_nmi(void)
{
#define IBSCTL_LVTOFFSETVAL (1 << 8)
#define IBSCTL 0x1cc
struct pci_dev *cpu_cfg;
int nodes;
u32 value = 0;
u8 ibs_eilvt_off;
/* per CPU setup */
on_each_cpu(apic_init_ibs_nmi_per_cpu, NULL, 1);
ibs_eilvt_off = setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
nodes = 0;
cpu_cfg = NULL;
......@@ -487,21 +484,15 @@ static int init_ibs_nmi(void)
return 0;
}
/* uninitialize the APIC for the IBS interrupts if needed */
static void clear_ibs_nmi(void)
{
on_each_cpu(apic_clear_ibs_nmi_per_cpu, NULL, 1);
}
/* initialize the APIC for the IBS interrupts if available */
static void ibs_init(void)
static void init_ibs(void)
{
ibs_caps = get_ibs_caps();
if (!ibs_caps)
return;
if (init_ibs_nmi()) {
if (__init_ibs_nmi()) {
ibs_caps = 0;
return;
}
......@@ -510,14 +501,6 @@ static void ibs_init(void)
(unsigned)ibs_caps);
}
static void ibs_exit(void)
{
if (!ibs_caps)
return;
clear_ibs_nmi();
}
static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
static int setup_ibs_files(struct super_block *sb, struct dentry *root)
......@@ -566,17 +549,12 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
static int op_amd_init(struct oprofile_operations *ops)
{
ibs_init();
init_ibs();
create_arch_files = ops->create_files;
ops->create_files = setup_ibs_files;
return 0;
}
static void op_amd_exit(void)
{
ibs_exit();
}
struct op_x86_model_spec op_amd_spec = {
.num_counters = NUM_COUNTERS,
.num_controls = NUM_COUNTERS,
......@@ -584,9 +562,9 @@ struct op_x86_model_spec op_amd_spec = {
.reserved = MSR_AMD_EVENTSEL_RESERVED,
.event_mask = OP_EVENT_MASK,
.init = op_amd_init,
.exit = op_amd_exit,
.fill_in_addresses = &op_amd_fill_in_addresses,
.setup_ctrs = &op_amd_setup_ctrs,
.cpu_down = &op_amd_cpu_shutdown,
.check_ctrs = &op_amd_check_ctrs,
.start = &op_amd_start,
.stop = &op_amd_stop,
......
......@@ -40,10 +40,10 @@ struct op_x86_model_spec {
u64 reserved;
u16 event_mask;
int (*init)(struct oprofile_operations *ops);
void (*exit)(void);
int (*fill_in_addresses)(struct op_msrs * const msrs);
void (*setup_ctrs)(struct op_x86_model_spec const *model,
struct op_msrs const * const msrs);
void (*cpu_down)(void);
int (*check_ctrs)(struct pt_regs * const regs,
struct op_msrs const * const msrs);
void (*start)(struct op_msrs const * const msrs);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册