提交 b6f1f0de 编写于 作者: F Franck Bui-Huu 提交者: Ralf Baechle

[MIPS] setup.c: cleanup bootmem_init()

This function although doing simple thing is hard to follow. It's
mainly due to:

    - a lot of #ifdef
    - bad local names
    - redundant tests

So this patch try to address these issues. It also do not use
max_pfn global which is marked as an unused exported symbol.

As a bonus side, it's now really easy to see what part of the
code is for no-numa system.

There's also no point to make this function inline.
Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 b5943182
......@@ -96,6 +96,12 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
int x = boot_mem_map.nr_map;
struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
/* Sanity check */
if (start + size < start) {
printk("Trying to add an invalid memory region, skipped\n");
return;
}
/*
* Try to merge with previous entry if any. This is far less than
* perfect but is sufficient for most real world cases.
......@@ -257,15 +263,16 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en
return 0;
}
#define MAXMEM HIGHMEM_START
#define MAXMEM_PFN PFN_DOWN(MAXMEM)
static inline void bootmem_init(void)
/*
* Initialize the bootmem allocator. It also setup initrd related data
* if needed.
*/
static void __init bootmem_init(void)
{
unsigned long start_pfn;
unsigned long reserved_end = (unsigned long)&_end;
#ifndef CONFIG_SGI_IP27
unsigned long first_usable_pfn;
unsigned long highest = 0;
unsigned long mapstart = -1UL;
unsigned long bootmap_size;
int i;
#endif
......@@ -281,7 +288,7 @@ static inline void bootmem_init(void)
unsigned long tmp;
u32 *initrd_header;
tmp = ((reserved_end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2;
tmp = PAGE_ALIGN(reserved_end) - sizeof(u32) * 2;
if (tmp < reserved_end)
tmp += PAGE_SIZE;
initrd_header = (u32 *)tmp;
......@@ -294,16 +301,15 @@ static inline void bootmem_init(void)
}
#endif /* CONFIG_BLK_DEV_INITRD */
#ifndef CONFIG_SGI_IP27
/*
* Partially used pages are not usable - thus
* we are rounding upwards.
* reserved_end is now a pfn
*/
start_pfn = PFN_UP(CPHYSADDR(reserved_end));
reserved_end = PFN_UP(CPHYSADDR(reserved_end));
#ifndef CONFIG_SGI_IP27
/* Find the highest page frame number we have available. */
max_pfn = 0;
first_usable_pfn = -1UL;
/*
* Find the highest page frame number we have available.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
......@@ -312,56 +318,38 @@ static inline void bootmem_init(void)
start = PFN_UP(boot_mem_map.map[i].addr);
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
+ boot_mem_map.map[i].size);
if (start >= end)
if (end > highest)
highest = end;
if (end <= reserved_end)
continue;
if (end > max_pfn)
max_pfn = end;
if (start < first_usable_pfn) {
if (start > start_pfn) {
first_usable_pfn = start;
} else if (end > start_pfn) {
first_usable_pfn = start_pfn;
}
}
if (start >= mapstart)
continue;
mapstart = max(reserved_end, start);
}
/*
* Determine low and high memory ranges
*/
max_low_pfn = max_pfn;
if (max_low_pfn > MAXMEM_PFN) {
max_low_pfn = MAXMEM_PFN;
#ifndef CONFIG_HIGHMEM
/* Maximum memory usable is what is directly addressable */
printk(KERN_WARNING "Warning only %ldMB will be used.\n",
MAXMEM >> 20);
printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
if (highest > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
highend_pfn = highest;
#endif
highest = PFN_DOWN(HIGHMEM_START);
}
#ifdef CONFIG_HIGHMEM
/*
* Crude, we really should make a better attempt at detecting
* highstart_pfn
* Initialize the boot-time allocator with low memory only.
*/
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > MAXMEM_PFN) {
highstart_pfn = MAXMEM_PFN;
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
(highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));
}
#endif
/* Initialize the boot-time allocator with low memory only. */
bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
bootmap_size = init_bootmem(mapstart, highest);
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long curr_pfn, last_pfn, size;
unsigned long start, end, size;
/*
* Reserve usable memory.
......@@ -369,49 +357,37 @@ static inline void bootmem_init(void)
if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
continue;
/*
* We are rounding up the start address of usable memory:
*/
curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
if (curr_pfn >= max_low_pfn)
continue;
if (curr_pfn < start_pfn)
curr_pfn = start_pfn;
/*
* ... and at the end of the usable range downwards:
*/
last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
start = PFN_UP(boot_mem_map.map[i].addr);
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
if (last_pfn > max_low_pfn)
last_pfn = max_low_pfn;
/*
* Only register lowmem part of lowmem segment with bootmem.
* We are rounding up the start address of usable memory
* and at the end of the usable range downwards.
*/
size = last_pfn - curr_pfn;
if (curr_pfn > PFN_DOWN(HIGHMEM_START))
continue;
if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
if (!size)
if (start >= max_low_pfn)
continue;
if (start < reserved_end)
start = reserved_end;
if (end > max_low_pfn)
end = max_low_pfn;
/*
* ... finally, did all the rounding and playing
* around just make the area go away?
* ... finally, is the area going away?
*/
if (last_pfn <= curr_pfn)
if (end <= start)
continue;
size = end - start;
/* Register lowmem ranges */
free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
memory_present(0, curr_pfn, curr_pfn + size - 1);
free_bootmem(PFN_PHYS(start), size << PAGE_SHIFT);
memory_present(0, start, end);
}
/* Reserve the bootmap memory. */
reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
/*
* Reserve the bootmap memory.
*/
reserve_bootmem(PFN_PHYS(mapstart), bootmap_size);
#endif /* CONFIG_SGI_IP27 */
#ifdef CONFIG_BLK_DEV_INITRD
......@@ -483,6 +459,9 @@ static void __init arch_mem_init(char **cmdline_p)
paging_init();
}
#define MAXMEM HIGHMEM_START
#define MAXMEM_PFN PFN_DOWN(MAXMEM)
static inline void resource_init(void)
{
int i;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册