Input: edt-ft5x06 - add support for FT5506

FT5506 is essentially the same as other FT5x06 devices other than
supporting 10 support points.
Signed-off-by: NFranklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

@@ -5,6 +5,7 @@ There are 3 variants of the chip for various touch panel sizes
 FT5206GE1  2.8" .. 3.8"
 FT5306DE4  4.3" .. 7"
 FT5406EE8  7"   .. 8.9"
+FT5506EEG  7"   .. 8.9"
 
 The software interface is identical for all those chips, so that
 currently there is no need for the driver to distinguish between the
@@ -17,6 +18,7 @@ Required properties:
  - compatible:  "edt,edt-ft5206"
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
+           or:  "edt,edt-ft5506"
 
  - reg:         I2C slave address of the chip (0x38)
  - interrupt-parent: a phandle pointing to the interrupt controller

drivers/input/touchscreen/edt-ft5x06.c

@@ -172,7 +172,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 	struct edt_ft5x06_ts_data *tsdata = dev_id;
 	struct device *dev = &tsdata->client->dev;
 	u8 cmd;
-	u8 rdbuf[31];
+	u8 rdbuf[61];
 	int i, type, x, y, id;
 	int offset, tplen, datalen, crclen;
 	int error;
@@ -1052,8 +1052,13 @@ static const struct edt_i2c_chip_data edt_ft5x06_data = {
 	.max_support_points = 5,
 };
 
+static const struct edt_i2c_chip_data edt_ft5506_data = {
+	.max_support_points = 10,
+};
+
 static const struct i2c_device_id edt_ft5x06_ts_id[] = {
 	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
+	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
@@ -1063,6 +1068,7 @@ static const struct of_device_id edt_ft5x06_of_match[] = {
 	{ .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);