提交 b7ea95ff 编写于 作者: A Aaron Tian 提交者: Jiri Kosina

HID: multitouch: support PixArt optical touch screen

This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]
Signed-off-by: NAaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 54580365
......@@ -349,6 +349,7 @@ config HID_MULTITOUCH
- Lumio CrystalTouch panels
- MosArt dual-touch panels
- PenMount dual touch panels
- PixArt optical touch screen
- Pixcir dual touch panels
- Quanta panels
- eGalax dual-touch panels, including the Joojoo and Wetab tablets
......
......@@ -1501,6 +1501,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
......
......@@ -577,6 +577,11 @@
#define USB_VENDOR_ID_PI_ENGINEERING 0x05f3
#define USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL 0xff
#define USB_VENDOR_ID_PIXART 0x093a
#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN 0x8001
#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1 0x8002
#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2 0x8003
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
......
......@@ -93,6 +93,7 @@ struct mt_device {
#define MT_CLS_DUAL_INRANGE_CONTACTID 0x0006
#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 0x0007
#define MT_CLS_DUAL_NSMU_CONTACTID 0x0008
#define MT_CLS_INRANGE_CONTACTNUMBER 0x0009
/* vendor specific classes */
#define MT_CLS_3M 0x0101
......@@ -159,6 +160,9 @@ struct mt_class mt_classes[] = {
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
MT_QUIRK_SLOT_IS_CONTACTID,
.maxcontacts = 2 },
{ .name = MT_CLS_INRANGE_CONTACTNUMBER,
.quirks = MT_QUIRK_VALID_IS_INRANGE |
MT_QUIRK_SLOT_IS_CONTACTNUMBER },
/*
* vendor specific classes
......@@ -784,6 +788,17 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
USB_DEVICE_ID_PENMOUNT_PCI) },
/* PixArt optical touch screen */
{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
/* PixCir-based panels */
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
......
......@@ -66,6 +66,9 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册