提交 b050f688 编写于 作者: M Ming Lei 提交者: Paul Walmsley

ARM: OMAP4: hwmod data: introduce fdif(face detect module) hwmod

Add hwmod data for the OMAP4 FDIF IP block.

This patch also includes a change (originally from Fernando Guzman
Lugo <fernando.lugo@ti.com>) to set a softreset delay for the FDIF IP
block:

   http://www.spinics.net/lists/arm-kernel/msg161874.htmlSigned-off-by: NMing Lei <ming.lei@canonical.com>
Acked-by: NBenoît Cousson <b-cousson@ti.com>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
[paul@pwsan.com: rearranged to match script output; fixed FDIF end address to
 match script data; wrote trivial changelog; combined the FDIF portion of
 Fernando's srst_udelay patch]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
上级 6ba5a69e
......@@ -263,7 +263,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = {
* elm
* emif1
* emif2
* fdif
* gpmc
* gpu
* hdq1w
......@@ -815,6 +814,56 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
},
};
/*
* 'fdif' class
* face detection hw accelerator module
*/
static struct omap_hwmod_class_sysconfig omap44xx_fdif_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
/*
* FDIF needs 100 OCP clk cycles delay after a softreset before
* accessing sysconfig again.
* The lowest frequency at the moment for L3 bus is 100 MHz, so
* 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
*
* TODO: Indicate errata when available.
*/
.srst_udelay = 2,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class omap44xx_fdif_hwmod_class = {
.name = "fdif",
.sysc = &omap44xx_fdif_sysc,
};
/* fdif */
static struct omap_hwmod_irq_info omap44xx_fdif_irqs[] = {
{ .irq = 69 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
static struct omap_hwmod omap44xx_fdif_hwmod = {
.name = "fdif",
.class = &omap44xx_fdif_hwmod_class,
.clkdm_name = "iss_clkdm",
.mpu_irqs = omap44xx_fdif_irqs,
.main_clk = "fdif_fck",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
/*
* 'gpio' class
* general purpose io module
......@@ -2980,6 +3029,14 @@ static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* fdif -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_fdif__l3_main_2 = {
.master = &omap44xx_fdif_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* hsi -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
.master = &omap44xx_hsi_hwmod,
......@@ -3530,6 +3587,24 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space omap44xx_fdif_addrs[] = {
{
.pa_start = 0x4a10a000,
.pa_end = 0x4a10a1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> fdif */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__fdif = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_fdif_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_fdif_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
{
.pa_start = 0x4a310000,
......@@ -4687,6 +4762,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_mmc2__l3_main_1,
&omap44xx_mpu__l3_main_1,
&omap44xx_dma_system__l3_main_2,
&omap44xx_fdif__l3_main_2,
&omap44xx_hsi__l3_main_2,
&omap44xx_ipu__l3_main_2,
&omap44xx_iss__l3_main_2,
......@@ -4728,6 +4804,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__dss_rfbi,
&omap44xx_l3_main_2__dss_venc,
&omap44xx_l4_per__dss_venc,
&omap44xx_l4_cfg__fdif,
&omap44xx_l4_wkup__gpio1,
&omap44xx_l4_per__gpio2,
&omap44xx_l4_per__gpio3,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册