ar5523: Add new driver

This driver is for the AR5523 chipset from Atheros. It was created
in 2007 by Christoph Hellwig but it was never finished. I found it a
couple of months ago and after some polishing it's working pretty
fine.

The driver was written with the FreeBSD driver (uath) as reference,
which was written with the reverse-engineered windows driver as
reference, hence the feature set is very limited. Station mode
only, no HW crypto offload.
Signed-off-by: NPontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

MAINTAINERS

@@ -7477,6 +7477,12 @@ S:	Maintained
 F:	Documentation/usb/acm.txt
 F:	drivers/usb/class/cdc-acm.*
 
+USB AR5523 WIRELESS DRIVER
+M:	Pontus Fuchs <pontus.fuchs@gmail.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/net/wireless/ath/ar5523/
+
 USB ATTACHED SCSI
 M:	Matthew Wilcox <willy@linux.intel.com>
 M:	Sarah Sharp <sarah.a.sharp@linux.intel.com>

drivers/net/wireless/ath/Kconfig

@@ -26,5 +26,6 @@ source "drivers/net/wireless/ath/ath5k/Kconfig"
 source "drivers/net/wireless/ath/ath9k/Kconfig"
 source "drivers/net/wireless/ath/carl9170/Kconfig"
 source "drivers/net/wireless/ath/ath6kl/Kconfig"
+source "drivers/net/wireless/ath/ar5523/Kconfig"
 
 endif

drivers/net/wireless/ath/Makefile

@@ -2,6 +2,7 @@ obj-$(CONFIG_ATH5K)		+= ath5k/
 obj-$(CONFIG_ATH9K_HW)		+= ath9k/
 obj-$(CONFIG_CARL9170)		+= carl9170/
 obj-$(CONFIG_ATH6KL)		+= ath6kl/
+obj-$(CONFIG_AR5523)		+= ar5523/
 
 obj-$(CONFIG_ATH_COMMON)	+= ath.o
 

drivers/net/wireless/ath/ar5523/Kconfig

+config AR5523
+       tristate "Atheros AR5523 wireless driver support"
+       depends on MAC80211 && USB
+       select FW_LOADER
+       ---help---
+         This module add support for AR5523 based USB dongles such as D-Link
+         DWL-G132, Netgear WPN111 and many more.

