Merge branch 'u300' into devel

Conflicts:
	arch/arm/Makefile
Updates:
	arch/arm/mach-u300/core.c
	arch/arm/mach-u300/timer.c

arch/arm/Kconfig

@@ -598,6 +598,20 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_U300
+	bool "ST-Ericsson U300 Series"
+	depends on MMU
+	select CPU_ARM926T
+	select ARM_AMBA
+	select ARM_VIC
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_GPIO
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -712,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-u300/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier

arch/arm/Makefile

@@ -154,6 +154,7 @@ machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge

arch/arm/mach-u300/Kconfig

+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+
+comment "ST-Ericsson Mobile Platform Products"
+
+config MACH_U300
+	bool "U300"
+
+comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
+
+choice
+	prompt "U300/U330/U335/U365 system type"
+	default MACH_U300_BS2X
+	---help---
+	You need to select the target system, i.e. the
+	U300/U330/U335/U365 board that you want to compile your kernel
+	for.
+
+config MACH_U300_BS2X
+	bool "S26/S26/B25/B26 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S26/S25 test products. (Also works on
+		B26/B25 big boards.)
+
+config MACH_U300_BS330
+	bool "S330/B330 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S330/B330 test products.
+
+config MACH_U300_BS335
+	bool "S335/B335 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S335/B335 test products.
+
+config MACH_U300_BS365
+	bool "S365/B365 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S365/B365 test products.
+
+endchoice
+
+choice
+	prompt "Memory configuration"
+	default MACH_U300_SINGLE_RAM
+	---help---
+	You have to config the kernel according to the physical memory
+	configuration.
+
+config MACH_U300_SINGLE_RAM
+	bool "Single RAM"
+	help
+		Select this if you want support for Single RAM phones.
+
+config MACH_U300_DUAL_RAM
+	bool "Dual RAM"
+	help
+		Select this if you want support for Dual RAM phones.
+		This is two RAM memorys on different EMIFs.
+endchoice
+
+config U300_DEBUG
+	bool "Debug support for U300"
+	depends on PM
+	help
+		Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SEMI_IS_SHARED
+	bool "The SEMI is used by both the access and application side"
+	depends on MACH_U300
+	help
+		This makes it possible to use the SEMI (Shared External
+		Memory Interface) from both from access and application
+		side.
+
+comment "All the settings below must match the bootloader's settings"
+
+config MACH_U300_ACCESS_MEM_SIZE
+       int "Access CPU memory allocation"
+       range 7 25
+       depends on MACH_U300_SINGLE_RAM
+       default 13
+       help
+		How much memory in MiB that the Access side CPU has allocated
+
+config MACH_U300_2MB_ALIGNMENT_FIX
+       bool "2MiB alignment fix"
+       depends on MACH_U300_SINGLE_RAM
+       default y
+       help
+		If yes and the Access side CPU has allocated an odd size in
+		MiB, this fix gives you one MiB extra that would otherwise be
+		lost due to Linux 2 MiB alignment policy.
+
+endmenu
+
+endif

arch/arm/mach-u300/Makefile

+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y		:= core.o clock.o timer.o gpio.o padmux.o
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+obj-$(CONFIG_ARCH_U300)	          += u300.o
+obj-$(CONFIG_MMC)                 += mmc.o

arch/arm/mach-u300/Makefile.boot

+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+ifdef CONFIG_MACH_U300_SINGLE_RAM
+     zreladdr-y	:= 0x28E08000
+  params_phys-y	:= 0x28E00100
+else
+     zreladdr-y	:= 0x48008000
+  params_phys-y	:= 0x48000100
+endif
+
+# This isn't used.
+#initrd_phys-y	:= 0x29800000

arch/arm/mach-u300/clock.h

+/*
+ * arch/arm/mach-u300/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Adopted to ST-Ericsson U300 platforms by
+ * Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+#include <linux/clk.h>
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	struct device *dev;
+	const char *name;
+	struct clk *parent;
+
+	spinlock_t lock;
+	unsigned long rate;
+	bool reset;
+	__u16 clk_val;
+	__s8 usecount;
+	__u32 res_reg;
+	__u16 res_mask;
+
+	bool hw_ctrld;
+
+	void (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	void (*init) (struct clk *);
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+void u300_clock_primecells(void);
+void u300_unclock_primecells(void);
+void u300_enable_intcon_clock(void);
+void u300_enable_timer_clock(void);
+
+#endif

