Merge branch 'davinci-for-linus' of...

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (69 commits)
  davinci: Initial support for Neuros OSD2 platform.
  davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c
  davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c
  DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM
  DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilities
  davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig
  davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator
  davinci: DA850/OMAP-L138 EVM: register for cpuidle support
  davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register
  davinci: add CPU idle driver
  davinci: DA8XX/OMAP-L1XX: fix compiler warning
  davinci: DA850/OMAP-L138: eliminate static function declaration
  davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII mode
  davinci: DA850/OMAP-L138 EVM: get rid of DA850_UI_EXP config option
  davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY
  davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD is selected
  davinci: DA830/OMAP-L137 EVM: use runtime detection for UI card
  davinci: DA830/OMAP-L137 EVM: remove ifdefs inside da830_evm_init()
  davinci: DA830/OMAP-L137 EVM: fix warning with default config
  davinci: Add NAND support for DA830/OMAP-L137 EVM platform
  ...

arch/arm/configs/da850_omapl138_defconfig → arch/arm/configs/da8xx_omapl_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-davinci1
-# Mon Jun 29 07:54:15 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Oct 22 12:19:19 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,6 +90,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 CONFIG_CP_INTC=y
 
 #
@@ -191,7 +201,7 @@ CONFIG_CP_INTC=y
 # CONFIG_ARCH_DAVINCI_DM644x is not set
 # CONFIG_ARCH_DAVINCI_DM355 is not set
 # CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_ARCH_DAVINCI_DA8XX=y
 # CONFIG_ARCH_DAVINCI_DM365 is not set
@@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y
 #
 # DaVinci Board Type
 #
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DA830_UI=y
+CONFIG_DA830_UI_LCD=y
+# CONFIG_DA830_UI_NAND is not set
 CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DA850_UI_EXP=y
+CONFIG_DA850_UI_NONE=y
+# CONFIG_DA850_UI_RMII is not set
 CONFIG_DAVINCI_MUX=y
 # CONFIG_DAVINCI_MUX_DEBUG is not set
 # CONFIG_DAVINCI_MUX_WARNINGS is not set
@@ -212,7 +229,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -225,9 +242,9 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -248,11 +265,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -268,12 +286,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -287,7 +307,24 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -401,6 +438,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -415,6 +453,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -440,6 +479,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -460,6 +500,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -471,6 +512,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -494,10 +536,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -522,7 +560,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -553,7 +590,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
+CONFIG_TI_DAVINCI_EMAC=y
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
@@ -567,12 +604,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -588,6 +624,7 @@ CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -611,23 +648,30 @@ CONFIG_INPUT_EVBUG=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -636,6 +680,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -684,6 +729,7 @@ CONFIG_HW_RANDOM=m
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -695,6 +741,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -715,14 +762,17 @@ CONFIG_I2C_DAVINCI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -736,8 +786,8 @@ CONFIG_GPIOLIB=y
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
 
 #
 # PCI GPIO expanders:
@@ -746,11 +796,14 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -782,31 +835,56 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+CONFIG_REGULATOR_TPS6507X=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_DAVINCI is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_DA8XX=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -819,6 +897,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 # CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
@@ -834,6 +922,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -842,6 +935,8 @@ CONFIG_SND_DRIVERS=y
 CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
+# CONFIG_SND_DA830_SOC_EVM is not set
+# CONFIG_SND_DA850_SOC_EVM is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
@@ -849,14 +944,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -877,14 +975,17 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -943,7 +1044,6 @@ CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1039,6 +1139,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1056,6 +1157,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1076,29 +1178,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1125,7 +1227,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1157,11 +1258,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/arm/configs/davinci_all_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3-davinci1
-# Fri Jul 17 08:26:52 2009
+# Linux kernel version: 2.6.32-rc4
+# Mon Oct 12 14:13:12 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,17 +91,15 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DMx=y
 
@@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y
 #
 CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
@@ -224,7 +227,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -239,6 +242,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -259,6 +263,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -280,6 +286,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
@@ -412,6 +419,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -452,6 +460,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -461,9 +470,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -499,7 +508,7 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=m
@@ -694,12 +703,10 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -734,6 +741,7 @@ CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -745,10 +753,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
@@ -757,12 +762,16 @@ CONFIG_INPUT_EVBUG=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
@@ -777,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -787,7 +797,17 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_DM355EVM=m
+CONFIG_INPUT_DM365EVM=m
 
 #
 # Hardware I/O ports
@@ -828,13 +848,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -868,13 +888,17 @@ CONFIG_I2C_DAVINCI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -889,7 +913,7 @@ CONFIG_GPIOLIB=y
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCF857X=y
 
