提交 b6ba737d 编写于 作者: T Taku Izumi 提交者: David S. Miller

fjes: ethtool -w and -W support for fjes driver

This patch adds implementation of supporting
ethtool -w and -W for fjes driver.

You can enable and disable firmware debug mode by
using ethtool -W, and also retrieve firmware
activity information by using ethtool -w.

This is useful for debugging.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 82f6aea8
......@@ -235,6 +235,66 @@ static void fjes_get_regs(struct net_device *netdev,
regs_buff[36] = rd32(XSCT_ICTL);
}
static int fjes_set_dump(struct net_device *netdev, struct ethtool_dump *dump)
{
struct fjes_adapter *adapter = netdev_priv(netdev);
struct fjes_hw *hw = &adapter->hw;
int ret = 0;
if (dump->flag) {
if (hw->debug_mode)
return -EPERM;
hw->debug_mode = dump->flag;
/* enable debug mode */
mutex_lock(&hw->hw_info.lock);
ret = fjes_hw_start_debug(hw);
mutex_unlock(&hw->hw_info.lock);
if (ret)
hw->debug_mode = 0;
} else {
if (!hw->debug_mode)
return -EPERM;
/* disable debug mode */
mutex_lock(&hw->hw_info.lock);
ret = fjes_hw_stop_debug(hw);
mutex_unlock(&hw->hw_info.lock);
}
return ret;
}
static int fjes_get_dump_flag(struct net_device *netdev,
struct ethtool_dump *dump)
{
struct fjes_adapter *adapter = netdev_priv(netdev);
struct fjes_hw *hw = &adapter->hw;
dump->len = hw->hw_info.trace_size;
dump->version = 1;
dump->flag = hw->debug_mode;
return 0;
}
static int fjes_get_dump_data(struct net_device *netdev,
struct ethtool_dump *dump, void *buf)
{
struct fjes_adapter *adapter = netdev_priv(netdev);
struct fjes_hw *hw = &adapter->hw;
int ret = 0;
if (hw->hw_info.trace)
memcpy(buf, hw->hw_info.trace, hw->hw_info.trace_size);
else
ret = -EPERM;
return ret;
}
static const struct ethtool_ops fjes_ethtool_ops = {
.get_settings = fjes_get_settings,
.get_drvinfo = fjes_get_drvinfo,
......@@ -243,6 +303,9 @@ static const struct ethtool_ops fjes_ethtool_ops = {
.get_sset_count = fjes_get_sset_count,
.get_regs = fjes_get_regs,
.get_regs_len = fjes_get_regs_len,
.set_dump = fjes_set_dump,
.get_dump_flag = fjes_get_dump_flag,
.get_dump_data = fjes_get_dump_data,
};
void fjes_set_ethtool_ops(struct net_device *netdev)
......
......@@ -343,6 +343,9 @@ int fjes_hw_init(struct fjes_hw *hw)
ret = fjes_hw_setup(hw);
hw->hw_info.trace = vzalloc(FJES_DEBUG_BUFFER_SIZE);
hw->hw_info.trace_size = FJES_DEBUG_BUFFER_SIZE;
return ret;
}
......@@ -351,6 +354,18 @@ void fjes_hw_exit(struct fjes_hw *hw)
int ret;
if (hw->base) {
if (hw->debug_mode) {
/* disable debug mode */
mutex_lock(&hw->hw_info.lock);
fjes_hw_stop_debug(hw);
mutex_unlock(&hw->hw_info.lock);
}
vfree(hw->hw_info.trace);
hw->hw_info.trace = NULL;
hw->hw_info.trace_size = 0;
hw->debug_mode = 0;
ret = fjes_hw_reset(hw);
if (ret)
pr_err("%s: reset error", __func__);
......@@ -1175,3 +1190,125 @@ static void fjes_hw_epstop_task(struct work_struct *work)
}
}
}
int fjes_hw_start_debug(struct fjes_hw *hw)
{
union fjes_device_command_req *req_buf = hw->hw_info.req_buf;
union fjes_device_command_res *res_buf = hw->hw_info.res_buf;