arch/arm/mach-u300/core.c

+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+	{
+		.virtual	= U300_SLOW_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_AHB_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_FAST_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= 0xffff2000, /* TCM memory */
+		.pfn		= __phys_to_pfn(0xffff2000),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+
+	/*
+	 * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+	 * may have to be moved to 0x00000000 in order to use the ROM.
+	 */
+	/*
+	{
+		.virtual	= U300_BOOTROM_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_ROM,
+	},
+	*/
+};
+
+void __init u300_map_io(void)
+{
+	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+	.dev = {
+		.init_name = "uart0", /* Slow device at 0x3000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART0_BASE,
+		.end   = U300_UART0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+	.dev = {
+		.init_name = "uart1", /* Fast device at 0x7000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART1_BASE,
+		.end   = U300_UART1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+	.dev = {
+		.init_name = "pl172", /* AHB device at 0x4000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_EMIF_CFG_BASE,
+		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022", /* Fast device at 0x6000 offset */
+	},
+	.res = {
+		.start = U300_SPI_BASE,
+		.end   = U300_SPI_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_SPI, NO_IRQ },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+static struct amba_device mmcsd_device = {
+	.dev = {
+		.init_name = "mmci", /* Fast device at 0x1000 offset */
+		.platform_data = NULL, /* Added later */
+	},
+	.res = {
+		.start = U300_MMCSD_BASE,
+		.end   = U300_MMCSD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_device,
+#endif
+	&pl022_device,
+	&pl172_device,
+	&mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+	{
+		.start = U300_GPIO_BASE,
+		.end   = (U300_GPIO_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "gpio0",
+		.start = IRQ_U300_GPIO_PORT0,
+		.end   = IRQ_U300_GPIO_PORT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio1",
+		.start = IRQ_U300_GPIO_PORT1,
+		.end   = IRQ_U300_GPIO_PORT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio2",
+		.start = IRQ_U300_GPIO_PORT2,
+		.end   = IRQ_U300_GPIO_PORT2,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name  = "gpio3",
+		.start = IRQ_U300_GPIO_PORT3,
+		.end   = IRQ_U300_GPIO_PORT3,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio4",
+		.start = IRQ_U300_GPIO_PORT4,
+		.end   = IRQ_U300_GPIO_PORT4,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name  = "gpio5",
+		.start = IRQ_U300_GPIO_PORT5,
+		.end   = IRQ_U300_GPIO_PORT5,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio6",
+		.start = IRQ_U300_GPIO_PORT6,
+		.end   = IRQ_U300_GPIO_PORT6,
+		.flags = IORESOURCE_IRQ,
+	},
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+	{
+		.start = U300_KEYPAD_BASE,
+		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "coh901461-press",
+		.start = IRQ_U300_KEYPAD_KEYBF,
+		.end   = IRQ_U300_KEYPAD_KEYBF,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "coh901461-release",
+		.start = IRQ_U300_KEYPAD_KEYBR,
+		.end   = IRQ_U300_KEYPAD_KEYBR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start = U300_RTC_BASE,
+		.end   = U300_RTC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_RTC,
+		.end   = IRQ_U300_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+	{
+		.start = U300_NAND_IF_PHYS_BASE,
+		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct resource i2c0_resources[] = {
+	{
+		.start = U300_I2C0_BASE,
+		.end   = U300_I2C0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C0,
+		.end   = IRQ_U300_I2C0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c1_resources[] = {
+	{
+		.start = U300_I2C1_BASE,
+		.end   = U300_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C1,
+		.end   = IRQ_U300_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
+static struct resource wdog_resources[] = {
+	{
+		.start = U300_WDOG_BASE,
+		.end   = U300_WDOG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_WDOG,
+		.end   = IRQ_U300_WDOG,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+	{
+		.name  = "AVE3e I/O Area",
+		.start = U300_VIDEOENC_BASE,
+		.end   = U300_VIDEOENC_BASE + SZ_512K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e IRQ0",
+		.start = IRQ_U300_VIDEO_ENC_0,
+		.end   = IRQ_U300_VIDEO_ENC_0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e IRQ1",
+		.start = IRQ_U300_VIDEO_ENC_1,
+		.end   = IRQ_U300_VIDEO_ENC_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e Physmem Area",
+		.start = 0, /* 0 will be remapped to reserved memory */
+		.end   = SZ_1M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/*
+	 * The AVE3e requires two regions of 256MB that it considers
+	 * "invisible". The hardware will not be able to access these