 #
 # PCI GPIO expanders:
@@ -898,10 +922,19 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -950,6 +983,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -959,9 +993,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -988,7 +1020,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_DM355EVM_MSP is not set
+CONFIG_MFD_DM355EVM_MSP=y
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -999,9 +1031,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -1013,9 +1047,9 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -1032,6 +1066,7 @@ CONFIG_FIRMWARE_EDID=y
 # Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_DAVINCI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
@@ -1101,7 +1136,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1130,6 +1164,7 @@ CONFIG_HID_CYPRESS=m
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
@@ -1176,6 +1211,7 @@ CONFIG_USB_MON=m
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -1269,6 +1305,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
@@ -1286,6 +1323,7 @@ CONFIG_USB_ZERO=m
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
@@ -1316,8 +1354,10 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_DAVINCI=m
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
@@ -1345,6 +1385,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
 
@@ -1370,6 +1411,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_DM355EVM is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1399,8 +1441,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1429,6 +1474,7 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1500,7 +1546,6 @@ CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1596,6 +1641,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1634,11 +1680,14 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1663,7 +1712,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1681,7 +1730,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1713,11 +1761,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/arm/mach-davinci/Kconfig

@@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830
         bool "DA830/OMAP-L137 based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
+	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138 based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
+	select ARCH_HAS_CPUFREQ
 
 config ARCH_DAVINCI_DA8XX
 	bool
@@ -63,6 +65,13 @@ config MACH_SFFSDR
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
 
+config MACH_NEUROS_OSD2
+	bool "Neuros OSD2 Open Television Set Top Box"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a Neuros OSD2 Open Set Top Box.
+
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
 	default ARCH_DAVINCI_DM355
@@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137 Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
+	select GPIO_PCF857X
 	help
 	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
+choice
+	prompt "Select DA830/OMAP-L137 UI board peripheral"
+	depends on MACH_DAVINCI_DA830_EVM
+	help
+	  The presence of UI card on the DA830/OMAP-L137 EVM is detected
+	  automatically based on successful probe of the I2C based GPIO
+	  expander on that board. This option selected in this menu has
+	  an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+	bool "LCD"
+	help
+	  Say Y here to use the LCD as a framebuffer or simple character
+	  display.
+
+config DA830_UI_NAND
+	bool "NAND flash"
+	help
+	  Say Y here to use the NAND flash.  Do not forget to setup
+	  the switch correctly.
+endchoice
+
 config MACH_DAVINCI_DA850_EVM
 	bool "TI DA850/OMAP-L138 Reference Platform"
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
+	select GPIO_PCA953X
 	help
 	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 
+choice
+	prompt "Select peripherals connected to expander on UI board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The presence of User Interface (UI) card on the DA850/OMAP-L138
+	  EVM is detected automatically based on successful probe of the I2C
+	  based GPIO expander on that card. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+	bool "No peripheral is enabled"
+	help
+	  Say Y if you do not want to enable any of the peripherals connected
+	  to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+
+config DA850_UI_RMII
+	bool "RMII Ethernet PHY"
+	help
+	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
+	  This PHY is found on the UI daughter card that is supplied with
+	  the EVM.
+	  NOTE: Please take care while choosing this option, MII PHY will
+	  not be functional if RMII mode is selected.
+
+endchoice
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI

arch/arm/mach-davinci/Makefile

@@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
+
+# Power Management
+obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o

arch/arm/mach-davinci/board-da830-evm.c

@@ -10,51 +10,194 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cp_intc.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
 #include <mach/da8xx.h>
-#include <mach/asp.h>
+#include <mach/usb.h>
 
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
+#define DA830_EMIF25_ASYNC_DATA_CE3_BASE	0x62000000
+#define DA830_EMIF25_CONTROL_BASE		0x68000000
 
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	}
+/*
+ * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
+ */
+#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
+#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
+
+static const short da830_evm_usb11_pins[] = {
+	DA830_GPIO1_15, DA830_GPIO2_4,
+	-1
 };
 
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
+static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
+
+static int da830_evm_usb_set_power(unsigned port, int on)
+{
+	gpio_set_value(ON_BD_USB_DRV, on);
+	return 0;
+}
+
+static int da830_evm_usb_get_power(unsigned port)
+{
+	return gpio_get_value(ON_BD_USB_DRV);
+}
+
+static int da830_evm_usb_get_oci(unsigned port)
+{
+	return !gpio_get_value(ON_BD_USB_OVC);
+}
+
+static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
+
+static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
+{
+	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
+	int error	= 0;
+
+	if (handler != NULL) {
+		da830_evm_usb_ocic_handler = handler;
+
+		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				    "OHCI over-current indicator", NULL);
+		if (error)
+			printk(KERN_ERR "%s: could not request IRQ to watch "
+			       "over-current indicator changes\n", __func__);
+	} else
+		free_irq(irq, NULL);
+
+	return error;
+}
+
+static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
+	.set_power	= da830_evm_usb_set_power,
+	.get_power	= da830_evm_usb_get_power,
+	.get_oci	= da830_evm_usb_get_oci,
+	.ocic_notify	= da830_evm_usb_ocic_notify,
+
+	/* TPS2065 switch @ 5V */
+	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
 };
 
