提交 b91619c2 编写于 作者: D David Daney 提交者: Greg Kroah-Hartman

staging: octeon-usb: Probe via device tree populated platform device.

Extract clocking parameters from the device tree, and remove now dead
code and types.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 1ea98e4c
......@@ -275,13 +275,6 @@ enum cvmx_usb_pipe_flags {
*/
#define MAX_TRANSFER_PACKETS ((1<<10)-1)
enum {
USB_CLOCK_TYPE_REF_12,
USB_CLOCK_TYPE_REF_24,
USB_CLOCK_TYPE_REF_48,
USB_CLOCK_TYPE_CRYSTAL_12,
};
/**
* Logical transactions may take numerous low level
* transactions, especially when splits are concerned. This
......@@ -471,19 +464,6 @@ struct octeon_hcd {
/* Returns the IO address to push/pop stuff data from the FIFOs */
#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
static int octeon_usb_get_clock_type(void)
{
switch (cvmx_sysinfo_get()->board_type) {
case CVMX_BOARD_TYPE_BBGW_REF:
case CVMX_BOARD_TYPE_LANAI2_A:
case CVMX_BOARD_TYPE_LANAI2_U:
case CVMX_BOARD_TYPE_LANAI2_G:
case CVMX_BOARD_TYPE_UBNT_E100:
return USB_CLOCK_TYPE_CRYSTAL_12;
}
return USB_CLOCK_TYPE_REF_48;
}
/**
* Read a USB 32bit CSR. It performs the necessary address swizzle
* for 32bit CSRs and logs the value in a readable format if
......@@ -582,37 +562,6 @@ static inline int __cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
return 0; /* Data0 */
}
/**
* Return the number of USB ports supported by this Octeon
* chip. If the chip doesn't support USB, or is not supported
* by this API, a zero will be returned. Most Octeon chips
* support one usb port, but some support two ports.
* cvmx_usb_initialize() must be called on independent
* struct cvmx_usb_state.
*
* Returns: Number of port, zero if usb isn't supported
*/
static int cvmx_usb_get_num_ports(void)
{
int arch_ports = 0;
if (OCTEON_IS_MODEL(OCTEON_CN56XX))
arch_ports = 1;
else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
arch_ports = 2;
else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
arch_ports = 1;
else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
arch_ports = 1;
else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
arch_ports = 1;
else
arch_ports = 0;
return arch_ports;
}
/**
* Initialize a USB port for use. This must be called before any
* other access to the Octeon USB port is made. The port starts
......@@ -628,41 +577,16 @@ static int cvmx_usb_get_num_ports(void)
* Returns: 0 or a negative error code.
*/
static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
int usb_port_number)
int usb_port_number,
enum cvmx_usb_initialize_flags flags)
{
union cvmx_usbnx_clk_ctl usbn_clk_ctl;
union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
enum cvmx_usb_initialize_flags flags = 0;
int i;
/* At first allow 0-1 for the usb port number */
if ((usb_port_number < 0) || (usb_port_number > 1))
return -EINVAL;
/* For all chips except 52XX there is only one port */
if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
return -EINVAL;
/* Try to determine clock type automatically */
if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) {
/* Only 12 MHZ crystals are supported */
flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
} else {
flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
switch (octeon_usb_get_clock_type()) {
case USB_CLOCK_TYPE_REF_12:
flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
break;
case USB_CLOCK_TYPE_REF_24:
flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
break;
case USB_CLOCK_TYPE_REF_48:
flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
break;
default:
return -EINVAL;
break;
}
}
memset(usb, 0, sizeof(*usb));
usb->init_flags = flags;
......@@ -3431,7 +3355,6 @@ static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
return 0;
}
static const struct hc_driver octeon_hc_driver = {
.description = "Octeon USB",
.product_desc = "Octeon Host Controller",
......@@ -3448,15 +3371,74 @@ static const struct hc_driver octeon_hc_driver = {
.hub_control = octeon_usb_hub_control,
};
static int octeon_usb_driver_probe(struct device *dev)
static int octeon_usb_probe(struct platform_device *pdev)
{
int status;
int usb_num = to_platform_device(dev)->id;
int irq = platform_get_irq(to_platform_device(dev), 0);
int initialize_flags;
int usb_num;
struct resource *res_mem;
struct device_node *usbn_node;
int irq = platform_get_irq(pdev, 0);
struct device *dev = &pdev->dev;
struct octeon_hcd *priv;
struct usb_hcd *hcd;
unsigned long flags;
u32 clock_rate = 48000000;
bool is_crystal_clock = false;
const char *clock_type;
int i;
if (dev->of_node == NULL) {
dev_err(dev, "Error: empty of_node\n");
return -ENXIO;
}
usbn_node = dev->of_node->parent;
i = of_property_read_u32(usbn_node,
"refclk-frequency", &clock_rate);
if (i) {
dev_err(dev, "No USBN \"refclk-frequency\"\n");
return -ENXIO;
}
switch (clock_rate) {
case 12000000:
initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
break;
case 24000000:
initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
break;
case 48000000:
initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
break;
default:
dev_err(dev, "Illebal USBN \"refclk-frequency\" %u\n", clock_rate);
return -ENXIO;
}
i = of_property_read_string(usbn_node,
"refclk-type", &clock_type);
if (!i && strcmp("crystal", clock_type) == 0)
is_crystal_clock = true;
if (is_crystal_clock)
initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
else
initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem == NULL) {
dev_err(dev, "found no memory resource\n");
return -ENXIO;
}
usb_num = (res_mem->start >> 44) & 1;
if (irq < 0) {
/* Defective device tree, but we know how to fix it. */
irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
irq = irq_create_mapping(NULL, hwirq);
}
/*
* Set the DMA mask to 64bits so we get buffers already translated for
......@@ -3465,6 +3447,26 @@ static int octeon_usb_driver_probe(struct device *dev)
dev->coherent_dma_mask = ~0;
dev->dma_mask = &dev->coherent_dma_mask;
/*
* Only cn52XX and cn56XX have DWC_OTG USB hardware and the
* IOB priority registers. Under heavy network load USB
* hardware can be starved by the IOB causing a crash. Give
* it a priority boost if it has been waiting more than 400
* cycles to avoid this situation.