+	 * adresses, so they should never point to system RAM.
+	 */
+	{
+		.name  = "AVE3e Reserved 0",
+		.start = 0xd0000000,
+		.end   = 0xd0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e Reserved 1",
+		.start = 0xe0000000,
+		.end   = 0xe0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device wdog_device = {
+	.name = "wdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(wdog_resources),
+	.resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+	.name = "stddci2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
+	.resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+	.name = "stddci2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
+	.resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+	.name = "u300-gpio",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(gpio_resources),
+	.resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+	.name = "keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+	.name = "rtc0",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_resources),
+	.resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+	.name = "nandif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(fsmc_resources),
+	.resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+	.name = "video_enc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ave_resources),
+	.resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+	&i2c0_device,
+	&i2c1_device,
+	&keypad_device,
+	&rtc_device,
+	&gpio_device,
+	&fsmc_device,
+	&wdog_device,
+	&ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+	u32 mask[2] = {0, 0};
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++)
+		set_bit(i, (unsigned long *) &mask[0]);
+	u300_enable_intcon_clock();
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+	u16 chipid;
+	const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+	{
+		.chipid = 0xb800,
+		.name = "DB3000",
+	},
+	{
+		.chipid = 0xc000,
+		.name = "DB3100",
+	},
+	{
+		.chipid = 0xc800,
+		.name = "DB3150",
+	},
+	{
+		.chipid = 0xd800,
+		.name = "DB3200",
+	},
+	{
+		.chipid = 0xe000,
+		.name = "DB3250",
+	},
+	{
+		.chipid = 0xe800,
+		.name = "DB3210",
+	},
+	{
+		.chipid = 0xf000,
+		.name = "DB3350 P1x",
+	},
+	{
+		.chipid = 0xf100,
+		.name = "DB3350 P2x",
+	},
+	{
+		.chipid = 0x0000, /* List terminator */
+		.name = NULL,
+	}
+};
+
+static void u300_init_check_chip(void)
+{
+
+	u16 val;
+	struct db_chip *chip;
+	const char *chipname;
+	const char unknown[] = "UNKNOWN";
+
+	/* Read out and print chip ID */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+	/* This is in funky bigendian order... */
+	val = (val & 0xFFU) << 8 | (val >> 8);
+	chip = db_chips;
+	chipname = unknown;
+
+	for ( ; chip->chipid; chip++) {
+		if (chip->chipid == (val & 0xFF00U)) {
+			chipname = chip->name;
+			break;
+		}
+	}
+	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+	       "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+	if ((val & 0xFF00U) != 0xc800) {
+		printk(KERN_ERR "Platform configured for BS25/BS26 " \
+		       "with DB3150 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+	if ((val & 0xFF00U) != 0xd800) {
+		printk(KERN_ERR "Platform configured for BS330 " \
+		       "with DB3200 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       " with DB3350 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+	if ((val & 0xFF00U) != 0xe800) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       "with DB3210 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+	unsigned long curr_start = __pa(high_memory);
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+		for (j = 0; j < platform_devs[i]->num_resources; j++) {
+			struct resource *const res =
+			  &platform_devs[i]->resource[j];
+
+			if (IORESOURCE_MEM == res->flags &&
+				     0 == res->start) {
+				res->start  = curr_start;
+				res->end   += curr_start;
+				curr_start += (res->end - res->start + 1);
+
+				printk(KERN_INFO "core.c: Mapping RAM " \
+				       "%#x-%#x to device %s:%s\n",
+					res->start, res->end,
+				       platform_devs[i]->name, res->name);
+			}
+		}
+	}
+}
+
+void __init u300_init_devices(void)
+{
+	int i;
+	u16 val;
+
+	/* Check what platform we run and print some status information */
+	u300_init_check_chip();
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Register the AMBA devices in the AMBA bus abstraction layer */
+	u300_clock_primecells();
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	u300_unclock_primecells();
+
+	u300_assign_physmem();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+	/*
+	 * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+	 * both subsystems are requesting this mode.
+	 * If we not share the Acc SDRAM, this is never the case. Therefore
+	 * enable it here from the App side.
+	 */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+	/*
+	 * This needs to be initialized later: it needs the input framework
+	 * to be initialized first.
+	 */
+	return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);