+static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
+{
+	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
+	return IRQ_HANDLED;
+}
+
+static __init void da830_evm_usb_init(void)
+{
+	u32 cfgchip2;
+	int ret;
+
+	/*
+	 * Set up USB clock/mode in the CFGCHIP2 register.
+	 * FYI:  CFGCHIP2 is 0x0000ef00 initially.
+	 */
+	cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB2.0 PHY reference clock is 24 MHz */
+	cfgchip2 &= ~CFGCHIP2_REFFREQ;
+	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
+
+	/*
+	 * Select internal reference clock for USB 2.0 PHY
+	 * and use it as a clock source for USB 1.1 PHY
+	 * (this is the default setting anyway).
+	 */
+	cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
+	cfgchip2 |=  CFGCHIP2_USB2PHYCLKMUX;
+
+	/*
+	 * We have to override VBUS/ID signals when MUSB is configured into the
+	 * host-only mode -- ID pin will float if no cable is connected, so the
+	 * controller won't be able to drive VBUS thinking that it's a B-device.
+	 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
+	 */
+	cfgchip2 &= ~CFGCHIP2_OTGMODE;
+#ifdef	CONFIG_USB_MUSB_HOST
+	cfgchip2 |=  CFGCHIP2_FORCE_HOST;
+#else
+	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+#endif
+
+	__raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB_REFCLKIN is not used. */
+	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
+	if (ret)
+		pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
+			   __func__, ret);
+	else {
+		/*
+		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
+		 * with the power on to power good time of 3 ms.
+		 */
+		ret = da8xx_register_usb20(1000, 3);
+		if (ret)
+			pr_warning("%s: USB 2.0 registration failed: %d\n",
+				   __func__, ret);
+	}
+
+	ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
+	if (ret) {
+		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
+			   __func__, ret);
+		return;
+	}
+
+	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "power control: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_output(ON_BD_USB_DRV, 0);
+
+	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "over-current indicator: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_input(ON_BD_USB_OVC);
+
+	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
+	if (ret)
+		pr_warning("%s: USB 1.1 registration failed: %d\n",
+			   __func__, ret);
+}
+
 static struct davinci_uart_config da830_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static const short da830_evm_mcasp1_pins[] = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
+	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
+	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
+	DA830_AXR1_11,
+	-1
+};
+
 static u8 da830_iis_serializer_direction[] = {
 	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
 	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+/*
+ * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
+ */
+static const short da830_evm_mmc_sd_pins[] = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
+	-1
+};
+
+#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
+
+static int da830_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA830_MMCSD_WP_PIN);
+}
+
+static struct davinci_mmc_config da830_evm_mmc_config = {
+	.get_ro			= da830_evm_mmc_get_ro,
+	.wires			= 4,
+	.max_freq		= 50000000,
+	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version		= MMC_CTLR_VERSION_2,
+};
+
+static inline void da830_evm_init_mmc(void)
+{
+	int ret;
+
+	ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+	if (ret) {
+		pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
+				ret);
+		return;
+	}
+
+	ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
+	if (ret) {
+		pr_warning("da830_evm_init: can not open GPIO %d\n",
+			   DA830_MMCSD_WP_PIN);
+		return;
+	}
+	gpio_direction_input(DA830_MMCSD_WP_PIN);
+
+	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
+	if (ret) {
+		pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
+				ret);
+		gpio_free(DA830_MMCSD_WP_PIN);
+	}
+}
+
+/*
+ * UI board NAND/NOR flashes only use 8-bit data bus.
+ */
+static const short da830_evm_emif25_pins[] = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
+	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
+	-1
+};
+
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC	1
+#else
+#define HAS_MMC	0
+#endif
+
+#ifdef CONFIG_DA830_UI_NAND
+static struct mtd_partition da830_evm_nand_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	[0] = {
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* bootloader params in the next sector */
+	[1] = {
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* kernel */
+	[2] = {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	/* file system */
+	[3] = {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+/* flash bbt decriptors */
+static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
+	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+			  NAND_BBT_WRITE | NAND_BBT_2BIT |
+			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs		= 2,
+	.len		= 4,
+	.veroffs	= 16,
+	.maxblocks	= 4,
+	.pattern	= da830_evm_nand_bbt_pattern
+};
+
+static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
+	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+			  NAND_BBT_WRITE | NAND_BBT_2BIT |
+			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs		= 2,
+	.len		= 4,
+	.veroffs	= 16,
+	.maxblocks	= 4,
+	.pattern	= da830_evm_nand_mirror_pattern
+};
+
+static struct davinci_nand_pdata da830_evm_nand_pdata = {
+	.parts		= da830_evm_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
+	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 4,
+	.options	= NAND_USE_FLASH_BBT,
+	.bbt_td		= &da830_evm_nand_bbt_main_descr,
+	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
+};
+
+static struct resource da830_evm_nand_resources[] = {
+	[0] = {		/* First memory resource is NAND I/O window */
+		.start	= DA830_EMIF25_ASYNC_DATA_CE3_BASE,
+		.end	= DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {		/* Second memory resource is AEMIF control registers */
+		.start	= DA830_EMIF25_CONTROL_BASE,
+		.end	= DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da830_evm_nand_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da830_evm_nand_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
+	.resource	= da830_evm_nand_resources,
+};
+
+static inline void da830_evm_init_nand(int mux_mode)
+{
+	int ret;
+
+	if (HAS_MMC) {
+		pr_warning("WARNING: both MMC/SD and NAND are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable MMC/SD for NAND support.\n");
+		return;
+	}
+
+	ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
+	if (ret)
+		pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
+				ret);
+
+	ret = platform_device_register(&da830_evm_nand_device);
+	if (ret)
+		pr_warning("da830_evm_init: NAND device not registered.\n");
+
+	gpio_direction_output(mux_mode, 1);
+}
+#else
+static inline void da830_evm_init_nand(int mux_mode) { }
+#endif
+
+#ifdef CONFIG_DA830_UI_LCD
+static inline void da830_evm_init_lcdc(int mux_mode)
+{
+	int ret;
+
+	ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
+	if (ret)
+		pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
+
+	gpio_direction_output(mux_mode, 0);
+}
+#else
+static inline void da830_evm_init_lcdc(int mux_mode) { }
+#endif
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
+		int gpio, unsigned ngpio, void *context)
+{
+	gpio_request(gpio + 6, "UI MUX_MODE");
+
+	/* Drive mux mode low to match the default without UI card */
+	gpio_direction_output(gpio + 6, 0);
+
+	da830_evm_init_lcdc(gpio + 6);
+
+	da830_evm_init_nand(gpio + 6);
+
+	return 0;
+}
+
+static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
+		unsigned ngpio, void *context)
+{
+	gpio_free(gpio + 6);
+	return 0;
+}
+
+static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
+	.gpio_base	= DAVINCI_N_GPIO,
+	.setup		= da830_evm_ui_expander_setup,
+	.teardown	= da830_evm_ui_expander_teardown,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
+	{
+		I2C_BOARD_INFO("pcf8574", 0x3f),
+		.platform_data	= &da830_evm_ui_expander_info,
+	},
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -94,6 +502,8 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
+	da830_evm_usb_init();
+
 	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
@@ -117,12 +527,18 @@ static __init void da830_evm_init(void)
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
-	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
 	if (ret)
 		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
 				ret);
 
