提交 b31a0fec 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add support for new USB Tablet PCs
  Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback
  Input: i8042 - add Compal Hel80 laptop to nomux blacklist
  Input: cm109 - add keymap for ATCom AU-100 phone
  Input: fix the example of an input device driver
  Input: psmouse - fix incorrect validate_byte check in OLPC protocol
  Input: atkbd - cancel delayed work before freeing its structure
  Input: atkbd - add keymap quirk for Inventec Symphony systems
  Input: i8042 - add Dell XPS M1530 to nomux list
  Input: elo - fix format string in elo driver
......@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
static struct input_dev *button_dev;
static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
return IRQ_HANDLED;
}
static int __init button_init(void)
......
......@@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio)
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
flush_scheduled_work();
cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
......@@ -867,6 +867,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
atkbd->force_release_mask);
}
/*
* Inventec system with broken key release on volume keys
*/
static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
{
const unsigned int forced_release_keys[] = {
0xae, 0xb0,
};
int i;
if (atkbd->set == 2)
for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
__set_bit(forced_release_keys[i],
atkbd->force_release_mask);
}
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
......@@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
{
.ident = "Inventec Symphony",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
},
.callback = atkbd_setup_fixup,
.driver_data = atkbd_inventec_keymap_fixup,
},
{ }
};
......
......@@ -42,7 +42,7 @@
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
......@@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode)
}
}
/*
* Keymap for ATCom AU-100
* http://www.atcom.cn/En_products_AU100.html
* http://www.packetizer.com/products/au100/
* http://www.voip-info.org/wiki/view/AU-100
*
* Contributed by daniel@gimpelevich.san-francisco.ca.us
*/
static unsigned short keymap_atcom(int scancode)
{
switch (scancode) { /* phone key: */
case 0x82: return KEY_NUMERIC_0; /* 0 */
case 0x11: return KEY_NUMERIC_1; /* 1 */
case 0x12: return KEY_NUMERIC_2; /* 2 */
case 0x14: return KEY_NUMERIC_3; /* 3 */
case 0x21: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x24: return KEY_NUMERIC_6; /* 6 */
case 0x41: return KEY_NUMERIC_7; /* 7 */
case 0x42: return KEY_NUMERIC_8; /* 8 */
case 0x44: return KEY_NUMERIC_9; /* 9 */
case 0x84: return KEY_NUMERIC_POUND; /* # */
case 0x81: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* pickup */
case 0x28: return KEY_ESC; /* hangup */
case 0x48: return KEY_LEFT; /* left arrow */
case 0x88: return KEY_RIGHT; /* right arrow */
default: return special_keymap(scancode);
}
}
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
......@@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void)
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
} else if (!strcasecmp(phone, "atcom")) {
keymap = keymap_atcom;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
......
......@@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
*/
static int hgpk_validate_byte(unsigned char *packet)
{
return (packet[0] & 0x0C) == 0x08;
return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
......
......@@ -337,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
{
.ident = "Dell XPS M1530",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
},
},
{
.ident = "Compal HEL80I",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
},
},
{ }
};
......
......@@ -66,6 +66,7 @@
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
* v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
......@@ -86,7 +87,7 @@
/*
* Version Information
*/
#define DRIVER_VERSION "v1.48"
#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
......@@ -103,15 +104,15 @@ struct wacom {
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
struct wacom_wac * wacom_wac;
struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
struct wacom * wacom;
struct urb * urb;
struct wacom *wacom;
struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
......@@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
extern const struct usb_device_id * get_device_table(void);
extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
extern const struct usb_device_id *get_device_table(void);
#endif
......@@ -14,8 +14,41 @@
#include "wacom.h"
#include "wacom_wac.h"
/* defines to get HID report descriptor */
#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
#define HID_USAGE_UNDEFINED 0x00
#define HID_USAGE_PAGE 0x05
#define HID_USAGE_PAGE_DIGITIZER 0x0d
#define HID_USAGE_PAGE_DESKTOP 0x01
#define HID_USAGE 0x09
#define HID_USAGE_X 0x30
#define HID_USAGE_Y 0x31
#define HID_USAGE_X_TILT 0x3d
#define HID_USAGE_Y_TILT 0x3e
#define HID_USAGE_FINGER 0x22
#define HID_USAGE_STYLUS 0x20
#define HID_COLLECTION 0xc0
enum {
WCM_UNDEFINED = 0,
WCM_DESKTOP,
WCM_DIGITIZER,
};
struct hid_descriptor {
struct usb_descriptor_header header;