drivers/net/wireless/ath/ar5523/Makefile

+obj-$(CONFIG_AR5523)   := ar5523.o

drivers/net/wireless/ath/ar5523/ar5523.h

+/*
+ * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr>
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2007 Christoph Hellwig <hch@lst.de>
+ * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org>
+ * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define AR5523_FLAG_PRE_FIRMWARE	(1 << 0)
+#define AR5523_FLAG_ABG			(1 << 1)
+
+#define AR5523_FIRMWARE_FILE	"ar5523.bin"
+
+#define AR5523_CMD_TX_PIPE	0x01
+#define	AR5523_DATA_TX_PIPE	0x02
+#define	AR5523_CMD_RX_PIPE	0x81
+#define	AR5523_DATA_RX_PIPE	0x82
+
+#define ar5523_cmd_tx_pipe(dev) \
+	usb_sndbulkpipe((dev), AR5523_CMD_TX_PIPE)
+#define ar5523_data_tx_pipe(dev) \
+	usb_sndbulkpipe((dev), AR5523_DATA_TX_PIPE)
+#define ar5523_cmd_rx_pipe(dev) \
+	usb_rcvbulkpipe((dev), AR5523_CMD_RX_PIPE)
+#define ar5523_data_rx_pipe(dev) \
+	usb_rcvbulkpipe((dev), AR5523_DATA_RX_PIPE)
+
+#define	AR5523_DATA_TIMEOUT	10000
+#define	AR5523_CMD_TIMEOUT	1000
+
+#define AR5523_TX_DATA_COUNT		8
+#define AR5523_TX_DATA_RESTART_COUNT	2
+#define AR5523_RX_DATA_COUNT		16
+#define AR5523_RX_DATA_REFILL_COUNT	8
+
+#define AR5523_CMD_ID	1
+#define AR5523_DATA_ID	2
+
+#define AR5523_TX_WD_TIMEOUT	(HZ * 2)
+#define AR5523_FLUSH_TIMEOUT	(HZ * 3)
+
+enum AR5523_flags {
+	AR5523_HW_UP,
+	AR5523_USB_DISCONNECTED,
+	AR5523_CONNECTED
+};
+
+struct ar5523_tx_cmd {
+	struct ar5523		*ar;
+	struct urb		*urb_tx;
+	void			*buf_tx;
+	void			*odata;
+	int			olen;
+	int			flags;
+	int			res;
+	struct completion	done;
+};
+
+/* This struct is placed in tx_info->driver_data. It must not be larger
+ *  than IEEE80211_TX_INFO_DRIVER_DATA_SIZE.
+ */
+struct ar5523_tx_data {
+	struct list_head	list;
+	struct ar5523		*ar;
+	struct sk_buff		*skb;
+	struct urb		*urb;
+};
+
+struct ar5523_rx_data {
+	struct	list_head	list;
+	struct ar5523		*ar;
+	struct urb		*urb;
+	struct sk_buff		*skb;
+};
+
+struct ar5523 {
+	struct usb_device	*dev;
+	struct ieee80211_hw	*hw;
+
+	unsigned long		flags;
+	struct mutex		mutex;
+	struct workqueue_struct *wq;
+
+	struct ar5523_tx_cmd	tx_cmd;
+
+	struct delayed_work	stat_work;
+
+	struct timer_list	tx_wd_timer;
+	struct work_struct	tx_wd_work;
+	struct work_struct	tx_work;
+	struct list_head	tx_queue_pending;
+	struct list_head	tx_queue_submitted;
+	spinlock_t		tx_data_list_lock;
+	wait_queue_head_t	tx_flush_waitq;
+
+	/* Queued + Submitted TX frames */
+	atomic_t		tx_nr_total;
+
+	/* Submitted TX frames */
+	atomic_t		tx_nr_pending;
+
+	void			*rx_cmd_buf;
+	struct urb		*rx_cmd_urb;
+
+	struct ar5523_rx_data	rx_data[AR5523_RX_DATA_COUNT];
+	spinlock_t		rx_data_list_lock;
+	struct list_head	rx_data_free;
+	struct list_head	rx_data_used;
+	atomic_t		rx_data_free_cnt;
+
+	struct work_struct	rx_refill_work;
+
+	int			rxbufsz;
+	u8			serial[16];
+
+	struct ieee80211_channel channels[14];
+	struct ieee80211_rate	rates[12];
+	struct ieee80211_supported_band band;
+	struct ieee80211_vif	*vif;
+};
+
+/* flags for sending firmware commands */
+#define AR5523_CMD_FLAG_READ	(1 << 1)
+#define AR5523_CMD_FLAG_MAGIC	(1 << 2)
+
+#define ar5523_dbg(ar, format, arg...) \
+	dev_dbg(&(ar)->dev->dev, format, ## arg)
+
+/* On USB hot-unplug there can be a lot of URBs in flight and they'll all
+ * fail. Instead of dealing with them in every possible place just surpress
+ * any messages on USB disconnect.
+ */
+#define ar5523_err(ar, format, arg...) \
+do { \
+	if (!test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) { \
+		dev_err(&(ar)->dev->dev, format, ## arg); \
+	} \
+} while (0)
+#define ar5523_info(ar, format, arg...)	\
+	dev_info(&(ar)->dev->dev, format, ## arg)

