提交 b5a0c86a 编写于 作者: O Oleksij Rempel 提交者: John W. Linville

ath9k & ath9k_htc: move ath_rx_stats to cmn

and use it. This move need changes in both drivers.
Signed-off-by: NOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 9d83cd5c
......@@ -86,3 +86,36 @@ void ath9k_cmn_debug_base_eeprom(struct dentry *debugfs_phy,
&fops_base_eeprom);
}
EXPORT_SYMBOL(ath9k_cmn_debug_base_eeprom);
void ath9k_cmn_debug_stat_rx(struct ath_rx_stats *rxstats,
struct ath_rx_status *rs)
{
#define RX_PHY_ERR_INC(c) rxstats->phy_err_stats[c]++
#define RX_CMN_STAT_INC(c) (rxstats->c++)
RX_CMN_STAT_INC(rx_pkts_all);
rxstats->rx_bytes_all += rs->rs_datalen;
if (rs->rs_status & ATH9K_RXERR_CRC)
RX_CMN_STAT_INC(crc_err);
if (rs->rs_status & ATH9K_RXERR_DECRYPT)
RX_CMN_STAT_INC(decrypt_crc_err);
if (rs->rs_status & ATH9K_RXERR_MIC)
RX_CMN_STAT_INC(mic_err);
if (rs->rs_status & ATH9K_RX_DELIM_CRC_PRE)
RX_CMN_STAT_INC(pre_delim_crc_err);
if (rs->rs_status & ATH9K_RX_DELIM_CRC_POST)
RX_CMN_STAT_INC(post_delim_crc_err);
if (rs->rs_status & ATH9K_RX_DECRYPT_BUSY)
RX_CMN_STAT_INC(decrypt_busy_err);
if (rs->rs_status & ATH9K_RXERR_PHY) {
RX_CMN_STAT_INC(phy_err);
if (rs->rs_phyerr < ATH9K_PHYERR_MAX)
RX_PHY_ERR_INC(rs->rs_phyerr);
}
#undef RX_CMN_STAT_INC
#undef RX_PHY_ERR_INC
}
EXPORT_SYMBOL(ath9k_cmn_debug_stat_rx);
......@@ -14,7 +14,55 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/**
* struct ath_rx_stats - RX Statistics
* @rx_pkts_all: No. of total frames received, including ones that
may have had errors.
* @rx_bytes_all: No. of total bytes received, including ones that
may have had errors.
* @crc_err: No. of frames with incorrect CRC value
* @decrypt_crc_err: No. of frames whose CRC check failed after
decryption process completed
* @phy_err: No. of frames whose reception failed because the PHY
encountered an error
* @mic_err: No. of frames with incorrect TKIP MIC verification failure
* @pre_delim_crc_err: Pre-Frame delimiter CRC error detections
* @post_delim_crc_err: Post-Frame delimiter CRC error detections
* @decrypt_busy_err: Decryption interruptions counter
* @phy_err_stats: Individual PHY error statistics
* @rx_len_err: No. of frames discarded due to bad length.
* @rx_oom_err: No. of frames dropped due to OOM issues.
* @rx_rate_err: No. of frames dropped due to rate errors.
* @rx_too_many_frags_err: Frames dropped due to too-many-frags received.
* @rx_beacons: No. of beacons received.
* @rx_frags: No. of rx-fragements received.
* @rx_spectral: No of spectral packets received.