enum fjes_dev_command_response_e ret;
int page_count;
int result = 0;
void *addr;
int i;
if (!hw->hw_info.trace)
return -EPERM;
memset(hw->hw_info.trace, 0, FJES_DEBUG_BUFFER_SIZE);
memset(req_buf, 0, hw->hw_info.req_buf_size);
memset(res_buf, 0, hw->hw_info.res_buf_size);
req_buf->start_trace.length =
FJES_DEV_COMMAND_START_DBG_REQ_LEN(hw->hw_info.trace_size);
req_buf->start_trace.mode = hw->debug_mode;
req_buf->start_trace.buffer_len = hw->hw_info.trace_size;
page_count = hw->hw_info.trace_size / FJES_DEBUG_PAGE_SIZE;
for (i = 0; i < page_count; i++) {
addr = ((u8 *)hw->hw_info.trace) + i * FJES_DEBUG_PAGE_SIZE;
req_buf->start_trace.buffer[i] =
(__le64)(page_to_phys(vmalloc_to_page(addr)) +
offset_in_page(addr));
}
res_buf->start_trace.length = 0;
res_buf->start_trace.code = 0;
trace_fjes_hw_start_debug_req(req_buf);
ret = fjes_hw_issue_request_command(hw, FJES_CMD_REQ_START_DEBUG);
trace_fjes_hw_start_debug(res_buf);
if (res_buf->start_trace.length !=
FJES_DEV_COMMAND_START_DBG_RES_LEN) {
result = -ENOMSG;
trace_fjes_hw_start_debug_err("Invalid res_buf");
} else if (ret == FJES_CMD_STATUS_NORMAL) {
switch (res_buf->start_trace.code) {
case FJES_CMD_REQ_RES_CODE_NORMAL:
result = 0;
break;
default:
result = -EPERM;
break;
}
} else {
switch (ret) {
case FJES_CMD_STATUS_UNKNOWN:
result = -EPERM;
break;
case FJES_CMD_STATUS_TIMEOUT:
trace_fjes_hw_start_debug_err("Busy Timeout");
result = -EBUSY;
break;
case FJES_CMD_STATUS_ERROR_PARAM:
case FJES_CMD_STATUS_ERROR_STATUS:
default:
result = -EPERM;
break;
}
}
return result;
}
int fjes_hw_stop_debug(struct fjes_hw *hw)
{
union fjes_device_command_req *req_buf = hw->hw_info.req_buf;
union fjes_device_command_res *res_buf = hw->hw_info.res_buf;
enum fjes_dev_command_response_e ret;
int result = 0;
if (!hw->hw_info.trace)
return -EPERM;
memset(req_buf, 0, hw->hw_info.req_buf_size);
memset(res_buf, 0, hw->hw_info.res_buf_size);
req_buf->stop_trace.length = FJES_DEV_COMMAND_STOP_DBG_REQ_LEN;
res_buf->stop_trace.length = 0;
res_buf->stop_trace.code = 0;
ret = fjes_hw_issue_request_command(hw, FJES_CMD_REQ_STOP_DEBUG);
trace_fjes_hw_stop_debug(res_buf);
if (res_buf->stop_trace.length != FJES_DEV_COMMAND_STOP_DBG_RES_LEN) {
trace_fjes_hw_stop_debug_err("Invalid res_buf");
result = -ENOMSG;
} else if (ret == FJES_CMD_STATUS_NORMAL) {
switch (res_buf->stop_trace.code) {
case FJES_CMD_REQ_RES_CODE_NORMAL:
result = 0;
hw->debug_mode = 0;
break;
default:
result = -EPERM;
break;
}
} else {
switch (ret) {
case FJES_CMD_STATUS_UNKNOWN:
result = -EPERM;
break;
case FJES_CMD_STATUS_TIMEOUT:
result = -EBUSY;
trace_fjes_hw_stop_debug_err("Busy Timeout");
break;
case FJES_CMD_STATUS_ERROR_PARAM:
case FJES_CMD_STATUS_ERROR_STATUS:
default:
result = -EPERM;
break;
}
}
return result;
}
......@@ -33,6 +33,9 @@ struct fjes_hw;
#define EP_BUFFER_SUPPORT_VLAN_MAX 4
#define EP_BUFFER_INFO_SIZE 4096
#define FJES_DEBUG_PAGE_SIZE 4096
#define FJES_DEBUG_BUFFER_SIZE (16 * FJES_DEBUG_PAGE_SIZE)
#define FJES_DEVICE_RESET_TIMEOUT ((17 + 1) * 3 * 8) /* sec */
#define FJES_COMMAND_REQ_TIMEOUT ((5 + 1) * 3 * 8) /* sec */