drivers/net/wireless/ath/ar5523/ar5523_hw.h

+/*
+ * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr>
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2007 Christoph Hellwig <hch@lst.de>
+ * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org>
+ * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* all fields are big endian */
+struct ar5523_fwblock {
+	__be32		flags;
+#define AR5523_WRITE_BLOCK	(1 << 4)
+
+	__be32	len;
+#define AR5523_MAX_FWBLOCK_SIZE	2048
+
+	__be32		total;
+	__be32		remain;
+	__be32		rxtotal;
+	__be32		pad[123];
+} __packed;
+
+#define AR5523_MAX_RXCMDSZ	1024
+#define AR5523_MAX_TXCMDSZ	1024
+
+struct ar5523_cmd_hdr {
+	__be32		len;
+	__be32		code;
+/* NB: these are defined for rev 1.5 firmware; rev 1.6 is different */
+/* messages from Host -> Target */
+#define	WDCMSG_HOST_AVAILABLE		0x01
+#define WDCMSG_BIND			0x02
+#define WDCMSG_TARGET_RESET		0x03
+#define WDCMSG_TARGET_GET_CAPABILITY	0x04
+#define WDCMSG_TARGET_SET_CONFIG	0x05
+#define WDCMSG_TARGET_GET_STATUS	0x06
+#define WDCMSG_TARGET_GET_STATS		0x07
+#define WDCMSG_TARGET_START		0x08
+#define WDCMSG_TARGET_STOP		0x09
+#define WDCMSG_TARGET_ENABLE		0x0a
+#define WDCMSG_TARGET_DISABLE		0x0b
+#define	WDCMSG_CREATE_CONNECTION	0x0c
+#define WDCMSG_UPDATE_CONNECT_ATTR	0x0d
+#define	WDCMSG_DELETE_CONNECT		0x0e
+#define	WDCMSG_SEND			0x0f
+#define WDCMSG_FLUSH			0x10
+/* messages from Target -> Host */
+#define	WDCMSG_STATS_UPDATE		0x11
+#define	WDCMSG_BMISS			0x12
+#define	WDCMSG_DEVICE_AVAIL		0x13
+#define	WDCMSG_SEND_COMPLETE		0x14
+#define	WDCMSG_DATA_AVAIL		0x15
+#define	WDCMSG_SET_PWR_MODE		0x16
+#define	WDCMSG_BMISS_ACK		0x17
+#define	WDCMSG_SET_LED_STEADY		0x18
+#define	WDCMSG_SET_LED_BLINK		0x19
+/* more messages */
+#define	WDCMSG_SETUP_BEACON_DESC	0x1a
+#define	WDCMSG_BEACON_INIT		0x1b
+#define	WDCMSG_RESET_KEY_CACHE		0x1c
+#define	WDCMSG_RESET_KEY_CACHE_ENTRY	0x1d
+#define	WDCMSG_SET_KEY_CACHE_ENTRY	0x1e
+#define	WDCMSG_SET_DECOMP_MASK		0x1f
+#define	WDCMSG_SET_REGULATORY_DOMAIN	0x20
+#define	WDCMSG_SET_LED_STATE		0x21
+#define	WDCMSG_WRITE_ASSOCID		0x22
+#define	WDCMSG_SET_STA_BEACON_TIMERS	0x23
+#define	WDCMSG_GET_TSF			0x24
+#define	WDCMSG_RESET_TSF		0x25
+#define	WDCMSG_SET_ADHOC_MODE		0x26
+#define	WDCMSG_SET_BASIC_RATE		0x27
+#define	WDCMSG_MIB_CONTROL		0x28
+#define	WDCMSG_GET_CHANNEL_DATA		0x29
+#define	WDCMSG_GET_CUR_RSSI		0x2a
+#define	WDCMSG_SET_ANTENNA_SWITCH	0x2b
+#define	WDCMSG_USE_SHORT_SLOT_TIME	0x2f
+#define	WDCMSG_SET_POWER_MODE		0x30
+#define	WDCMSG_SETUP_PSPOLL_DESC	0x31
+#define	WDCMSG_SET_RX_MULTICAST_FILTER	0x32
+#define	WDCMSG_RX_FILTER		0x33
+#define	WDCMSG_PER_CALIBRATION		0x34
+#define	WDCMSG_RESET			0x35
+#define	WDCMSG_DISABLE			0x36
+#define	WDCMSG_PHY_DISABLE		0x37
+#define	WDCMSG_SET_TX_POWER_LIMIT	0x38
+#define	WDCMSG_SET_TX_QUEUE_PARAMS	0x39
