Merge tag 'pr-20150201-x86-entry' of...

Merge tag 'pr-20150201-x86-entry' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux into x86/asm

Pull "x86: Entry cleanups and a bugfix for 3.20" from Andy Lutomirski:

 " This fixes a bug in the RCU code I added in ist_enter.  It also includes
   the sysret stuff discussed here:

     http://lkml.kernel.org/g/cover.1421453410.git.luto%40amacapital.net "
Signed-off-by: NIngo Molnar <mingo@kernel.org>

arch/x86/kernel/entry_64.S

@@ -361,15 +361,12 @@ system_call_fastpath:
  * Has incomplete stack frame and undefined top of stack.
  */
 ret_from_sys_call:
-	movl $_TIF_ALLWORK_MASK,%edi
-	/* edi:	flagmask */
-sysret_check:
+	testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+	jnz int_ret_from_sys_call_fixup	/* Go the the slow path */
+
 	LOCKDEP_SYS_EXIT
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
-	andl %edi,%edx
-	jnz  sysret_careful
 	CFI_REMEMBER_STATE
 	/*
 	 * sysretq will re-enable interrupts:
@@ -383,49 +380,10 @@ sysret_check:
 	USERGS_SYSRET64
 
 	CFI_RESTORE_STATE
-	/* Handle reschedules */
-	/* edx:	work, edi: workmask */
-sysret_careful:
-	bt $TIF_NEED_RESCHED,%edx
-	jnc sysret_signal
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi %rdi
-	SCHEDULE_USER
-	popq_cfi %rdi
-	jmp sysret_check
 
-	/* Handle a signal */
-sysret_signal:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-#ifdef CONFIG_AUDITSYSCALL
-	bt $TIF_SYSCALL_AUDIT,%edx
-	jc sysret_audit
-#endif
-	/*
-	 * We have a signal, or exit tracing or single-step.
-	 * These all wind up with the iret return path anyway,
-	 * so just join that path right now.
-	 */
+int_ret_from_sys_call_fixup:
 	FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
-	jmp int_check_syscall_exit_work
-
-#ifdef CONFIG_AUDITSYSCALL
-	/*
-	 * Return fast path for syscall audit.  Call __audit_syscall_exit()
-	 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
-	 * masked off.
-	 */
-sysret_audit:
-	movq RAX-ARGOFFSET(%rsp),%rsi	/* second arg, syscall return value */
-	cmpq $-MAX_ERRNO,%rsi	/* is it < -MAX_ERRNO? */
-	setbe %al		/* 1 if so, 0 if not */
-	movzbl %al,%edi		/* zero-extend that into %edi */
-	call __audit_syscall_exit
-	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
-	jmp sysret_check
-#endif	/* CONFIG_AUDITSYSCALL */
+	jmp int_ret_from_sys_call
 
 	/* Do syscall tracing */
 tracesys:
@@ -794,6 +752,60 @@ retint_swapgs:		/* return to user-space */
 	 */
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_IRETQ
+
+	/*
+	 * Try to use SYSRET instead of IRET if we're returning to
+	 * a completely clean 64-bit userspace context.
+	 */
+	movq (RCX-R11)(%rsp), %rcx
+	cmpq %rcx,(RIP-R11)(%rsp)		/* RCX == RIP */
+	jne opportunistic_sysret_failed
+
+	/*
+	 * On Intel CPUs, sysret with non-canonical RCX/RIP will #GP
+	 * in kernel space.  This essentially lets the user take over
+	 * the kernel, since userspace controls RSP.  It's not worth
+	 * testing for canonicalness exactly -- this check detects any
+	 * of the 17 high bits set, which is true for non-canonical
+	 * or kernel addresses.  (This will pessimize vsyscall=native.
+	 * Big deal.)
+	 *
+	 * If virtual addresses ever become wider, this will need
+	 * to be updated to remain correct on both old and new CPUs.
+	 */
+	.ifne __VIRTUAL_MASK_SHIFT - 47
+	.error "virtual address width changed -- sysret checks need update"
+	.endif
+	shr $__VIRTUAL_MASK_SHIFT, %rcx
+	jnz opportunistic_sysret_failed
+
+	cmpq $__USER_CS,(CS-R11)(%rsp)		/* CS must match SYSRET */
+	jne opportunistic_sysret_failed
+
+	movq (R11-ARGOFFSET)(%rsp), %r11
+	cmpq %r11,(EFLAGS-ARGOFFSET)(%rsp)	/* R11 == RFLAGS */
+	jne opportunistic_sysret_failed
+
+	testq $X86_EFLAGS_RF,%r11		/* sysret can't restore RF */
+	jnz opportunistic_sysret_failed
+
+	/* nothing to check for RSP */
+
+	cmpq $__USER_DS,(SS-ARGOFFSET)(%rsp)	/* SS must match SYSRET */
+	jne opportunistic_sysret_failed
+
+	/*
+	 * We win!  This label is here just for ease of understanding
+	 * perf profiles.  Nothing jumps here.
+	 */
+irq_return_via_sysret:
+	CFI_REMEMBER_STATE
+	RESTORE_ARGS 1,8,1
+	movq (RSP-RIP)(%rsp),%rsp
+	USERGS_SYSRET64
+	CFI_RESTORE_STATE
+
+opportunistic_sysret_failed:
 	SWAPGS
 	jmp restore_args
 

arch/x86/kernel/traps.c

@@ -110,15 +110,11 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 
 enum ctx_state ist_enter(struct pt_regs *regs)
 {
-	/*
-	 * We are atomic because we're on the IST stack (or we're on x86_32,
-	 * in which case we still shouldn't schedule.
-	 */
-	preempt_count_add(HARDIRQ_OFFSET);
+	enum ctx_state prev_state;
 
 	if (user_mode_vm(regs)) {
 		/* Other than that, we're just an exception. */
-		return exception_enter();
+		prev_state = exception_enter();
 	} else {
 		/*
 		 * We might have interrupted pretty much anything.  In
@@ -127,12 +123,27 @@ enum ctx_state ist_enter(struct pt_regs *regs)
 		 * but we need to notify RCU.
 		 */
 		rcu_nmi_enter();
-		return IN_KERNEL;  /* the value is irrelevant. */
+		prev_state = IN_KERNEL;  /* the value is irrelevant. */
 	}
+
+	/*
+	 * We are atomic because we're on the IST stack (or we're on x86_32,
+	 * in which case we still shouldn't schedule).
+	 *
+	 * This must be after exception_enter(), because exception_enter()
+	 * won't do anything if in_interrupt() returns true.
+	 */
+	preempt_count_add(HARDIRQ_OFFSET);
+
+	/* This code is a bit fragile.  Test it. */
+	rcu_lockdep_assert(rcu_is_watching(), "ist_enter didn't work");
+
+	return prev_state;
 }
 
 void ist_exit(struct pt_regs *regs, enum ctx_state prev_state)
 {
+	/* Must be before exception_exit. */
 	preempt_count_sub(HARDIRQ_OFFSET);
 
 	if (user_mode_vm(regs))