*/
struct ath_rx_stats {
u32 rx_pkts_all;
u32 rx_bytes_all;
u32 crc_err;
u32 decrypt_crc_err;
u32 phy_err;
u32 mic_err;
u32 pre_delim_crc_err;
u32 post_delim_crc_err;
u32 decrypt_busy_err;
u32 phy_err_stats[ATH9K_PHYERR_MAX];
u32 rx_len_err;
u32 rx_oom_err;
u32 rx_rate_err;
u32 rx_too_many_frags_err;
u32 rx_beacons;
u32 rx_frags;
u32 rx_spectral;
};
void ath9k_cmn_debug_modal_eeprom(struct dentry *debugfs_phy,
struct ath_hw *ah);
void ath9k_cmn_debug_base_eeprom(struct dentry *debugfs_phy,
struct ath_hw *ah);
void ath9k_cmn_debug_stat_rx(struct ath_rx_stats *rxstats,
struct ath_rx_status *rs);
......@@ -998,31 +998,7 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf,
void ath_debug_stat_rx(struct ath_softc *sc, struct ath_rx_status *rs)
{
#define RX_PHY_ERR_INC(c) sc->debug.stats.rxstats.phy_err_stats[c]++
RX_STAT_INC(rx_pkts_all);
sc->debug.stats.rxstats.rx_bytes_all += rs->rs_datalen;
if (rs->rs_status & ATH9K_RXERR_CRC)
RX_STAT_INC(crc_err);
if (rs->rs_status & ATH9K_RXERR_DECRYPT)
RX_STAT_INC(decrypt_crc_err);
if (rs->rs_status & ATH9K_RXERR_MIC)
RX_STAT_INC(mic_err);
if (rs->rs_status & ATH9K_RX_DELIM_CRC_PRE)
RX_STAT_INC(pre_delim_crc_err);
if (rs->rs_status & ATH9K_RX_DELIM_CRC_POST)
RX_STAT_INC(post_delim_crc_err);
if (rs->rs_status & ATH9K_RX_DECRYPT_BUSY)
RX_STAT_INC(decrypt_busy_err);
if (rs->rs_status & ATH9K_RXERR_PHY) {
RX_STAT_INC(phy_err);
if (rs->rs_phyerr < ATH9K_PHYERR_MAX)
RX_PHY_ERR_INC(rs->rs_phyerr);
}
#undef RX_PHY_ERR_INC
ath9k_cmn_debug_stat_rx(&sc->debug.stats.rxstats, rs);
}
static const struct file_operations fops_recv = {
......
......@@ -221,50 +221,6 @@ struct ath_rx_rate_stats {
} cck_stats[4];
};
/**
* struct ath_rx_stats - RX Statistics
* @rx_pkts_all: No. of total frames received, including ones that
may have had errors.
* @rx_bytes_all: No. of total bytes received, including ones that
may have had errors.
* @crc_err: No. of frames with incorrect CRC value
* @decrypt_crc_err: No. of frames whose CRC check failed after
decryption process completed
* @phy_err: No. of frames whose reception failed because the PHY
encountered an error
* @mic_err: No. of frames with incorrect TKIP MIC verification failure
* @pre_delim_crc_err: Pre-Frame delimiter CRC error detections
* @post_delim_crc_err: Post-Frame delimiter CRC error detections
* @decrypt_busy_err: Decryption interruptions counter
* @phy_err_stats: Individual PHY error statistics
* @rx_len_err: No. of frames discarded due to bad length.
* @rx_oom_err: No. of frames dropped due to OOM issues.
* @rx_rate_err: No. of frames dropped due to rate errors.
* @rx_too_many_frags_err: Frames dropped due to too-many-frags received.
* @rx_beacons: No. of beacons received.
* @rx_frags: No. of rx-fragements received.
* @rx_spectral: No of spectral packets received.
*/
struct ath_rx_stats {
u32 rx_pkts_all;
u32 rx_bytes_all;
u32 crc_err;
u32 decrypt_crc_err;
u32 phy_err;
u32 mic_err;
u32 pre_delim_crc_err;
u32 post_delim_crc_err;
u32 decrypt_busy_err;
u32 phy_err_stats[ATH9K_PHYERR_MAX];
u32 rx_len_err;
u32 rx_oom_err;
u32 rx_rate_err;
u32 rx_too_many_frags_err;
u32 rx_beacons;
u32 rx_frags;
u32 rx_spectral;
};
#define ANT_MAIN 0
#define ANT_ALT 1
......