-	da8xx_init_mcasp(1, &da830_evm_snd_data);
+	da8xx_register_mcasp(1, &da830_evm_snd_data);
+
+	da830_evm_init_mmc();
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void)
 	da830_init();
 }
 
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),

arch/arm/mach-davinci/board-da850-evm.c

@@ -12,36 +12,38 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
 
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
+
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "NOR filesystem",
@@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
+};
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
+static u32 ui_card_detected;
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_setup_nor_nand(void)
+{
+	int ret = 0;
+
+	if (ui_card_detected & !HAS_MMC) {
+		ret = da8xx_pinmux_setup(da850_nand_pins);
+		if (ret)
+			pr_warning("da850_evm_init: nand mux setup failed: "
+					"%d\n", ret);
+
+		ret = da8xx_pinmux_setup(da850_nor_pins);
+		if (ret)
+			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+		da850_evm_init_nor();
+
+		platform_add_devices(da850_evm_devices,
+					ARRAY_SIZE(da850_evm_devices));
+	}
+}
+
+#ifdef CONFIG_DA850_UI_RMII
+static inline void da850_evm_setup_emac_rmii(int rmii_sel)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	soc_info->emac_pdata->rmii_en = 1;
+	gpio_set_value(rmii_sel, 0);
+}
+#else
+static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
+#endif
+
+static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
+						unsigned ngpio, void *c)
+{
+	int sel_a, sel_b, sel_c, ret;
+
+	sel_a = gpio + 7;
+	sel_b = gpio + 6;
+	sel_c = gpio + 5;
+
+	ret = gpio_request(sel_a, "sel_a");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_a);
+		goto exp_setup_sela_fail;
+	}
+
+	ret = gpio_request(sel_b, "sel_b");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_b);
+		goto exp_setup_selb_fail;
+	}
+
+	ret = gpio_request(sel_c, "sel_c");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_c);
+		goto exp_setup_selc_fail;
+	}
+
+	/* deselect all functionalities */
+	gpio_direction_output(sel_a, 1);
+	gpio_direction_output(sel_b, 1);
+	gpio_direction_output(sel_c, 1);
+
+	ui_card_detected = 1;
+	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
+
+	da850_evm_setup_nor_nand();
+
+	da850_evm_setup_emac_rmii(sel_a);
+
+	return 0;
+
+exp_setup_selc_fail:
+	gpio_free(sel_b);
+exp_setup_selb_fail:
+	gpio_free(sel_a);
+exp_setup_sela_fail:
+	return ret;
+}
+
+static int da850_evm_ui_expander_teardown(struct i2c_client *client,
+					unsigned gpio, unsigned ngpio, void *c)
+{
+	/* deselect all functionalities */
+	gpio_set_value(gpio + 5, 1);
+	gpio_set_value(gpio + 6, 1);
+	gpio_set_value(gpio + 7, 1);
+
+	gpio_free(gpio + 5);
+	gpio_free(gpio + 6);
+	gpio_free(gpio + 7);
+
+	return 0;
+}
+
+static struct pca953x_platform_data da850_evm_ui_expander_info = {
+	.gpio_base	= DAVINCI_N_GPIO,
+	.setup		= da850_evm_ui_expander_setup,
+	.teardown	= da850_evm_ui_expander_teardown,
+};
+
 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	}
+	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x20),
+		.platform_data = &da850_evm_ui_expander_info,
+	},
 };
 
