Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 b37665e0 编写于 作者: A Andy Fleming 提交者： Paul Mackerras
浏览文件
操作

[PATCH] ppc32: 85xx PHY Platform Update 

This patch updates the 85xx platform code to support the new PHY Layer.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <Kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 dd03d25f
隐藏空白更改
内联 并排
Showing with 131 addition and 78 deletion
arch/ppc/platforms/85xx/mpc8540_ads.c
浏览文件 @ b37665e0
......@@ -52,6 +52,10 @@
#include <syslib/ppc85xx_setup.h>
static const char *GFAR_PHY_0 = "phy0:0";
static const char *GFAR_PHY_1 = "phy0:1";
static const char *GFAR_PHY_3 = "phy0:3";
/* ************************************************************************
*
* Setup the architecture
......@@ -63,6 +67,7 @@ mpc8540ads_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
......@@ -89,34 +94,35 @@ mpc8540ads_setup_arch(void)
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
/* setup the board related info for the MDIO bus */
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
mdata->irq[0] = MPC85xx_IRQ_EXT5;
mdata->irq[1] = MPC85xx_IRQ_EXT5;
mdata->irq[2] = -1;
mdata->irq[3] = MPC85xx_IRQ_EXT5;
mdata->irq[31] = -1;
mdata->paddr += binfo->bi_immr_base;
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 0;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 1;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
if (pdata) {
pdata->board_flags = 0;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 3;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_3;
memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
}
......
arch/ppc/platforms/85xx/mpc8560_ads.c
浏览文件 @ b37665e0
......@@ -56,6 +56,10 @@
#include <syslib/ppc85xx_setup.h>
static const char *GFAR_PHY_0 = "phy0:0";
static const char *GFAR_PHY_1 = "phy0:1";
static const char *GFAR_PHY_3 = "phy0:3";
/* ************************************************************************
*
* Setup the architecture
......@@ -68,6 +72,7 @@ mpc8560ads_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
cpm2_reset();
......@@ -86,24 +91,28 @@ mpc8560ads_setup_arch(void)
mpc85xx_setup_hose();
#endif
/* setup the board related info for the MDIO bus */
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
mdata->irq[0] = MPC85xx_IRQ_EXT5;
mdata->irq[1] = MPC85xx_IRQ_EXT5;
mdata->irq[2] = -1;
mdata->irq[3] = MPC85xx_IRQ_EXT5;
mdata->irq[31] = -1;
mdata->paddr += binfo->bi_immr_base;
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 0;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 1;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
......
arch/ppc/platforms/85xx/mpc85xx_cds_common.c
浏览文件 @ b37665e0
......@@ -391,6 +391,9 @@ mpc85xx_cds_pcibios_fixup(void)
TODC_ALLOC();
static const char *GFAR_PHY_0 = "phy0:0";
static const char *GFAR_PHY_1 = "phy0:1";
/* ************************************************************************
*
* Setup the architecture
......@@ -402,6 +405,7 @@ mpc85xx_cds_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
......@@ -445,44 +449,42 @@ mpc85xx_cds_setup_arch(void)
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
/* setup the board related info for the MDIO bus */
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
mdata->irq[0] = MPC85xx_IRQ_EXT5;
mdata->irq[1] = MPC85xx_IRQ_EXT5;
mdata->irq[2] = -1;
mdata->irq[3] = -1;
mdata->irq[31] = -1;
mdata->paddr += binfo->bi_immr_base;
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 0;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 1;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 0;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 1;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
......
arch/ppc/platforms/85xx/sbc8560.c
浏览文件 @ b37665e0
......@@ -91,6 +91,9 @@ sbc8560_early_serial_map(void)
}
#endif
static const char *GFAR_PHY_25 = "phy0:25";
static const char *GFAR_PHY_26 = "phy0:26";
/* ************************************************************************
*
* Setup the architecture
......@@ -102,6 +105,7 @@ sbc8560_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
......@@ -126,24 +130,26 @@ sbc8560_setup_arch(void)
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
/* setup the board related info for the MDIO bus */
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
mdata->irq[25] = MPC85xx_IRQ_EXT6;
mdata->irq[26] = MPC85xx_IRQ_EXT7;
mdata->irq[31] = -1;
mdata->paddr += binfo->bi_immr_base;
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT6;
pdata->phyid = 25;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_25;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
pdata->interruptPHY = MPC85xx_IRQ_EXT7;
pdata->phyid = 26;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_26;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
......
arch/ppc/platforms/85xx/stx_gp3.c
浏览文件 @ b37665e0
......@@ -91,6 +91,9 @@ static u8 gp3_openpic_initsenses[] __initdata = {
0x0, /* External 11: */
};
static const char *GFAR_PHY_2 = "phy0:2";
static const char *GFAR_PHY_4 = "phy0:4";
/*
* Setup the architecture
*/
......@@ -100,6 +103,7 @@ gp3_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
cpm2_reset();
......@@ -118,23 +122,26 @@ gp3_setup_arch(void)
mpc85xx_setup_hose();
#endif
/* setup the board related info for the MDIO bus */
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
mdata->irq[2] = MPC85xx_IRQ_EXT5;
mdata->irq[4] = MPC85xx_IRQ_EXT5;
mdata->irq[31] = -1;
mdata->paddr += binfo->bi_immr_base;
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 2;
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_2;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 4;
/* fixup phy address */
pdata->phy_reg_addr += binfo->bi_immr_base;
pdata->bus_id = GFAR_PHY_4;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
......