......@@ -325,14 +325,14 @@ static inline struct ath9k_htc_tx_ctl *HTC_SKB_CB(struct sk_buff *skb)
#define TX_STAT_INC(c) (hif_dev->htc_handle->drv_priv->debug.tx_stats.c++)
#define TX_STAT_ADD(c, a) (hif_dev->htc_handle->drv_priv->debug.tx_stats.c += a)
#define RX_STAT_INC(c) (hif_dev->htc_handle->drv_priv->debug.rx_stats.c++)
#define RX_STAT_ADD(c, a) (hif_dev->htc_handle->drv_priv->debug.rx_stats.c += a)
#define RX_STAT_INC(c) (hif_dev->htc_handle->drv_priv->debug.skbrx_stats.c++)
#define RX_STAT_ADD(c, a) (hif_dev->htc_handle->drv_priv->debug.skbrx_stats.c += a)
#define CAB_STAT_INC priv->debug.tx_stats.cab_queued++
#define TX_QSTAT_INC(q) (priv->debug.tx_stats.queue_stats[q]++)
void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
struct ath_htc_rx_status *rxs);
struct ath_rx_status *rs);
struct ath_tx_stats {
u32 buf_queued;
......@@ -345,25 +345,18 @@ struct ath_tx_stats {
u32 queue_stats[IEEE80211_NUM_ACS];
};
struct ath_rx_stats {
struct ath_skbrx_stats {
u32 skb_allocated;
u32 skb_completed;
u32 skb_completed_bytes;
u32 skb_dropped;
u32 err_crc;
u32 err_decrypt_crc;
u32 err_mic;
u32 err_pre_delim;
u32 err_post_delim;
u32 err_decrypt_busy;
u32 err_phy;
u32 err_phy_stats[ATH9K_PHYERR_MAX];
};
struct ath9k_debug {
struct dentry *debugfs_phy;
struct ath_tx_stats tx_stats;
struct ath_rx_stats rx_stats;
struct ath_skbrx_stats skbrx_stats;
};
void ath9k_htc_get_et_strings(struct ieee80211_hw *hw,
......
......@@ -243,30 +243,9 @@ static const struct file_operations fops_xmit = {
};
void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
struct ath_htc_rx_status *rxs)
struct ath_rx_status *rs)
{
#define RX_PHY_ERR_INC(c) priv->debug.rx_stats.err_phy_stats[c]++
if (rxs->rs_status & ATH9K_RXERR_CRC)
priv->debug.rx_stats.err_crc++;
if (rxs->rs_status & ATH9K_RXERR_DECRYPT)
priv->debug.rx_stats.err_decrypt_crc++;
if (rxs->rs_status & ATH9K_RXERR_MIC)
priv->debug.rx_stats.err_mic++;
if (rxs->rs_status & ATH9K_RX_DELIM_CRC_PRE)
priv->debug.rx_stats.err_pre_delim++;
if (rxs->rs_status & ATH9K_RX_DELIM_CRC_POST)
priv->debug.rx_stats.err_post_delim++;
if (rxs->rs_status & ATH9K_RX_DECRYPT_BUSY)
priv->debug.rx_stats.err_decrypt_busy++;
if (rxs->rs_status & ATH9K_RXERR_PHY) {
priv->debug.rx_stats.err_phy++;
if (rxs->rs_phyerr < ATH9K_PHYERR_MAX)
RX_PHY_ERR_INC(rxs->rs_phyerr);
}
#undef RX_PHY_ERR_INC
ath9k_cmn_debug_stat_rx(&priv->debug.rx_stats, rs);
}
static ssize_t read_file_recv(struct file *file, char __user *user_buf,
......@@ -274,7 +253,7 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf,
{
#define PHY_ERR(s, p) \
len += scnprintf(buf + len, size - len, "%20s : %10u\n", s, \
priv->debug.rx_stats.err_phy_stats[p]);
priv->debug.rx_stats.phy_err_stats[p]);
struct ath9k_htc_priv *priv = file->private_data;
char *buf;
......@@ -287,36 +266,13 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf,
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "SKBs allocated",
priv->debug.rx_stats.skb_allocated);
priv->debug.skbrx_stats.skb_allocated);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "SKBs completed",
priv->debug.rx_stats.skb_completed);
priv->debug.skbrx_stats.skb_completed);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "SKBs Dropped",
