ARM: dts: k2hk-evm: add leds supports

Keystone EVMK2HX supports 4 debug LEDs controlled by GPIO lines as
following (active level is high);

DBG_D1 green gpio12
DBG_D1 red   gpio13
DBG_D1 blue  gpio14
DBG_D1 blue  gpio15

For more information see schematics:
 http://wfcache.advantech.com/www/support/TI-EVM/download/Schematics/PDF/K2H_K2EVM-HK_SCH_A102_Rev1_0.pdfSigned-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

arch/arm/boot/dts/k2hk-evm.dts

@@ -52,6 +52,29 @@
 			};
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug1_1 {
+			label = "keystone:green:debug1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+		};
+
+		debug1_2 {
+			label = "keystone:red:debug1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+		};
+
+		debug2 {
+			label = "keystone:blue:debug2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+		};
+
+		debug3 {
+			label = "keystone:blue:debug3";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+		};
+	};
 };
 
 &usb_phy {