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
-static struct platform_device *da850_evm_devices[] __initdata = {
-	&da850_evm_nandflash_device,
-	&da850_evm_norflash_device,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -198,6 +334,8 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.get_ro		= da850_evm_mmc_get_ro,
 	.get_cd		= da850_evm_mmc_get_cd,
 	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.version	= MMC_CTLR_VERSION_2,
 };
 
@@ -233,56 +371,227 @@ static int da850_lcd_hw_init(void)
 	return 0;
 }
 
-#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
-#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+/* TPS65070 voltage regulator support */
 
-static void __init da850_evm_init_nor(void)
-{
-	void __iomem *aemif_addr;
+/* 3.3V */
+struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
+	{
+		.supply = "usb0_vdda33",
+	},
+	{
+		.supply = "usb1_vdda33",
+	},
+};
 
-	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+/* 3.3V or 1.8V */
+struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
+	{
+		.supply = "dvdd3318_a",
+	},
+	{
+		.supply = "dvdd3318_b",
+	},
+	{
+		.supply = "dvdd3318_c",
+	},
+};
 
-	/* Configure data bus width of CS2 to 16 bit */
-	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
-		DA8XX_AEMIF_ASIZE_16BIT,
-		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+/* 1.2V */
+struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
+	{
+		.supply = "cvdd",
+	},
+};
 
-	iounmap(aemif_addr);
-}
+/* 1.8V LDO */
+struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
+	{
+		.supply = "sata_vddr",
+	},
+	{
+		.supply = "usb0_vdda18",
+	},
+	{
+		.supply = "usb1_vdda18",
+	},
+	{
+		.supply = "ddr_dvdd18",
+	},
+};
 
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-#define HAS_NOR 1
-#else
-#define HAS_NOR 0
-#endif
+/* 1.2V LDO */
+struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
+	{
+		.supply = "sata_vdd",
+	},
+	{
+		.supply = "pll0_vdda",
+	},
+	{
+		.supply = "pll1_vdda",
+	},
+	{
+		.supply = "usbs_cvdd",
+	},
+	{
+		.supply = "vddarnwa1",
+	},
+};
 
-#if defined(CONFIG_MMC_DAVINCI) || \
-    defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC 1
-#else
-#define HAS_MMC 0
-#endif
+struct regulator_init_data tps65070_regulator_data[] = {
+	/* dcdc1 */
+	{
+		.constraints = {
+			.min_uV = 3150000,
+			.max_uV = 3450000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
+		.consumer_supplies = tps65070_dcdc1_consumers,
+	},
 