+#define	WDCMSG_SETUP_TX_QUEUE		0x3a
+#define	WDCMSG_RELEASE_TX_QUEUE		0x3b
+#define	WDCMSG_SET_DEFAULT_KEY		0x43
+
+	__u32		priv;	/* driver private data,
+				   don't care about endianess */
+	__be32		magic;
+	__be32		reserved2[4];
+};
+
+struct ar5523_cmd_host_available {
+	__be32	sw_ver_major;
+	__be32	sw_ver_minor;
+	__be32	sw_ver_patch;
+	__be32	sw_ver_build;
+} __packed;
+
+#define	ATH_SW_VER_MAJOR	1
+#define	ATH_SW_VER_MINOR	5
+#define	ATH_SW_VER_PATCH	0
+#define	ATH_SW_VER_BUILD	9999
+
+struct ar5523_chunk {
+	u8		seqnum;		/* sequence number for ordering */
+	u8		flags;
+#define	UATH_CFLAGS_FINAL	0x01	/* final chunk of a msg */
+#define	UATH_CFLAGS_RXMSG	0x02	/* chunk contains rx completion */
+#define	UATH_CFLAGS_DEBUG	0x04	/* for debugging */
+	__be16		length;		/* chunk size in bytes */
+	/* chunk data follows */
+} __packed;
+
+/*
+ * Message format for a WDCMSG_DATA_AVAIL message from Target to Host.
+ */
+struct ar5523_rx_desc {
+	__be32	len;		/* msg length including header */
+	__be32	code;		/* WDCMSG_DATA_AVAIL */
+	__be32	gennum;		/* generation number */
+	__be32	status;		/* start of RECEIVE_INFO */
+#define	UATH_STATUS_OK			0
+#define	UATH_STATUS_STOP_IN_PROGRESS	1
+#define	UATH_STATUS_CRC_ERR		2
+#define	UATH_STATUS_PHY_ERR		3
+#define	UATH_STATUS_DECRYPT_CRC_ERR	4
+#define	UATH_STATUS_DECRYPT_MIC_ERR	5
+#define	UATH_STATUS_DECOMP_ERR		6
+#define	UATH_STATUS_KEY_ERR		7
+#define	UATH_STATUS_ERR			8
+	__be32	tstamp_low;	/* low-order 32-bits of rx timestamp */
+	__be32	tstamp_high;	/* high-order 32-bits of rx timestamp */
+	__be32	framelen;	/* frame length */
+	__be32	rate;		/* rx rate code */
+	__be32	antenna;
+	__be32	rssi;
+	__be32	channel;
+	__be32	phyerror;
+	__be32	connix;		/* key table ix for bss traffic */
+	__be32	decrypterror;
+	__be32	keycachemiss;
+	__be32	pad;		/* XXX? */
+} __packed;
+
+struct ar5523_tx_desc {
+	__be32	msglen;
+	__be32	msgid;		/* msg id (supplied by host) */
+	__be32	type;		/* opcode: WDMSG_SEND or WDCMSG_FLUSH */
+	__be32	txqid;		/* tx queue id and flags */
+#define	UATH_TXQID_MASK		0x0f
+#define	UATH_TXQID_MINRATE	0x10	/* use min tx rate */
+#define	UATH_TXQID_FF		0x20	/* content is fast frame */
+	__be32	connid;		/* tx connection id */
+#define UATH_ID_INVALID	0xffffffff	/* for sending prior to connection */
+	__be32	flags;		/* non-zero if response desired */
+#define UATH_TX_NOTIFY	(1 << 24)	/* f/w will send a UATH_NOTIF_TX */
+	__be32	buflen;		/* payload length */
+} __packed;
+
+
+#define AR5523_ID_BSS		2
+#define AR5523_ID_BROADCAST	0xffffffff
+
+/* structure for command UATH_CMD_WRITE_MAC */
+struct ar5523_write_mac {
+	__be32	reg;
+	__be32	len;
+	u8		data[32];
+} __packed;
+
+struct ar5523_cmd_rateset {
+	__u8		length;
+#define AR5523_MAX_NRATES	32
+	__u8		set[AR5523_MAX_NRATES];
+};
+
+struct ar5523_cmd_set_associd {		/* AR5523_WRITE_ASSOCID */