arch/arm/mach-u300/gpio.c

+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Need access to SYSCON registers for PADmuxing */
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+	const char *name;
+	int irq;
+	int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+	{
+		.name = "gpio0",
+		.number = 0,
+	},
+	{
+		.name = "gpio1",
+		.number = 1,
+	},
+	{
+		.name = "gpio2",
+		.number = 2,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name = "gpio3",
+		.number = 3,
+	},
+	{
+		.name = "gpio4",
+		.number = 4,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name = "gpio5",
+		.number = 5,
+	},
+	{
+		.name = "gpio6",
+		.number = 6,
+	},
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW   0
+#define DEFAULT_OUTPUT_HIGH  1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP  0
+#define ENABLE_PULL_UP  1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN       1
+#define GPIO_OUT      2
+
+struct u300_gpio_configuration_data {
+	unsigned char pin_usage;
+	unsigned char default_output_value;
+	unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 5, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 6, pind 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	}
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		/* These 4 pins doesn't exist on DB3210 */
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	}
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+	int (*callback)(void *);
+	void *data;
+	int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+	if (gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "registered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = func;
+	gpio_pin[gpio].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+	if (!gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "unregistered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = NULL;
+	gpio_pin[gpio].data = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_pin[gpio].users)
+		return -EINVAL;
+	else
+		gpio_pin[gpio].users++;
+
+	gpio_users++;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	gpio_users--;
+	gpio_pin[gpio].users--;
+	if (unlikely(gpio_pin[gpio].users < 0)) {
+		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+			 gpio);
+		gpio_pin[gpio].users = 0;
+	}
+
+	return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+	return readl(virtbase + U300_GPIO_PXPDIR +
+	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		/* set */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val | (1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		/* clear */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val & ~(1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin*/
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/* This is not needed since it sets the bits to zero.*/
+	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/*
+	 * FIXME: configure for push/pull, open drain or open source per pin
+	 * in setup. The current driver will only support push/pull.
+	 */
+	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((gpio & 0x07) << 1));
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	gpio_set_value(gpio, value);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+	u32 val;
+	unsigned long flags;
+	local_irq_save(flags);
+
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val |= (1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	if (edge)
+		val |= (1 << (gpio & 0x07));
+	else
+		val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct u300_gpio_port *port = dev_id;
+	u32 val;
+	int pin;
+
+	/* Read event register */
+	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask with enable register */
+	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask relevant bits */
+	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	/* ACK IRQ (clear event) */
+	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Print message */
+	while (val != 0) {
+		unsigned gpio;
+
+		pin = __ffs(val);
+		/* mask off this pin */
+		val &= ~(1 << pin);
+		gpio = (port->number << 3) + pin;
+
+		if (gpio_pin[gpio].callback)
+			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+		else
+			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+			       gpio);
+	}
+	return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+	int i, j;
+	unsigned long flags;
+	u32 val;
+
+	/* Write default values to all pins */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+
+	/*
+	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * default value on outputs.
+	 */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+			local_irq_save(flags);
+			val = readl(virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			/* Mask out this pin */
+			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+			writel(val, virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			local_irq_restore(flags);
+		}
+	}
+
+	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
+	for (i = 0; i < U300_GPIO_MAX; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+	u32 val;
+	int err = 0;
+	int i;
+	int num_irqs;
+
+	gpiodev = &pdev->dev;
+	memset(gpio_pin, 0, sizeof(gpio_pin));
+
+	/* Get GPIO clock */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(gpiodev, "could not get GPIO clock\n");
+		goto err_no_clk;
+	}
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(gpiodev, "could not enable GPIO clock\n");
+		goto err_no_clk_enable;
+	}
+
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres)
+		goto err_no_resource;
+
+	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+	    == NULL) {
+		err = -ENODEV;
+		goto err_no_ioregion;
+	}
+
+	virtbase = ioremap(memres->start, resource_size(memres));
+	if (!virtbase) {
+		err = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	dev_info(gpiodev, "remapped 0x%08x to %p\n",
+		 memres->start, virtbase);
+
+#ifdef U300_COH901335
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+	/* Turn on the GPIO block */
+	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+	val = readl(virtbase + U300_GPIO_CR);
+	dev_info(gpiodev, "COH901571/3 block version: %d, " \
+	       "number of cores: %d\n",
+	       ((val & 0x0000FE00) >> 9),
+	       ((val & 0x000001FC) >> 2));
+	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+	/* Set up some padmuxing here */
+#ifdef CONFIG_MMC
+	pmx_set_mission_mode_mmc();
+#endif
+#ifdef CONFIG_SPI_PL022
+	pmx_set_mission_mode_spi();
+#endif
+
+	gpio_set_initial_values();
+
+	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+		gpio_ports[num_irqs].irq =
+			platform_get_irq_byname(pdev,
+						gpio_ports[num_irqs].name);
+
+		err = request_irq(gpio_ports[num_irqs].irq,
+				  gpio_irq_handler, IRQF_DISABLED,
+				  gpio_ports[num_irqs].name,
+				  &gpio_ports[num_irqs]);
+		if (err) {
+			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+				gpio_ports[num_irqs].name);
+			goto err_no_irq;
+		}
+		/* Turns off PortX_irq_force */
+		writel(0x0, virtbase + U300_GPIO_PXIFR +
+				 num_irqs * U300_GPIO_PORTX_SPACING);
+	}
+
+	return 0;
+
+ err_no_irq:
+	for (i = 0; i < num_irqs; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+ err_no_ioremap:
+	release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+	clk_disable(clk);
+ err_no_clk_enable:
+	clk_put(clk);
+ err_no_clk:
+	dev_info(gpiodev, "module ERROR:%d\n", err);
+	return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+	int i;
+
+	/* Turn off the GPIO block */
+	writel(0x00000000U, virtbase + U300_GPIO_CR);
+	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+	release_mem_region(memres->start, memres->end - memres->start);
+	clk_disable(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static struct platform_driver gpio_driver = {
+	.driver		= {
+		.name	= "u300-gpio",
+	},
+	.remove		= __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+	return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");