arch/ppc/syslib/mpc85xx_devices.c
浏览文件 @ b37665e0
......@@ -25,19 +25,20 @@
/* We use offsets for IORESOURCE_MEM since we do not know at compile time
* what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
*/
struct gianfar_mdio_data mpc85xx_mdio_pdata = {
.paddr = MPC85xx_MIIM_OFFSET,
};
static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR,
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR,
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
......@@ -46,7 +47,6 @@ static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
......@@ -55,7 +55,6 @@ static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
......@@ -64,7 +63,6 @@ static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
......@@ -73,11 +71,10 @@ static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_fec_pdata = {
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
.device_flags = 0,
};
static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
......@@ -719,6 +716,12 @@ struct platform_device ppc_sys_platform_devices[] = {
},
},
},
[MPC85xx_MDIO] = {
.name = "fsl-gianfar_mdio",
.id = 0,
.dev.platform_data = &mpc85xx_mdio_pdata,
.num_resources = 0,
},
};
static int __init mach_mpc85xx_fixup(struct platform_device *pdev)
......
arch/ppc/syslib/mpc85xx_sys.c
浏览文件 @ b37665e0
......@@ -24,19 +24,19 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8540",
.mask = 0xFFFF0000,
.value = 0x80300000,
.num_devices = 10,
.num_devices = 11,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8560",
.mask = 0xFFFF0000,
.value = 0x80700000,
.num_devices = 19,
.num_devices = 20,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
......@@ -45,14 +45,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2,
MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8541",
.mask = 0xFFFF0000,
.value = 0x80720000,
.num_devices = 13,
.num_devices = 14,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
......@@ -60,13 +60,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8541E",
.mask = 0xFFFF0000,
.value = 0x807A0000,
.num_devices = 14,
.num_devices = 15,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
......@@ -74,13 +75,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8555",
.mask = 0xFFFF0000,
.value = 0x80710000,
.num_devices = 19,
.num_devices = 20,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
......@@ -91,13 +93,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
MPC85xx_CPM_USB,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8555E",
.mask = 0xFFFF0000,
.value = 0x80790000,
.num_devices = 20,
.num_devices = 21,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
......@@ -108,6 +111,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
MPC85xx_CPM_USB,
MPC85xx_MDIO,
},
},
/* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */
......@@ -115,104 +119,112 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8548E",
.mask = 0xFFFF00F0,
.value = 0x80390010,
.num_devices = 13,
.num_devices = 14,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8548",
.mask = 0xFFFF00F0,
.value = 0x80310010,
.num_devices = 12,
.num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8547E",
.mask = 0xFFFF00F0,
.value = 0x80390010,
.num_devices = 13,
.num_devices = 14,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8547",
.mask = 0xFFFF00F0,
.value = 0x80310010,
.num_devices = 12,
.num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8545E",
.mask = 0xFFFF00F0,
.value = 0x80390010,
.num_devices = 11,
.num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8545",
.mask = 0xFFFF00F0,
.value = 0x80310010,
.num_devices = 10,
.num_devices = 11,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8543E",
.mask = 0xFFFF00F0,
.value = 0x803A0010,
.num_devices = 11,
.num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8543",
.mask = 0xFFFF00F0,
.value = 0x80320010,
.num_devices = 10,
.num_devices = 11,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_MDIO,
},
},
{ /* default match */
......
include/asm-ppc/mpc85xx.h
浏览文件 @ b37665e0
......@@ -67,6 +67,8 @@ extern unsigned char __res[];
#define MPC85xx_DMA3_SIZE (0x00080)
#define MPC85xx_ENET1_OFFSET (0x24000)
#define MPC85xx_ENET1_SIZE (0x01000)
#define MPC85xx_MIIM_OFFSET (0x24520)
#define MPC85xx_MIIM_SIZE (0x00018)
#define MPC85xx_ENET2_OFFSET (0x25000)
#define MPC85xx_ENET2_SIZE (0x01000)
#define MPC85xx_ENET3_OFFSET (0x26000)
......@@ -132,6 +134,7 @@ enum ppc_sys_devices {
MPC85xx_eTSEC3,
MPC85xx_eTSEC4,
MPC85xx_IIC2,
MPC85xx_MDIO,
};
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
......
include/linux/fsl_devices.h
浏览文件 @ b37665e0
......@@ -47,16 +47,21 @@
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
u32 phy_reg_addr;
/* board specific information */
u32 board_flags;
u32 phy_flags;
u32 phyid;
u32 interruptPHY;
const char *bus_id;
u8 mac_addr[6];
};
struct gianfar_mdio_data {
/* device specific information */
u32 paddr;
/* board specific information */
int irq[32];
};
/* Flags related to gianfar device features */
#define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001
#define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或