__le16 bcdHID;
u8 bCountryCode;
u8 bNumDescriptors;
u8 bDescriptorType;
__le16 wDescriptorLength;
} __attribute__ ((packed));
/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
......@@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb)
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
......@@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data)
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
return;
}
static int wacom_open(struct input_dev *dev)
......@@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev)
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
......@@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
......@@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
......@@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
......@@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
......@@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
......@@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
BIT_MASK(BTN_TOOL_RUBBER);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
......@@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
struct wacom_wac *wacom_wac)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct wacom_features *features = wacom_wac->features;
char limit = 0, result = 0;
int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
unsigned char *report;
report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
if (!report)
return -ENOMEM;
/* retrive report descriptors */
do {
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR,
USB_RECIP_INTERFACE | USB_DIR_IN,
HID_DEVICET_REPORT << 8,
intf->altsetting[0].desc.bInterfaceNumber, /* interface */
report,
hid_desc->wDescriptorLength,
5000); /* 5 secs */
} while (result < 0 && limit++ < 5);
if (result < 0)
goto out;
for (i = 0; i < hid_desc->wDescriptorLength; i++) {
switch (report[i]) {
case HID_USAGE_PAGE:
switch (report[i + 1]) {
case HID_USAGE_PAGE_DIGITIZER:
usage = WCM_DIGITIZER;
i++;
break;
case HID_USAGE_PAGE_DESKTOP:
usage = WCM_DESKTOP;
i++;
break;
}
break;
case HID_USAGE:
switch (report[i + 1]) {
case HID_USAGE_X:
if (usage == WCM_DESKTOP) {
if (finger) {
features->touch_x_max =
features->touch_y_max =
wacom_le16_to_cpu(&report[i + 3]);
features->x_max =
wacom_le16_to_cpu(&report[i + 6]);
i += 7;
} else if (pen) {
features->x_max =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
}
} else if (usage == WCM_DIGITIZER) {
/* max pressure isn't reported
features->pressure_max = (unsigned short)
(report[i+4] << 8 | report[i + 3]);
*/
features->pressure_max = 255;
i += 4;
}
break;
case HID_USAGE_Y:
if (usage == WCM_DESKTOP)
features->y_max =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
break;
case HID_USAGE_FINGER:
finger = 1;
i++;
break;
case HID_USAGE_STYLUS:
pen = 1;
i++;
break;
case HID_USAGE_UNDEFINED:
if (usage == WCM_DESKTOP && finger) /* capacity */
features->pressure_max =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
break;
}
break;
case HID_COLLECTION:
/* reset UsagePage ans Finger */
finger = usage = 0;
break;
}
}
result = 0;
out:
kfree(report);
return result;
}
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
......@@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
wacom_wac->features = get_wacom_feature(id);
BUG_ON(wacom_wac->features->pktlen > 10);
wacom_wac->features = features = get_wacom_feature(id);
BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
......@@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
input_dev->open = wacom_open;
input_dev->close = wacom_close;
endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
if (wacom_wac->features->type == TABLETPC) {
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
if (usb_get_extra_descriptor(&interface->endpoint[0],
HID_DEVICET_REPORT, &hid_desc)) {
printk("wacom: can not retrive extra class descriptor\n");
goto fail2;
}
}
error = wacom_parse_hid(intf, hid_desc, wacom_wac);
if (error)
goto fail2;
}
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
if (features->type == TABLETPC) {
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
}
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
endpoint = &intf->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
......@@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
if (error)
goto fail3;
/* Ask the tablet to report tablet data. Repeat until it succeeds */
do {
rep_data[0] = 2;
rep_data[1] = 2;
usb_set_report(intf, 3, 2, rep_data, 2);
usb_get_report(intf, 3, 2, rep_data, 2);
} while (rep_data[1] != 2 && limit++ < 5);
/*
* Ask the tablet to report tablet data if it is not a Tablet PC.
* Repeat until it succeeds
*/
if (wacom_wac->features->type != TABLETPC) {
do {
rep_data[0] = 2;
rep_data[1] = 2;
error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
2, rep_data, 2);
if (error >= 0)
error = usb_get_report(intf,
WAC_HID_FEATURE_REPORT, 2,
rep_data, 2);
} while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
}
usb_set_intfdata(intf, wacom);
return 0;
......@@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf)
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
usb_buffer_free(interface_to_usbdev(intf), 10,
wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
......
