提交 b646cf29 编写于 作者: P Philippe Reynes 提交者: David S. Miller

net: 3c509: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e19b7883
......@@ -1040,67 +1040,68 @@ el3_link_ok(struct net_device *dev)
}
static int
el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_link_ksettings *cmd)
{
u16 tmp;
int ioaddr = dev->base_addr;
u32 supported;
EL3WINDOW(0);
/* obtain current transceiver via WN4_MEDIA? */
tmp = inw(ioaddr + WN0_ADDR_CONF);
ecmd->transceiver = XCVR_INTERNAL;
switch (tmp >> 14) {
case 0:
ecmd->port = PORT_TP;
cmd->base.port = PORT_TP;
break;
case 1:
ecmd->port = PORT_AUI;
ecmd->transceiver = XCVR_EXTERNAL;
cmd->base.port = PORT_AUI;
break;
case 3:
ecmd->port = PORT_BNC;
cmd->base.port = PORT_BNC;
default:
break;
}
ecmd->duplex = DUPLEX_HALF;
ecmd->supported = 0;
cmd->base.duplex = DUPLEX_HALF;
supported = 0;
tmp = inw(ioaddr + WN0_CONF_CTRL);
if (tmp & (1<<13))
ecmd->supported |= SUPPORTED_AUI;
supported |= SUPPORTED_AUI;
if (tmp & (1<<12))
ecmd->supported |= SUPPORTED_BNC;
supported |= SUPPORTED_BNC;
if (tmp & (1<<9)) {
ecmd->supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half |
supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full; /* hmm... */
EL3WINDOW(4);
tmp = inw(ioaddr + WN4_NETDIAG);
if (tmp & FD_ENABLE)
ecmd->duplex = DUPLEX_FULL;
cmd->base.duplex = DUPLEX_FULL;
}
ethtool_cmd_speed_set(ecmd, SPEED_10);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
cmd->base.speed = SPEED_10;
EL3WINDOW(1);
return 0;
}
static int
el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
el3_netdev_set_ecmd(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
u16 tmp;
int ioaddr = dev->base_addr;
if (ecmd->speed != SPEED_10)
if (cmd->base.speed != SPEED_10)
return -EINVAL;
if ((ecmd->duplex != DUPLEX_HALF) && (ecmd->duplex != DUPLEX_FULL))
return -EINVAL;
if ((ecmd->transceiver != XCVR_INTERNAL) && (ecmd->transceiver != XCVR_EXTERNAL))
if ((cmd->base.duplex != DUPLEX_HALF) &&
(cmd->base.duplex != DUPLEX_FULL))
return -EINVAL;
/* change XCVR type */
EL3WINDOW(0);
tmp = inw(ioaddr + WN0_ADDR_CONF);
switch (ecmd->port) {
switch (cmd->base.port) {
case PORT_TP:
tmp &= ~(3<<14);
dev->if_port = 0;
......@@ -1130,7 +1131,7 @@ el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
EL3WINDOW(4);
tmp = inw(ioaddr + WN4_NETDIAG);
if (ecmd->duplex == DUPLEX_FULL)
if (cmd->base.duplex == DUPLEX_FULL)
tmp |= FD_ENABLE;
else
tmp &= ~FD_ENABLE;
......@@ -1146,24 +1147,26 @@ static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
}
static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
static int el3_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct el3_private *lp = netdev_priv(dev);
int ret;
spin_lock_irq(&lp->lock);
ret = el3_netdev_get_ecmd(dev, ecmd);
ret = el3_netdev_get_ecmd(dev, cmd);
spin_unlock_irq(&lp->lock);
return ret;
}
static int el3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
static int el3_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct el3_private *lp = netdev_priv(dev);
int ret;
spin_lock_irq(&lp->lock);
ret = el3_netdev_set_ecmd(dev, ecmd);
ret = el3_netdev_set_ecmd(dev, cmd);
spin_unlock_irq(&lp->lock);
return ret;
}
......@@ -1191,11 +1194,11 @@ static void el3_set_msglevel(struct net_device *dev, u32 v)
static const struct ethtool_ops ethtool_ops = {
.get_drvinfo = el3_get_drvinfo,
.get_settings = el3_get_settings,
.set_settings = el3_set_settings,
.get_link = el3_get_link,
.get_msglevel = el3_get_msglevel,
.set_msglevel = el3_set_msglevel,
.get_link_ksettings = el3_get_link_ksettings,
.set_link_ksettings = el3_set_link_ksettings,
};
static void
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册