+	__be32	defaultrateix;
+	__be32	associd;
+	__be32	timoffset;
+	__be32	turboprime;
+	__u8	bssid[6];
+} __packed;
+
+/* structure for command WDCMSG_RESET */
+struct ar5523_cmd_reset {
+	__be32	flags;		/* channel flags */
+#define	UATH_CHAN_TURBO	0x0100
+#define	UATH_CHAN_CCK	0x0200
+#define	UATH_CHAN_OFDM	0x0400
+#define	UATH_CHAN_2GHZ	0x1000
+#define	UATH_CHAN_5GHZ	0x2000
+	__be32	freq;		/* channel frequency */
+	__be32	maxrdpower;
+	__be32	cfgctl;
+	__be32	twiceantennareduction;
+	__be32	channelchange;
+	__be32	keeprccontent;
+} __packed;
+
+/* structure for command WDCMSG_SET_BASIC_RATE */
+struct ar5523_cmd_rates {
+	__be32	connid;
+	__be32	keeprccontent;
+	__be32	size;
+	struct ar5523_cmd_rateset rateset;
+} __packed;
+
+enum {
+	WLAN_MODE_NONE = 0,
+	WLAN_MODE_11b,
+	WLAN_MODE_11a,
+	WLAN_MODE_11g,
+	WLAN_MODE_11a_TURBO,
+	WLAN_MODE_11g_TURBO,
+	WLAN_MODE_11a_TURBO_PRIME,
+	WLAN_MODE_11g_TURBO_PRIME,
+	WLAN_MODE_11a_XR,
+	WLAN_MODE_11g_XR,
+};
+
+struct ar5523_cmd_connection_attr {
+	__be32	longpreambleonly;
+	struct ar5523_cmd_rateset	rateset;
+	__be32	wlanmode;
+} __packed;
+
+/* structure for command AR5523_CREATE_CONNECTION */
+struct ar5523_cmd_create_connection {
+	__be32	connid;
+	__be32	bssid;
+	__be32	size;
+	struct ar5523_cmd_connection_attr	connattr;
+} __packed;
+
+struct ar5523_cmd_ledsteady {		/* WDCMSG_SET_LED_STEADY */
+	__be32	lednum;
+#define UATH_LED_LINK		0
+#define UATH_LED_ACTIVITY	1
+	__be32	ledmode;
+#define UATH_LED_OFF	0
+#define UATH_LED_ON	1
+} __packed;
+
+struct ar5523_cmd_ledblink {		/* WDCMSG_SET_LED_BLINK */
+	__be32	lednum;
+	__be32	ledmode;
+	__be32	blinkrate;
+	__be32	slowmode;
+} __packed;
+
+struct ar5523_cmd_ledstate {		/* WDCMSG_SET_LED_STATE */
+	__be32	connected;
+} __packed;
+
+struct ar5523_cmd_txq_attr {
+	__be32	priority;
+	__be32	aifs;
+	__be32	logcwmin;
+	__be32	logcwmax;
+	__be32	bursttime;
+	__be32	mode;
+	__be32	qflags;
+} __packed;
+
+struct ar5523_cmd_txq_setup {		/* WDCMSG_SETUP_TX_QUEUE */
+	__be32	qid;
+	__be32	len;
+	struct ar5523_cmd_txq_attr attr;
+} __packed;
+
+struct ar5523_cmd_rx_filter {		/* WDCMSG_RX_FILTER */
+	__be32	bits;
+#define UATH_FILTER_RX_UCAST		0x00000001
+#define UATH_FILTER_RX_MCAST		0x00000002
+#define UATH_FILTER_RX_BCAST		0x00000004
+#define UATH_FILTER_RX_CONTROL		0x00000008
+#define UATH_FILTER_RX_BEACON		0x00000010	/* beacon frames */
+#define UATH_FILTER_RX_PROM		0x00000020	/* promiscuous mode */
+#define UATH_FILTER_RX_PHY_ERR		0x00000040	/* phy errors */
+#define UATH_FILTER_RX_PHY_RADAR	0x00000080	/* radar phy errors */
+#define UATH_FILTER_RX_XR_POOL		0x00000400	/* XR group polls */
+#define UATH_FILTER_RX_PROBE_REQ	0x00000800
+	__be32	op;
+#define UATH_FILTER_OP_INIT		0x0
+#define UATH_FILTER_OP_SET		0x1
+#define UATH_FILTER_OP_CLEAR		0x2
+#define UATH_FILTER_OP_TEMP		0x3
