drm/radeon: clean up audio dto programming

Split into DCE2/3 and DCE4/5 variants. Still todo is to
calculate the DTO dividers properly.  Add proper formula
to the comments.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/radeon/evergreen_hdmi.c

@@ -85,6 +85,30 @@ static void evergreen_hdmi_update_avi_infoframe(struct drm_encoder *encoder,
 		frame[0xC] | (frame[0xD] << 8));
 }
 
+static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	u32 base_rate = 48000;
+
+	if (!dig || !dig->afmt)
+		return;
+
+	/* XXX: properly calculate this */
+	/* XXX two dtos; generally use dto0 for hdmi */
+	/* Express [24MHz / target pixel clock] as an exact rational
+	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
+	 * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
+	 */
+	WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
+	WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+	WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
+}
+
+
 /*
  * update the info frames with the data from the current display mode
  */
@@ -104,7 +128,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode
 		return;
 	offset = dig->afmt->offset;
 
-	r600_audio_set_clock(encoder, mode->clock);
+	evergreen_audio_set_dto(encoder, mode->clock);
 
 	WREG32(HDMI_VBI_PACKET_CONTROL + offset,
 	       HDMI_NULL_SEND); /* send null packets when required */

drivers/gpu/drm/radeon/r600_audio.c

@@ -180,65 +180,6 @@ int r600_audio_init(struct radeon_device *rdev)
 	return 0;
 }
 
-/*
- * atach the audio codec to the clock source of the encoder
- */
-void r600_audio_set_clock(struct drm_encoder *encoder, int clock)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	int base_rate = 48000;
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-		WREG32_P(R600_AUDIO_TIMING, 0, ~0x301);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		WREG32_P(R600_AUDIO_TIMING, 0x100, ~0x301);
-		break;
-	default:
-		dev_err(rdev->dev, "Unsupported encoder type 0x%02X\n",
-			  radeon_encoder->encoder_id);
-		return;
-	}
-
-	if (ASIC_IS_DCE4(rdev)) {
-		/* TODO: other PLLs? */
-		WREG32(EVERGREEN_AUDIO_PLL1_MUL, base_rate * 10);
-		WREG32(EVERGREEN_AUDIO_PLL1_DIV, clock * 10);
-		WREG32(EVERGREEN_AUDIO_PLL1_UNK, 0x00000071);
-
-		/* Select DTO source */
-		WREG32(0x5ac, radeon_crtc->crtc_id);
-	} else {
-		switch (dig->dig_encoder) {
-		case 0:
-			WREG32(R600_AUDIO_PLL1_MUL, base_rate * 50);
-			WREG32(R600_AUDIO_PLL1_DIV, clock * 100);
-			WREG32(R600_AUDIO_CLK_SRCSEL, 0);
-			break;
-
-		case 1:
-			WREG32(R600_AUDIO_PLL2_MUL, base_rate * 50);
-			WREG32(R600_AUDIO_PLL2_DIV, clock * 100);
-			WREG32(R600_AUDIO_CLK_SRCSEL, 1);
-			break;
-		default:
-			dev_err(rdev->dev,
-				"Unsupported DIG on encoder 0x%02X\n",
-				radeon_encoder->encoder_id);
-			return;
-		}
-	}
-}
-
 /*
  * release the audio timer
  * TODO: How to do this correctly on SMP systems?

drivers/gpu/drm/radeon/r600_hdmi.c

@@ -226,6 +226,30 @@ static void r600_hdmi_audio_workaround(struct drm_encoder *encoder)
 		 value, ~HDMI0_AUDIO_TEST_EN);
 }
 
+void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+	u32 base_rate = 48000;
+
+	if (!dig || !dig->afmt)
+		return;
+
+	/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
+	 * doesn't matter which one you use.  Just use the first one.
+	 */
+	/* XXX: properly calculate this */
+	/* XXX two dtos; generally use dto0 for hdmi */
+	/* Express [24MHz / target pixel clock] as an exact rational
+	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
+	 * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
+	 */
+	WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
+	WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+	WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+}
 
 /*
  * update the info frames with the data from the current display mode
@@ -246,7 +270,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 		return;
 	offset = dig->afmt->offset;
 
-	r600_audio_set_clock(encoder, mode->clock);
+	r600_audio_set_dto(encoder, mode->clock);
 
 	WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
 	       HDMI0_NULL_SEND); /* send null packets when required */

drivers/gpu/drm/radeon/radeon_asic.h

@@ -374,7 +374,6 @@ void r600_disable_interrupts(struct radeon_device *rdev);
 void r600_rlc_stop(struct radeon_device *rdev);
 /* r600 audio */
 int r600_audio_init(struct radeon_device *rdev);
-void r600_audio_set_clock(struct drm_encoder *encoder, int clock);
 struct r600_audio r600_audio_status(struct radeon_device *rdev);
 void r600_audio_fini(struct radeon_device *rdev);
 int r600_hdmi_buffer_status_changed(struct drm_encoder *encoder);