提交 b64b0e8f 编写于 作者: A Andrew Vasquez 提交者: James Bottomley

[SCSI] qla2xxx: Pass in optional extended-initialization control block.

Recent ISPs use this data to configure FCF information.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
上级 dda772e8
......@@ -2440,6 +2440,8 @@ struct qla_hw_data {
dma_addr_t init_cb_dma;
init_cb_t *init_cb;
int init_cb_size;
dma_addr_t ex_init_cb_dma;
struct ex_init_cb_81xx *ex_init_cb;
/* These are used by mailbox operations. */
volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT];
......
......@@ -1440,7 +1440,17 @@ struct nvram_81xx {
uint16_t reserved_6[24];
/* Offset 128. */
uint16_t reserved_7[64];
uint16_t ex_version;
uint8_t prio_fcf_matching_flags;
uint8_t reserved_6_1[3];
uint16_t pri_fcf_vlan_id;
uint8_t pri_fcf_fabric_name[8];
uint16_t reserved_6_2[7];
uint8_t spma_mac_addr[6];
uint16_t reserved_6_3[14];
/* Offset 192. */
uint16_t reserved_7[32];
/*
* BIT 0 = Enable spinup delay
......@@ -1664,6 +1674,17 @@ struct mid_init_cb_81xx {
struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
};
struct ex_init_cb_81xx {
uint16_t ex_version;
uint8_t prio_fcf_matching_flags;
uint8_t reserved_1[3];
uint16_t pri_fcf_vlan_id;
uint8_t pri_fcf_fabric_name[8];
uint16_t reserved_2[7];
uint8_t spma_mac_addr[6];
uint16_t reserved_3[14];
};
#define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000
#define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000
......
......@@ -4455,6 +4455,9 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
}
/* Use extended-initialization control block. */
memcpy(ha->ex_init_cb, &nv->ex_version, sizeof(*ha->ex_init_cb));
/*
* Setup driver NVRAM options.
*/
......
......@@ -1043,14 +1043,22 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size)
else
mcp->mb[0] = MBC_INITIALIZE_FIRMWARE;
mcp->mb[1] = 0;
mcp->mb[2] = MSW(ha->init_cb_dma);
mcp->mb[3] = LSW(ha->init_cb_dma);
mcp->mb[4] = 0;
mcp->mb[5] = 0;
mcp->mb[6] = MSW(MSD(ha->init_cb_dma));
mcp->mb[7] = LSW(MSD(ha->init_cb_dma));
mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
mcp->in_mb = MBX_5|MBX_4|MBX_0;
mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
if (IS_QLA81XX(ha) && ha->ex_init_cb->ex_version) {
mcp->mb[1] = BIT_0;
mcp->mb[10] = MSW(ha->ex_init_cb_dma);
mcp->mb[11] = LSW(ha->ex_init_cb_dma);
mcp->mb[12] = MSW(MSD(ha->ex_init_cb_dma));
mcp->mb[13] = LSW(MSD(ha->ex_init_cb_dma));
mcp->mb[14] = sizeof(*ha->ex_init_cb);
mcp->out_mb |= MBX_14|MBX_13|MBX_12|MBX_11|MBX_10;
}
mcp->in_mb = MBX_0;
mcp->buf_size = size;
mcp->flags = MBX_DMA_OUT;
mcp->tov = MBX_TOV_SECONDS;
......
......@@ -2203,9 +2203,19 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
} else
ha->npiv_info = NULL;
/* Get consistent memory allocated for EX-INIT-CB. */
if (IS_QLA81XX(ha)) {
ha->ex_init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->ex_init_cb_dma);
if (!ha->ex_init_cb)
goto fail_ex_init_cb;
}
INIT_LIST_HEAD(&ha->vp_list);
return 1;
fail_ex_init_cb:
kfree(ha->npiv_info);
fail_npiv_info:
dma_free_coherent(&ha->pdev->dev, ((*rsp)->length + 1) *
sizeof(response_t), (*rsp)->ring, (*rsp)->dma);
......@@ -2291,15 +2301,16 @@ qla2x00_mem_free(struct qla_hw_data *ha)
if (ha->ms_iocb)
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
if (ha->ex_init_cb)
dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma);
if (ha->s_dma_pool)
dma_pool_destroy(ha->s_dma_pool);
if (ha->gid_list)
dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
ha->gid_list_dma);
if (ha->init_cb)
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
ha->init_cb, ha->init_cb_dma);
......@@ -2318,6 +2329,8 @@ qla2x00_mem_free(struct qla_hw_data *ha)
ha->ms_iocb_dma = 0;
ha->init_cb = NULL;
ha->init_cb_dma = 0;
ha->ex_init_cb = NULL;
ha->ex_init_cb_dma = 0;
ha->s_dma_pool = NULL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册