ARM: S5PV210: GONI: Add support for QT602240 TS driver

Add required platform definitions for QT602240 touchscreen on I2C2 bus.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pv210/Kconfig

@@ -74,6 +74,7 @@ config MACH_AQUILA
 config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
+	select S5P_GPIO_INT
 	select S3C_DEV_FB
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -82,11 +83,13 @@ config MACH_GONI
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
 	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_ONENAND
 	select SAMSUNG_DEV_KEYPAD
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
 	help

arch/arm/mach-s5pv210/mach-goni.c

@@ -15,6 +15,7 @@
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/i2c/qt602240_ts.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
@@ -219,6 +220,51 @@ static void __init goni_radio_init(void)
 	gpio_direction_output(gpio, 1);
 }
 
+/* TSP */
+static struct qt602240_platform_data qt602240_platform_data = {
+	.x_line		= 17,
+	.y_line		= 11,
+	.x_size		= 800,
+	.y_size		= 480,
+	.blen		= 0x21,
+	.threshold	= 0x28,
+	.voltage	= 2800000,              /* 2.8V */
+	.orient		= QT602240_DIAGONAL,
+};
+
+static struct s3c2410_platform_i2c i2c2_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 2,
+	.slave_addr	= 0x10,
+	.frequency	= 400 * 1000,
+	.sda_delay	= 100,
+};
+
+static struct i2c_board_info i2c2_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("qt602240_ts", 0x4a),
+		.platform_data = &qt602240_platform_data,
+	},
+};
+
+static void __init goni_tsp_init(void)
+{
+	int gpio;
+
+	gpio = S5PV210_GPJ1(3);		/* XMSMADDR_11 */
+	gpio_request(gpio, "TSP_LDO_ON");
+	gpio_direction_output(gpio, 1);
+	gpio_export(gpio, 0);
+
+	gpio = S5PV210_GPJ0(5);		/* XMSMADDR_5 */
+	gpio_request(gpio, "TSP_INT");
+
+	s5p_register_gpio_interrupt(gpio);
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+	i2c2_devs[0].irq = gpio_to_irq(gpio);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -610,6 +656,7 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_usb_hsotg,
 	&samsung_device_keypad,
 	&s3c_device_i2c1,
+	&s3c_device_i2c2,
 };
 
 static void __init goni_map_io(void)
@@ -628,6 +675,13 @@ static void __init goni_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
+	/* TSP: call before I2C 2 registeration */
+	goni_tsp_init();
+
+	/* I2C2 */
+	s3c_i2c2_set_platdata(&i2c2_data);
+	i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
+
 	/* PMIC */
 	goni_pmic_init();
 	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,