arch/arm/mach-u300/include/mach/clkdev.h

+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif

arch/arm/mach-u300/include/mach/debug-macro.S

+/*
+ *
+ * arch-arm/mach-u300/include/mach/debug-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugging macro include header.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+
+	.macro	addruart,rx
+	/* If we move the adress using MMU, use this. */
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ MMU enabled?
+	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rx, \rx, #0x00003000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>

arch/arm/mach-u300/include/mach/entry-macro.S

+/*
+ *
+ * arch-arm/mach-u300/include/mach/entry-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level IRQ helper macros for ST-Ericsson U300
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #0
+	teq	\irqstat, #0
+	bne	1002f
+1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #32
+	teq	\irqstat, #0
+	beq	1003f
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+	.endm

arch/arm/mach-u300/include/mach/gpio.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/gpio.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_H
+#define __MACH_U300_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+/* Switch type depending on platform/chip variant */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_COH901335
+#endif
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
+#define U300_COH901571_3
+#endif
+
+/* Get base address for regs here */
+#include "u300-regs.h"
+/* IRQ numbers */
+#include "irqs.h"
+
+/*
+ * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
+ * used for anything, and often is. The event/enable etc figures are for
+ * the lowermost pin (pin 0 on each port), shift this left to match your
+ * pin if you're gonna use these values.
+ */
+#ifdef U300_COH901335
+#define U300_GPIO_PORTX_SPACING				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_GPIO_PXPDIR				(0x00)
+#define U300_GPIO_PXPDOR				(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x04)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x08)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x0C)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x10)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x14)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x18)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_GPIO_CR					(0x54)
+#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+/* three ports of 8 bits each = GPIO pins 0..23 */
+#define U300_GPIO_NUM_PORTS 3
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX	(U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+#ifdef U300_COH901571_3
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_GPIO_CR					(0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+#define U300_GPIO_PORTX_SPACING				(0x30)
+/* Port X Pin Data INPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDIR				(0x04)
+/* Port X Pin Data OUTPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDOR				(0x08)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x0C)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x14)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x18)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x1C)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x20)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+#ifdef CONFIG_MACH_U300_BS335
+/* seven ports of 8 bits each = GPIO pins 0..55 */
+#define U300_GPIO_NUM_PORTS 7
+#else
+/* five ports of 8 bits each = GPIO pins 0..39 */
+#define U300_GPIO_NUM_PORTS 5
+#endif
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP		4
+#define U300_GPIO_PIN_CAM_REG_EN	5
+#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_UART_CTS		2
+#define U300_GPIO_PIN_UART_RTS		3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
+#endif
+
+#endif
+
+/* translates a pin number to a port number */
+#define PIN_TO_PORT(val) (val >> 3)
+
+/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_register_callback(unsigned gpio,
+				  int (*func)(void *arg),
+				  void *);
+extern int gpio_unregister_callback(unsigned gpio);
+extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
+extern void disable_irq_on_gpio_pin(unsigned gpio);
+extern void gpio_pullup(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern void gpio_set_value(unsigned gpio, int value);
+
+/* wrappers to sleep-enable the previous two functions */
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	/*
+	 * FIXME: This is no 1-1 mapping at all, it points to the
+	 * whole block of 8 pins.
+	 */
+	return (irq - IRQ_U300_GPIO_PORT0) << 3;
+}
+
+#endif

arch/arm/mach-u300/include/mach/hardware.h

+/*
+ * arch/arm/mach-u300/include/mach/hardware.h
+ */
+#include <asm/sizes.h>
+#include <mach/u300-regs.h>

arch/arm/mach-u300/include/mach/io.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/io.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Dummy IO map for being able to use writew()/readw(),
+ * writel()/readw() and similar accessor functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif

arch/arm/mach-u300/include/mach/irqs.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/irqs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * IRQ channel definitions for the U300 platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_U300_INTCON0_START		0
+#define IRQ_U300_INTCON1_START		32
+/* These are on INTCON0 - 30 lines */
+#define IRQ_U300_IRQ0_EXT		0
+#define IRQ_U300_IRQ1_EXT		1
+#define IRQ_U300_DMA			2
+#define IRQ_U300_VIDEO_ENC_0		3
+#define IRQ_U300_VIDEO_ENC_1		4
+#define IRQ_U300_AAIF_RX		5
+#define IRQ_U300_AAIF_TX		6
+#define IRQ_U300_AAIF_VGPIO		7
+#define IRQ_U300_AAIF_WAKEUP		8
+#define IRQ_U300_PCM_I2S0_FRAME		9
+#define IRQ_U300_PCM_I2S0_FIFO		10
+#define IRQ_U300_PCM_I2S1_FRAME		11
+#define IRQ_U300_PCM_I2S1_FIFO		12
+#define IRQ_U300_XGAM_GAMCON		13
+#define IRQ_U300_XGAM_CDI		14
+#define IRQ_U300_XGAM_CDICON		15
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+/* MMIACC not used on the DB3210 or DB3350 chips */
+#define IRQ_U300_XGAM_MMIACC		16
+#endif
+#define IRQ_U300_XGAM_PDI		17
+#define IRQ_U300_XGAM_PDICON		18
+#define IRQ_U300_XGAM_GAMEACC		19
+#define IRQ_U300_XGAM_MCIDCT		20
+#define IRQ_U300_APEX			21
+#define IRQ_U300_UART0			22
+#define IRQ_U300_SPI			23
+#define IRQ_U300_TIMER_APP_OS		24
+#define IRQ_U300_TIMER_APP_DD		25
+#define IRQ_U300_TIMER_APP_GP1		26
+#define IRQ_U300_TIMER_APP_GP2		27
+#define IRQ_U300_TIMER_OS		28
+#define IRQ_U300_TIMER_MS		29
+#define IRQ_U300_KEYPAD_KEYBF		30
+#define IRQ_U300_KEYPAD_KEYBR		31
+/* These are on INTCON1 - 32 lines */
+#define IRQ_U300_GPIO_PORT0		32
+#define IRQ_U300_GPIO_PORT1		33
+#define IRQ_U300_GPIO_PORT2		34
+
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
+    defined(CONFIG_MACH_U300_BS335)
+/* These are for DB3150, DB3200 and DB3350 */
+#define IRQ_U300_WDOG			35
+#define IRQ_U300_EVHIST			36
+#define IRQ_U300_MSPRO			37
+#define IRQ_U300_MMCSD_MCIINTR0		38
+#define IRQ_U300_MMCSD_MCIINTR1		39
+#define IRQ_U300_I2C0			40
+#define IRQ_U300_I2C1			41
+#define IRQ_U300_RTC			42
+#define IRQ_U300_NFIF			43
+#define IRQ_U300_NFIF2			44
+#endif
+
+/* DB3150 and DB3200 have only 45 IRQs */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_NR_IRQS			45
+#endif
+
+/* The DB3350-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS335
+#define IRQ_U300_ISP_F0			45
+#define IRQ_U300_ISP_F1			46
+#define IRQ_U300_ISP_F2			47
+#define IRQ_U300_ISP_F3			48
+#define IRQ_U300_ISP_F4			49
+#define IRQ_U300_GPIO_PORT3		50
+#define IRQ_U300_SYSCON_PLL_LOCK	51
+#define IRQ_U300_UART1			52
+#define IRQ_U300_GPIO_PORT4		53
+#define IRQ_U300_GPIO_PORT5		54
+#define IRQ_U300_GPIO_PORT6		55
+#define U300_NR_IRQS			56
+#endif
+
+/* The DB3210-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS365
+#define IRQ_U300_GPIO_PORT3		35
+#define IRQ_U300_GPIO_PORT4		36
+#define IRQ_U300_WDOG			37
+#define IRQ_U300_EVHIST			38
+#define IRQ_U300_MSPRO			39