+#define UATH_FILTER_OP_RESTORE		0x4
+} __packed;
+
+enum {
+	CFG_NONE,			/* Sentinal to indicate "no config" */
+	CFG_REG_DOMAIN,			/* Regulatory Domain */
+	CFG_RATE_CONTROL_ENABLE,
+	CFG_DEF_XMIT_DATA_RATE,		/* NB: if rate control is not enabled */
+	CFG_HW_TX_RETRIES,
+	CFG_SW_TX_RETRIES,
+	CFG_SLOW_CLOCK_ENABLE,
+	CFG_COMP_PROC,
+	CFG_USER_RTS_THRESHOLD,
+	CFG_XR2NORM_RATE_THRESHOLD,
+	CFG_XRMODE_SWITCH_COUNT,
+	CFG_PROTECTION_TYPE,
+	CFG_BURST_SEQ_THRESHOLD,
+	CFG_ABOLT,
+	CFG_IQ_LOG_COUNT_MAX,
+	CFG_MODE_CTS,
+	CFG_WME_ENABLED,
+	CFG_GPRS_CBR_PERIOD,
+	CFG_SERVICE_TYPE,
+	/* MAC Address to use.  Overrides EEPROM */
+	CFG_MAC_ADDR,
+	CFG_DEBUG_EAR,
+	CFG_INIT_REGS,
+	/* An ID for use in error & debug messages */
+	CFG_DEBUG_ID,
+	CFG_COMP_WIN_SZ,
+	CFG_DIVERSITY_CTL,
+	CFG_TP_SCALE,
+	CFG_TPC_HALF_DBM5,
+	CFG_TPC_HALF_DBM2,
+	CFG_OVERRD_TX_POWER,
+	CFG_USE_32KHZ_CLOCK,
+	CFG_GMODE_PROTECTION,
+	CFG_GMODE_PROTECT_RATE_INDEX,
+	CFG_GMODE_NON_ERP_PREAMBLE,
+	CFG_WDC_TRANSPORT_CHUNK_SIZE,
+};
+
+enum {
+	/* Sentinal to indicate "no capability" */
+	CAP_NONE,
+	CAP_ALL,			/* ALL capabilities */
+	CAP_TARGET_VERSION,
+	CAP_TARGET_REVISION,
+	CAP_MAC_VERSION,
+	CAP_MAC_REVISION,
+	CAP_PHY_REVISION,
+	CAP_ANALOG_5GHz_REVISION,
+	CAP_ANALOG_2GHz_REVISION,
+	/* Target supports WDC message debug features */
+	CAP_DEBUG_WDCMSG_SUPPORT,
+
+	CAP_REG_DOMAIN,
+	CAP_COUNTRY_CODE,
+	CAP_REG_CAP_BITS,
+
+	CAP_WIRELESS_MODES,
+	CAP_CHAN_SPREAD_SUPPORT,
+	CAP_SLEEP_AFTER_BEACON_BROKEN,
+	CAP_COMPRESS_SUPPORT,
+	CAP_BURST_SUPPORT,
+	CAP_FAST_FRAMES_SUPPORT,
+	CAP_CHAP_TUNING_SUPPORT,
+	CAP_TURBOG_SUPPORT,
+	CAP_TURBO_PRIME_SUPPORT,
+	CAP_DEVICE_TYPE,
+	CAP_XR_SUPPORT,
+	CAP_WME_SUPPORT,
+	CAP_TOTAL_QUEUES,
+	CAP_CONNECTION_ID_MAX,		/* Should absorb CAP_KEY_CACHE_SIZE */
+
+	CAP_LOW_5GHZ_CHAN,
+	CAP_HIGH_5GHZ_CHAN,
+	CAP_LOW_2GHZ_CHAN,
+	CAP_HIGH_2GHZ_CHAN,
+
+	CAP_MIC_AES_CCM,
+	CAP_MIC_CKIP,
+	CAP_MIC_TKIP,
+	CAP_MIC_TKIP_WME,
+	CAP_CIPHER_AES_CCM,
+	CAP_CIPHER_CKIP,
+	CAP_CIPHER_TKIP,
+
+	CAP_TWICE_ANTENNAGAIN_5G,
+	CAP_TWICE_ANTENNAGAIN_2G,
+};
+
+enum {
+	ST_NONE,                    /* Sentinal to indicate "no status" */
+	ST_ALL,
+	ST_SERVICE_TYPE,
+	ST_WLAN_MODE,
+	ST_FREQ,
+	ST_BAND,
+	ST_LAST_RSSI,
+	ST_PS_FRAMES_DROPPED,
+	ST_CACHED_DEF_ANT,
+	ST_COUNT_OTHER_RX_ANT,
+	ST_USE_FAST_DIVERSITY,
+	ST_MAC_ADDR,
+	ST_RX_GENERATION_NUM,
+	ST_TX_QUEUE_DEPTH,
+	ST_SERIAL_NUMBER,
+	ST_WDC_TRANSPORT_CHUNK_SIZE,
+};
+
+enum {
+	TARGET_DEVICE_AWAKE,
+	TARGET_DEVICE_SLEEP,
+	TARGET_DEVICE_PWRDN,
+	TARGET_DEVICE_PWRSAVE,
+	TARGET_DEVICE_SUSPEND,
+	TARGET_DEVICE_RESUME,
+};
+
+/* this is in net/ieee80211.h, but that conflicts with the mac80211 headers */
+#define IEEE80211_2ADDR_LEN	16
+
+#define AR5523_MIN_RXBUFSZ				\
+	(((sizeof(__be32) + IEEE80211_2ADDR_LEN +	\
+	   sizeof(struct ar5523_rx_desc)) + 3) & ~3)