#define FJES_COMMAND_REQ_BUFF_TIMEOUT (60 * 3) /* sec */
......@@ -94,6 +97,12 @@ struct fjes_hw;
#define FJES_DEV_RES_BUF_SIZE(maxep) \
FJES_DEV_COMMAND_INFO_RES_LEN(maxep)
#define FJES_DEV_COMMAND_START_DBG_REQ_LEN(byte) \
(16 + (8 * (byte) / FJES_DEBUG_PAGE_SIZE))
#define FJES_DEV_COMMAND_START_DBG_RES_LEN (8)
#define FJES_DEV_COMMAND_STOP_DBG_REQ_LEN (4)
#define FJES_DEV_COMMAND_STOP_DBG_RES_LEN (8)
/* Frame & MTU */
struct esmem_frame {
__le32 frame_size;
......@@ -173,6 +182,8 @@ enum fjes_dev_command_request_type {
FJES_CMD_REQ_INFO = 0x0001,
FJES_CMD_REQ_SHARE_BUFFER = 0x0002,
FJES_CMD_REQ_UNSHARE_BUFFER = 0x0004,
FJES_CMD_REQ_START_DEBUG = 0x0100,
FJES_CMD_REQ_STOP_DEBUG = 0x0200,
};
/* parameter for command control */
......@@ -321,6 +332,8 @@ struct fjes_hw {
struct fjes_hw_info hw_info;
spinlock_t rx_status_lock; /* spinlock for rx_status */
u32 debug_mode;
};
int fjes_hw_init(struct fjes_hw *);
......@@ -353,4 +366,6 @@ void *fjes_hw_epbuf_rx_curpkt_get_addr(struct epbuf_handler *, size_t *);
void fjes_hw_epbuf_rx_curpkt_drop(struct epbuf_handler *);
int fjes_hw_epbuf_tx_pkt_send(struct epbuf_handler *, void *, size_t);
int fjes_hw_start_debug(struct fjes_hw *);
int fjes_hw_stop_debug(struct fjes_hw *);
#endif /* FJES_HW_H_ */
......@@ -209,6 +209,75 @@ TRACE_EVENT(fjes_hw_unregister_buff_addr_err,
TP_printk("%s", __get_str(err))
);
TRACE_EVENT(fjes_hw_start_debug_req,
TP_PROTO(union fjes_device_command_req *req_buf),
TP_ARGS(req_buf),
TP_STRUCT__entry(
__field(int, length)
__field(int, mode)
__field(phys_addr_t, buffer)
),
TP_fast_assign(
__entry->length = req_buf->start_trace.length;
__entry->mode = req_buf->start_trace.mode;
__entry->buffer = req_buf->start_trace.buffer[0];
),
TP_printk("req_buf=[length=%d, mode=%d, buffer=%p]",
__entry->length, __entry->mode, (void *)__entry->buffer)
);
TRACE_EVENT(fjes_hw_start_debug,
TP_PROTO(union fjes_device_command_res *res_buf),
TP_ARGS(res_buf),
TP_STRUCT__entry(
__field(int, length)
__field(int, code)
),
TP_fast_assign(
__entry->length = res_buf->start_trace.length;
__entry->code = res_buf->start_trace.code;
),
TP_printk("res_buf=[length=%d, code=%d]", __entry->length, __entry->code)
);
TRACE_EVENT(fjes_hw_start_debug_err,
TP_PROTO(char *err),
TP_ARGS(err),
TP_STRUCT__entry(
__string(err, err)
),
TP_fast_assign(
__assign_str(err, err)
),
TP_printk("%s", __get_str(err))
);
TRACE_EVENT(fjes_hw_stop_debug,
TP_PROTO(union fjes_device_command_res *res_buf),
TP_ARGS(res_buf),
TP_STRUCT__entry(
__field(int, length)
__field(int, code)
),
TP_fast_assign(
__entry->length = res_buf->stop_trace.length;
__entry->code = res_buf->stop_trace.code;
),
TP_printk("res_buf=[length=%d, code=%d]", __entry->length, __entry->code)
);
TRACE_EVENT(fjes_hw_stop_debug_err,
TP_PROTO(char *err),
TP_ARGS(err),
TP_STRUCT__entry(
__string(err, err)
),
TP_fast_assign(
__assign_str(err, err)
),
TP_printk("%s", __get_str(err))
);
/* tracepoints for fjes_main.c */
TRACE_EVENT(fjes_txrx_stop_req_irq_pre,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册