-static __init void da850_evm_init(void)
+	/* dcdc2 */
+	{
+		.constraints = {
+			.min_uV = 1710000,
+			.max_uV = 3450000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
+		.consumer_supplies = tps65070_dcdc2_consumers,
+	},
+
+	/* dcdc3 */
+	{
+		.constraints = {
+			.min_uV = 950000,
+			.max_uV = 1320000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
+		.consumer_supplies = tps65070_dcdc3_consumers,
+	},
+
+	/* ldo1 */
+	{
+		.constraints = {
+			.min_uV = 1710000,
+			.max_uV = 1890000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
+		.consumer_supplies = tps65070_ldo1_consumers,
+	},
+
+	/* ldo2 */
+	{
+		.constraints = {
+			.min_uV = 1140000,
+			.max_uV = 1320000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
+		.consumer_supplies = tps65070_ldo2_consumers,
+	},
+};
+
+static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+	{
+		I2C_BOARD_INFO("tps6507x", 0x48),
+		.platform_data = &tps65070_regulator_data[0],
+	},
+};
+
+static int __init pmic_tps65070_init(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	return i2c_register_board_info(1, da850evm_tps65070_info,
+					ARRAY_SIZE(da850evm_tps65070_info));
+}
+
+static const short da850_evm_lcdc_pins[] = {
+	DA850_GPIO2_8, DA850_GPIO2_15,
+	-1
+};
+
+static int __init da850_evm_config_emac(void)
+{
+	void __iomem *cfg_chip3_base;
 	int ret;
+	u32 val;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+
+	if (!machine_is_davinci_da850_evm())
+		return 0;
+
+	cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+
+	val = __raw_readl(cfg_chip3_base);
+
+	if (rmii_en) {
+		val |= BIT(8);
+		ret = da8xx_pinmux_setup(da850_rmii_pins);
+		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
+							" functional\n");
+	} else {
+		val &= ~BIT(8);
+		ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
+							" functional\n");
+	}
 
-	ret = da8xx_pinmux_setup(da850_nand_pins);
 	if (ret)
-		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+		pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_nor_pins);
+	/* configure the CFGCHIP3 register for RMII or MII */
+	__raw_writel(val, cfg_chip3_base);
+
+	ret = davinci_cfg_reg(DA850_GPIO2_6);
 	if (ret)
-		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+		pr_warning("da850_evm_init:GPIO(2,6) mux setup "
+							"failed\n");
+
+	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
+	if (ret) {
+		pr_warning("Cannot open GPIO %d\n",
+					DA850_MII_MDIO_CLKEN_PIN);
+		return ret;
+	}
+
+	/* Enable/Disable MII MDIO clock */
+	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
+
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
 				ret);
 
-	da850_evm_init_nor();
+	return 0;
+}
+device_initcall(da850_evm_config_emac);
+
+static __init void da850_evm_init(void)
+{
+	int ret;
 
-	platform_add_devices(da850_evm_devices,
-				ARRAY_SIZE(da850_evm_devices));
+	ret = pmic_tps65070_init();
+	if (ret)
+		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
+				ret);
 
 	ret = da8xx_register_edma();
 	if (ret)
@@ -299,19 +608,6 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
-	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
-	soc_info->emac_pdata->rmii_en = 0;
-
-	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
-	if (ret)
-		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("da850_evm_init: emac registration failed: %d\n",
-				ret);
 
 	ret = da8xx_register_watchdog();
 	if (ret)
@@ -319,11 +615,6 @@ static __init void da850_evm_init(void)
 				ret);
 
 	if (HAS_MMC) {
-		if (HAS_NOR)
-			pr_warning("WARNING: both NOR Flash and MMC/SD are "
-				"enabled, but they share AEMIF pins.\n"
-				"\tDisable one of them.\n");
-
 		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
@@ -365,22 +656,42 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
 
-	da8xx_init_mcasp(0, &da850_evm_snd_data);
+	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
 	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
 	if (ret)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
 
+	/* Handle board specific muxing for LCD here */
+	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+	if (ret)
+		pr_warning("da850_evm_init: evm specific lcd mux setup "
+				"failed: %d\n",	ret);
+
 	ret = da850_lcd_hw_init();
 	if (ret)
 		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
 				ret);
 
-	ret = da8xx_register_lcdc();
+	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
 	if (ret)
 		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
 				ret);
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+
+	ret = da850_register_cpufreq();
+	if (ret)
+		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_cpuidle();
+	if (ret)
+		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/arm/mach-davinci/board-dm355-evm.c

@@ -9,15 +9,13 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
@@ -25,20 +23,15 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
 #include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.ecc_mode		= NAND_ECC_HW,
 	.options		= NAND_USE_FLASH_BBT,
+	.ecc_bits		= 4,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -344,7 +338,7 @@ static __init void dm355_evm_init(void)
 	gpio_request(2, "usb_id_toggle");
 	gpio_direction_output(2, USB_ID_VALUE);
 	/* irlml6401 switches over 1A in under 8 msec */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -8,34 +8,27 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
 #include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void)
 	gpio_request(2, "usb_id_toggle");
 	gpio_direction_output(2, USB_ID_VALUE);
 	/* irlml6401 switches over 1A in under 8 msec */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	davinci_setup_mmc(0, &dm355leopard_mmc_config);
 	davinci_setup_mmc(1, &dm355leopard_mmc_config);

