提交 b6c3f5be 编写于 作者: L Larry Finger 提交者: John W. Linville

b43: Fix throughput regression

Commit c7ab5ef9 entitled "b43: implement
short slot and basic rate handling" reduced the transmit throughput for
my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling
portion is OK, the problem is in the short slot handling.

Prior to this change, the short slot enable/disable routines were never
called. Experimentation showed that the critical part was changing the
value at offset 0x0010 in the shared memory. This is supposed to contain
the 802.11 Slot Time in usec, but if it is changed from its initial value
of zero, performance is destroyed. On the other hand, changing the value
in the MMIO register corresponding to the Interframe Slot Time increased
performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic
improvement of the transmit rate from 5.3 to 19.0 Mb/s.

Other changes in the patch include removal of the magic number for the
MMIO register, and allowing the slot time to be set for any PHY operating
in the 2.4 GHz band. Previously, the routine was executed only for G PHYs.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28]
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 3092ad05
...@@ -115,6 +115,7 @@ ...@@ -115,6 +115,7 @@
#define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ #define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */
#define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */ #define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */
#define B43_MMIO_RNG 0x65A #define B43_MMIO_RNG 0x65A
#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */
#define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ #define B43_MMIO_IFSCTL 0x688 /* Interframe space control */
#define B43_MMIO_IFSCTL_USE_EDCF 0x0004 #define B43_MMIO_IFSCTL_USE_EDCF 0x0004
#define B43_MMIO_POWERUP_DELAY 0x6A8 #define B43_MMIO_POWERUP_DELAY 0x6A8
......
...@@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev) ...@@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev)
static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
{ {
/* slot_time is in usec. */ /* slot_time is in usec. */
if (dev->phy.type != B43_PHYTYPE_G) /* This test used to exit for all but a G PHY. */
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
return; return;
b43_write16(dev, 0x684, 510 + slot_time); b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); /* Shared memory location 0x0010 is the slot time and should be
* set to slot_time; however, this register is initially 0 and changing
* the value adversely affects the transmit rate for BCM4311
* devices. Until this behavior is unterstood, delete this step
*
* b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
*/
} }
static void b43_short_slot_timing_enable(struct b43_wldev *dev) static void b43_short_slot_timing_enable(struct b43_wldev *dev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册