ath9k: Fix PLL powersave for AR9485

Use the value in ah->config.pll_pwrsave to determine
which array needs to be loaded. Also, initialize
pll_pwrsave to 1 by default.
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath9k/ar9003_hw.c

@@ -195,16 +195,16 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 		INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
 			       ar9485_1_1_baseband_core_txfir_coeff_japan_2484);
 
-		if (ah->config.no_pll_pwrsave) {
+		if (ah->config.pll_pwrsave & AR_PCIE_PLL_PWRSAVE_CONTROL) {
 			INIT_INI_ARRAY(&ah->iniPcieSerdes,
-				       ar9485_1_1_pcie_phy_clkreq_disable_L1);
+				       ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
 			INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-				       ar9485_1_1_pcie_phy_clkreq_disable_L1);
+				       ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
 		} else {
 			INIT_INI_ARRAY(&ah->iniPcieSerdes,
-				       ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
+				       ar9485_1_1_pcie_phy_clkreq_disable_L1);
 			INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-				       ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
+				       ar9485_1_1_pcie_phy_clkreq_disable_L1);
 		}
 	} else if (AR_SREV_9462_21(ah)) {
 		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],

drivers/net/wireless/ath/ath9k/hw.h

@@ -341,7 +341,7 @@ struct ath9k_ops_config {
 	u32 ant_ctrl_comm2g_switch_enable;
 	bool xatten_margin_cfg;
 	bool alt_mingainidx;
-	bool no_pll_pwrsave;
+	bool pll_pwrsave;
 	bool tx_gain_buffalo;
 	bool led_active_high;
 };

drivers/net/wireless/ath/ath9k/init.c

@@ -437,8 +437,14 @@ static void ath9k_init_pcoem_platform(struct ath_softc *sc)
 		ath_info(common, "Enable WAR for ASPM D3/L1\n");
 	}
 
+	/*
+	 * The default value of pll_pwrsave is 1.
+	 * For certain AR9485 cards, it is set to 0.
+	 */
+	ah->config.pll_pwrsave = 1;
+
 	if (sc->driver_data & ATH9K_PCI_NO_PLL_PWRSAVE) {
-		ah->config.no_pll_pwrsave = true;
+		ah->config.pll_pwrsave = 0;
 		ath_info(common, "Disable PLL PowerSave\n");
 	}