priv->debug.rx_stats.skb_dropped);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "CRC ERR",
priv->debug.rx_stats.err_crc);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "DECRYPT CRC ERR",
priv->debug.rx_stats.err_decrypt_crc);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "MIC ERR",
priv->debug.rx_stats.err_mic);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "PRE-DELIM CRC ERR",
priv->debug.rx_stats.err_pre_delim);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "POST-DELIM CRC ERR",
priv->debug.rx_stats.err_post_delim);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "DECRYPT BUSY ERR",
priv->debug.rx_stats.err_decrypt_busy);
len += scnprintf(buf + len, size - len,
"%20s : %10u\n", "TOTAL PHY ERR",
priv->debug.rx_stats.err_phy);
priv->debug.skbrx_stats.skb_dropped);
PHY_ERR("UNDERRUN", ATH9K_PHYERR_UNDERRUN);
PHY_ERR("TIMING", ATH9K_PHYERR_TIMING);
......@@ -530,6 +486,8 @@ int ath9k_htc_get_et_sset_count(struct ieee80211_hw *hw,
#define STXBASE priv->debug.tx_stats
#define SRXBASE priv->debug.rx_stats
#define SKBTXBASE priv->debug.tx_stats
#define SKBRXBASE priv->debug.skbrx_stats
#define ASTXQ(a) \
data[i++] = STXBASE.a[IEEE80211_AC_BE]; \
data[i++] = STXBASE.a[IEEE80211_AC_BK]; \
......@@ -543,24 +501,24 @@ void ath9k_htc_get_et_stats(struct ieee80211_hw *hw,
struct ath9k_htc_priv *priv = hw->priv;
int i = 0;
data[i++] = STXBASE.skb_success;
data[i++] = STXBASE.skb_success_bytes;
data[i++] = SRXBASE.skb_completed;
data[i++] = SRXBASE.skb_completed_bytes;
data[i++] = SKBTXBASE.skb_success;
data[i++] = SKBTXBASE.skb_success_bytes;
data[i++] = SKBRXBASE.skb_completed;
data[i++] = SKBRXBASE.skb_completed_bytes;
ASTXQ(queue_stats);
data[i++] = SRXBASE.err_crc;
data[i++] = SRXBASE.err_decrypt_crc;
data[i++] = SRXBASE.err_phy;
data[i++] = SRXBASE.err_mic;
data[i++] = SRXBASE.err_pre_delim;
data[i++] = SRXBASE.err_post_delim;
data[i++] = SRXBASE.err_decrypt_busy;
data[i++] = SRXBASE.err_phy_stats[ATH9K_PHYERR_RADAR];
data[i++] = SRXBASE.err_phy_stats[ATH9K_PHYERR_OFDM_TIMING];
data[i++] = SRXBASE.err_phy_stats[ATH9K_PHYERR_CCK_TIMING];
data[i++] = SRXBASE.crc_err;
data[i++] = SRXBASE.decrypt_crc_err;
data[i++] = SRXBASE.phy_err;
data[i++] = SRXBASE.mic_err;
data[i++] = SRXBASE.pre_delim_crc_err;
data[i++] = SRXBASE.post_delim_crc_err;
data[i++] = SRXBASE.decrypt_busy_err;
data[i++] = SRXBASE.phy_err_stats[ATH9K_PHYERR_RADAR];
data[i++] = SRXBASE.phy_err_stats[ATH9K_PHYERR_OFDM_TIMING];
data[i++] = SRXBASE.phy_err_stats[ATH9K_PHYERR_CCK_TIMING];
WARN_ON(i != ATH9K_HTC_SSTATS_LEN);
}
......
......@@ -996,8 +996,6 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
goto rx_next;
}
ath9k_htc_err_stat_rx(priv, rxstatus);
/* Get the RX status information */
memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
......@@ -1005,6 +1003,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
/* Copy everything from ath_htc_rx_status (HTC_RX_FRAME_HEADER).
* After this, we can drop this part of skb. */
rx_status_htc_to_ath(&rx_stats, rxstatus);
ath9k_htc_err_stat_rx(priv, &rx_stats);
rx_status->mactime = be64_to_cpu(rxstatus->rs_tstamp);
skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册