......@@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
return 1;
}
int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
{
char *data = wacom->data;
int prox = 0, pressure;
static int stylusInProx, touchInProx = 1, touchOut;
struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
dbg("wacom_tpc_irq: received report #%d", data[0]);
if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
if (urb->actual_length == 5) { /* with touch */
prox = data[0] & 0x03;
} else { /* with capacity */
prox = data[1] & 0x03;
}
if (!stylusInProx) { /* stylus not in prox */
if (prox) {
if (touchInProx) {
wacom->tool[1] = BTN_TOOL_DOUBLETAP;
wacom->id[0] = TOUCH_DEVICE_ID;
if (urb->actual_length != 5) {
wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
} else {
wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
wacom_report_key(wcombo, BTN_TOUCH, 1);
}
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
touchOut = 1;
return 1;
}
} else {
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
wacom_report_key(wcombo, BTN_TOUCH, 0);
touchOut = 0;
touchInProx = 1;
return 1;
}
} else if (touchOut || !prox) { /* force touch out-prox */
wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
wacom_report_key(wcombo, BTN_TOUCH, 0);
touchOut = 0;
touchInProx = 1;
return 1;
}
} else if (data[0] == 2) { /* Penabled */
prox = data[1] & 0x20;
touchInProx = 0;
wacom->id[0] = ERASER_DEVICE_ID;
/*
* if going from out of proximity into proximity select between the eraser
* and the pen based on the state of the stylus2 button, choose eraser if
* pressed else choose pen. if not a proximity change from out to in, send
* an out of proximity for previous tool then a in for new tool.
*/
if (prox) { /* in prox */
if (!wacom->tool[0]) {
/* Going into proximity select tool */
wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
if (wacom->tool[1] == BTN_TOOL_PEN)
wacom->id[0] = STYLUS_DEVICE_ID;
} else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
/*
* was entered with stylus2 pressed
* report out proximity for previous tool
*/
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
wacom_report_key(wcombo, wacom->tool[1], 0);
wacom_input_sync(wcombo);
/* set new tool */
wacom->tool[1] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
return 0;
}
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
/* Unknown tool selected default to pen tool */
wacom->tool[1] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
pressure = ((data[7] & 0x01) << 8) | data[6];
if (pressure < 0)
pressure = wacom->features->pressure_max + pressure + 1;
wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
wacom_report_key(wcombo, BTN_TOUCH, pressure);
} else {
wacom_report_abs(wcombo, ABS_PRESSURE, 0);
wacom_report_key(wcombo, BTN_STYLUS, 0);
wacom_report_key(wcombo, BTN_STYLUS2, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
}
wacom_report_key(wcombo, wacom->tool[1], prox);
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
stylusInProx = prox;
wacom->tool[0] = prox;
return 1;
}
return 0;
}
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
return (wacom_penpartner_irq(wacom_wac, wcombo));
break;
return wacom_penpartner_irq(wacom_wac, wcombo);
case PL:
return (wacom_pl_irq(wacom_wac, wcombo));
break;
return wacom_pl_irq(wacom_wac, wcombo);
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
return (wacom_graphire_irq(wacom_wac, wcombo));
break;
return wacom_graphire_irq(wacom_wac, wcombo);
case PTU:
return (wacom_ptu_irq(wacom_wac, wcombo));
break;
return wacom_ptu_irq(wacom_wac, wcombo);
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
return (wacom_intuos_irq(wacom_wac, wcombo));
break;
return wacom_intuos_irq(wacom_wac, wcombo);
case TABLETPC:
return wacom_tpc_irq(wacom_wac, wcombo);
default:
return 0;
}
......@@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
/* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
break;
/* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
......@@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
{ "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
......@@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
{ "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
{ "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
......@@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
......@@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
const struct usb_device_id * get_device_table(void) {
const struct usb_device_id * id_table = wacom_ids;
const struct usb_device_id *get_device_table(void)
{
const struct usb_device_id *id_table = wacom_ids;
return id_table;
}
struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
return wf;
}
......
......@@ -10,6 +10,7 @@
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
......@@ -27,6 +28,7 @@ enum {
CINTIQ,
WACOM_BEE,
WACOM_MO,
TABLETPC,
MAX_TYPE
};
......@@ -38,6 +40,8 @@ struct wacom_features {
int pressure_max;
int distance_max;
int type;
int touch_x_max;
int touch_y_max;
};
struct wacom_wac {
......
......@@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo)
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
"features: %x02x, controller: 0x%02x\n",
"features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册