+#define IRQ_U300_MMCSD_MCIINTR0		40
+#define IRQ_U300_MMCSD_MCIINTR1		41
+#define IRQ_U300_I2C0			42
+#define IRQ_U300_I2C1			43
+#define IRQ_U300_RTC			44
+#define IRQ_U300_NFIF			45
+#define IRQ_U300_NFIF2			46
+#define IRQ_U300_SYSCON_PLL_LOCK	47
+#define U300_NR_IRQS			48
+#endif
+
+#define NR_IRQS U300_NR_IRQS
+
+#endif

arch/arm/mach-u300/include/mach/memory.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/memory.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Memory virtual/physical mapping constants.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_MACH_U300_DUAL_RAM
+
+#define PHYS_OFFSET		UL(0x48000000)
+#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+
+#else
+
+#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#else
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#endif
+#define BOOT_PARAMS_OFFSET (0x28000000 + \
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
+#endif
+
+/*
+ * We enable a real big DMA buffer if need be.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+#endif

arch/arm/mach-u300/include/mach/platform.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/platform.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic platform init and mapping functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+void u300_map_io(void);
+void u300_init_irq(void);
+void u300_init_devices(void);
+extern struct sys_timer u300_timer;
+
+#endif

arch/arm/mach-u300/include/mach/system.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/system.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * System shutdown and reset functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
+		/* Disable interrupts */
+		local_irq_disable();
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}

arch/arm/mach-u300/include/mach/timex.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/timex.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform tick rate definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+/* This is for the APP OS GP1 (General Purpose 1) timer */
+#define CLOCK_TICK_RATE		1000000
+
+#endif

arch/arm/mach-u300/include/mach/u300-regs.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+#define U300_NAND_CS0_VIRT_BASE		0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+#define U300_NAND_IF_VIRT_BASE		0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE		0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE			(0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE		(0xc0080000)
+#else
+#define U300_VIDEOENC_BASE		(0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif

arch/arm/mach-u300/include/mach/vmalloc.h

+/*
+ *
+ * arch/arm/mach-u300/include/mach/vmalloc.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Virtual memory allocations
+ * End must be above the I/O registers and on an even 2MiB boundary.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#define VMALLOC_END	0xfe800000