*
* Testing indicates that a cnt_val of 8192 is not sufficient,
* but no failures are seen with 4096. We choose a value of
* 400 to give a safety factor of 10.
*/
if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
pri_cnt.u64 = 0;
pri_cnt.s.cnt_enb = 1;
pri_cnt.s.cnt_val = 400;
cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
}
hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
if (!hcd) {
dev_dbg(dev, "Failed to allocate memory for HCD\n");
......@@ -3478,7 +3480,7 @@ static int octeon_usb_driver_probe(struct device *dev)
tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
INIT_LIST_HEAD(&priv->dequeue_list);
status = cvmx_usb_initialize(&priv->usb, usb_num);
status = cvmx_usb_initialize(&priv->usb, usb_num, initialize_flags);
if (status) {
dev_dbg(dev, "USB initialization failed with %d\n", status);
kfree(hcd);
......@@ -3492,7 +3494,7 @@ static int octeon_usb_driver_probe(struct device *dev)
cvmx_usb_poll(&priv->usb);
spin_unlock_irqrestore(&priv->lock, flags);
status = usb_add_hcd(hcd, irq, IRQF_SHARED);
status = usb_add_hcd(hcd, irq, 0);
if (status) {
dev_dbg(dev, "USB add HCD failed with %d\n", status);
kfree(hcd);
......@@ -3500,14 +3502,15 @@ static int octeon_usb_driver_probe(struct device *dev)
}
device_wakeup_enable(hcd->self.controller);
dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
return 0;
}
static int octeon_usb_driver_remove(struct device *dev)
static int octeon_usb_remove(struct platform_device *pdev)
{
int status;
struct device *dev = &pdev->dev;
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct octeon_hcd *priv = hcd_to_octeon(hcd);
unsigned long flags;
......@@ -3525,85 +3528,41 @@ static int octeon_usb_driver_remove(struct device *dev)
return 0;
}
static struct device_driver octeon_usb_driver = {
.name = "OcteonUSB",
.bus = &platform_bus_type,
.probe = octeon_usb_driver_probe,
.remove = octeon_usb_driver_remove,
static struct of_device_id octeon_usb_match[] = {
{
.compatible = "cavium,octeon-5750-usbc",
},
{},
};
static struct platform_driver octeon_usb_driver = {
.driver = {
.name = "OcteonUSB",
.owner = THIS_MODULE,
.of_match_table = octeon_usb_match,
},
.probe = octeon_usb_probe,
.remove = octeon_usb_remove,
};
#define MAX_USB_PORTS 10
static struct platform_device *pdev_glob[MAX_USB_PORTS];
static int octeon_usb_registered;
static int __init octeon_usb_module_init(void)
static int __init octeon_usb_driver_init(void)
{
int num_devices = cvmx_usb_get_num_ports();
int device;
if (usb_disabled() || num_devices == 0)
return -ENODEV;
if (driver_register(&octeon_usb_driver))
return -ENOMEM;
octeon_usb_registered = 1;
/*
* Only cn52XX and cn56XX have DWC_OTG USB hardware and the
* IOB priority registers. Under heavy network load USB
* hardware can be starved by the IOB causing a crash. Give
* it a priority boost if it has been waiting more than 400
* cycles to avoid this situation.
*
* Testing indicates that a cnt_val of 8192 is not sufficient,
* but no failures are seen with 4096. We choose a value of
* 400 to give a safety factor of 10.
*/
if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
pri_cnt.u64 = 0;
pri_cnt.s.cnt_enb = 1;
pri_cnt.s.cnt_val = 400;
cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
}
for (device = 0; device < num_devices; device++) {
struct resource irq_resource;
struct platform_device *pdev;
memset(&irq_resource, 0, sizeof(irq_resource));
irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
irq_resource.end = irq_resource.start;
irq_resource.flags = IORESOURCE_IRQ;
pdev = platform_device_register_simple((char *)octeon_usb_driver. name, device, &irq_resource, 1);
if (IS_ERR(pdev)) {
driver_unregister(&octeon_usb_driver);
octeon_usb_registered = 0;
return PTR_ERR(pdev);
}
if (device < MAX_USB_PORTS)
pdev_glob[device] = pdev;
if (usb_disabled())
return 0;
}
return 0;
return platform_driver_register(&octeon_usb_driver);
}
module_init(octeon_usb_driver_init);
static void __exit octeon_usb_module_cleanup(void)
static void __exit octeon_usb_driver_exit(void)
{
int i;
if (usb_disabled())
return;
for (i = 0; i < MAX_USB_PORTS; i++)
if (pdev_glob[i]) {
platform_device_unregister(pdev_glob[i]);
pdev_glob[i] = NULL;
}
if (octeon_usb_registered)
driver_unregister(&octeon_usb_driver);
platform_driver_unregister(&octeon_usb_driver);
}
module_exit(octeon_usb_driver_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
module_init(octeon_usb_module_init);
module_exit(octeon_usb_module_cleanup);
MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册