arch/arm/mach-davinci/board-dm365-evm.c

@@ -13,9 +13,8 @@
  * GNU General Public License for more details.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
@@ -24,20 +23,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
-#include <asm/setup.h>
+#include <linux/input.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
+
 #include <mach/mux.h>
-#include <mach/hardware.h>
 #include <mach/dm365.h>
-#include <mach/psc.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
-
+#include <mach/keyscan.h>
 
 static inline int have_imager(void)
 {
@@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
 	.options		= NAND_USE_FLASH_BBT,
+	.ecc_bits		= 4,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static struct snd_platform_data dm365_evm_snd_data;
+
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -188,6 +192,38 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+#ifdef CONFIG_KEYBOARD_DAVINCI
+static unsigned short dm365evm_keymap[] = {
+	KEY_KP2,
+	KEY_LEFT,
+	KEY_EXIT,
+	KEY_DOWN,
+	KEY_ENTER,
+	KEY_UP,
+	KEY_KP1,
+	KEY_RIGHT,
+	KEY_MENU,
+	KEY_RECORD,
+	KEY_REWIND,
+	KEY_KPMINUS,
+	KEY_STOP,
+	KEY_FASTFORWARD,
+	KEY_KPPLUS,
+	KEY_PLAYPAUSE,
+	0
+};
+
+static struct davinci_ks_platform_data dm365evm_ks_data = {
+	.keymap		= dm365evm_keymap,
+	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
+	.rep		= 1,
+	/* Scan period = strobe + interval */
+	.strobe		= 0x5,
+	.interval	= 0x2,
+	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
+};
+#endif
+
 static int cpld_mmc_get_cd(int module)
 {
 	if (!cpld)
@@ -472,6 +508,13 @@ static __init void dm365_evm_init(void)
 
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
+
+	dm365_init_asp(&dm365_evm_snd_data);
+	dm365_init_rtc();
+
+#ifdef CONFIG_KEYBOARD_DAVINCI
+	dm365_init_ks(&dm365evm_ks_data);
+#endif
 }
 
 static __init void dm365_evm_irq_init(void)

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -9,45 +9,34 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
 
 #include <media/tvp514x.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/psc.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/usb.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -477,7 +466,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	/* irlml6401 switches over 1A, in under 8 msec;
 	 * now it can be managed by nDRV_VBUS ...
 	 */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	return 0;
 }

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -17,38 +17,28 @@
  **************************************************************************/
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
-#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/etherdevice.h>
 
 #include <media/tvp514x.h>
 
-#include <asm/setup.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/dm646x.h>
 #include <mach/common.h>
-#include <mach/psc.h>
 #include <mach/serial.h>
 #include <mach/i2c.h>
-#include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/nand.h>
 
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
@@ -57,6 +47,11 @@
 #define HAS_ATA 0
 #endif
 
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x20008000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x42000000
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
 #define DM646X_EVM_ATA_PWD		BIT(1)
@@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
+ * and U-Boot environment this avoids dependency on any particular combination
+ * of UBL, U-Boot or flashing tools etc.
+ */
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL, U-Boot with environment */
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_cle 		= 0x80000,
+	.mask_ale 		= 0x40000,
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= 0,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
 /* CPLD Register 0 Client: used for I/O Control */
 static int cpld_reg0_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
@@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS4", .active_low = 1, },
 };
 
-static __initconst struct gpio_led_platform_data evm_led_data = {
+static const struct gpio_led_platform_data evm_led_data = {
 	.num_leds = ARRAY_SIZE(evm_leds),
 	.leds     = evm_leds,
 };
@@ -647,6 +699,8 @@ static __init void evm_init(void)
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
+	platform_device_register(&davinci_nand_device);
+
 	if (HAS_ATA)
 		dm646x_init_ide();
 

