ARM64: dts: meson-gx: add external PHY interrupt on some platforms

Add the external PHY interrupt on the nanopi-k2, odroid-c2, p200, p230
and q200
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

@@ -168,6 +168,8 @@
 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -157,6 +157,8 @@
 
 		eth_phy0: ethernet-phy@0 {
 			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 			eee-broken-1000t;
 		};
 	};

arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts

@@ -117,6 +117,8 @@
 		eth_phy0: ethernet-phy@3 {
 			/* Micrel KSZ9031 (0x00221620) */
 			reg = <3>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts

@@ -128,6 +128,8 @@
 		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 		max-speed = <1000>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 

arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts

@@ -110,6 +110,8 @@
 		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 		max-speed = <1000>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 	};
 };