arch/arm/mach-davinci/board-neuros-osd2.c

+/*
+ * Neuros Technologies OSD2 board support
+ *
+ * Modified from original 644X-EVM board support.
+ * 2008 (c) Neuros Technology, LLC.
+ * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
+ * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
+ *
+ * The Neuros OSD 2.0 is the hardware component of the Neuros Open
+ * Internet Television Platform. Hardware is very close to TI
+ * DM644X-EVM board. It has:
+ * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
+ * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
+ * 	Additionaly realtime clock, IR remote control receiver,
+ * 	IR Blaster based on MSP430 (firmware although is different
+ * 	from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
+ * 	with PATA interface, two muxed red-green leds.
+ *
+ * For more information please refer to
+ * 		http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dm644x.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/usb.h>
+
+#define NEUROS_OSD2_PHY_MASK		0x2
+#define NEUROS_OSD2_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
+#define DAVINCI_CFC_ATA_BASE		 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE	 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+#define LXT971_PHY_ID			0x001378e2
+#define LXT971_PHY_MASK			0xfffffff0
+
+#define	NTOSD2_AUDIOSOC_I2C_ADDR	0x18
+#define	NTOSD2_MSP430_I2C_ADDR		0x59
+#define	NTOSD2_MSP430_IRQ		2
+
+/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
+ * 2048 blocks in the device, 64 pages per block, 2048 bytes per
+ * page.
+ */
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		/* Kernel */
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		/* File System */
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* A few blocks at end hold a flash Bad Block Table. */
+};
+
+static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
+	.parts		= davinci_ntosd2_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_ntosd2_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_ntosd2_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_ntosd2_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
+	.resource	= davinci_ntosd2_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+	.name		= "davincifb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &davinci_fb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources = 0,
+};
+
+static struct resource ide_resources[] = {
+	{
+		.start		= DAVINCI_CFC_ATA_BASE,
+		.end		= DAVINCI_CFC_ATA_BASE + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_IDE,
+		.end		= IRQ_IDE,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name		= "palm_bk3710",
+	.id		= -1,
+	.resource	= ide_resources,
+	.num_resources	= ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct snd_platform_data dm644x_ntosd2_snd_data;
+
+static struct gpio_led ntosd2_leds[] = {
+	{ .name = "led1_green", .gpio = GPIO(10), },
+	{ .name = "led1_red",   .gpio = GPIO(11), },
+	{ .name = "led2_green", .gpio = GPIO(12), },
+	{ .name = "led2_red",   .gpio = GPIO(13), },
+};
+
+static struct gpio_led_platform_data ntosd2_leds_data = {
+	.num_leds	= ARRAY_SIZE(ntosd2_leds),
+	.leds		= ntosd2_leds,
+};
+
+static struct platform_device ntosd2_leds_dev = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data 		= &ntosd2_leds_data,
+	},
+};
+
+
+static struct platform_device *davinci_ntosd2_devices[] __initdata = {
+	&davinci_fb_device,
+	&ntosd2_leds_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_ntosd2_map_io(void)
+{
+	dm644x_init();
+}
+
+/*
+ I2C initialization
+*/
+static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
+};
+
+static	int ntosd2_init_i2c(void)
+{
+	int	status;
+
+	davinci_init_i2c(&ntosd2_i2c_pdata);
+	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
+	if (status == 0) {
+		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
+		if (status == 0) {
+			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
+			if (status > 0) {
+				ntosd2_i2c_info[0].irq = status;
+				i2c_register_board_info(1,
+					ntosd2_i2c_info,
+					ARRAY_SIZE(ntosd2_i2c_info));
+			}
+		}
+	}
+	return status;
+}
+
+static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+	defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+	defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
+#endif
+
+static __init void davinci_ntosd2_init(void)
+{
+	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int	status;
+
+	aemif_clk = clk_get(NULL, "aemif");
+	clk_enable(aemif_clk);
+
+	if (HAS_ATA) {
+		if (HAS_NAND)
+			pr_warning("WARNING: both IDE and Flash are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable IDE for NAND/NOR support.\n");
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+		platform_device_register(&ide_dev);
+	} else if (HAS_NAND) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+		/* only one device will be jumpered and detected */
+		if (HAS_NAND)
+			platform_device_register(
+					&davinci_ntosd2_nandflash_device);
+	}
+
+	platform_add_devices(davinci_ntosd2_devices,
+				ARRAY_SIZE(davinci_ntosd2_devices));
+
+	/* Initialize I2C interface specific for this board */
+	status = ntosd2_init_i2c();
+	if (status < 0)
+		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
+						"	 %d\n", status);
+
+	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_ntosd2_snd_data);
+
+	soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
+
+	davinci_setup_usb(1000, 8);
+	/*
+	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
+	 * The AEAWx are five new AEAW pins that can be muxed by separately.
+	 * They are a bitmask for GPIO management. According TI
+	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+	 * gpio(10,11,12,13) for leds any combination of bits works except
+	 * four last. So we are to reset all five.
+	 */
+	davinci_cfg_reg(DM644X_AEAW0);
+	davinci_cfg_reg(DM644X_AEAW1);
+	davinci_cfg_reg(DM644X_AEAW2);
+	davinci_cfg_reg(DM644X_AEAW3);
+	davinci_cfg_reg(DM644X_AEAW4);
+
+	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
+}
+
+static __init void davinci_ntosd2_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
+	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
+	.map_io		 = davinci_ntosd2_map_io,
+	.init_irq	= davinci_ntosd2_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine = davinci_ntosd2_init,
+MACHINE_END

arch/arm/mach-davinci/board-sffsdr.c

@@ -23,35 +23,24 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
-
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
 #include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/usb.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct emac_platform_data sffsdr_emac_pdata = {
-	.phy_mask	= SFFSDR_PHY_MASK,
-	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
-};
-
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (64*1024) / 8,
 	.page_size	= 32,
@@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void)
 	davinci_serial_init(&uart_config);
 	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
-	setup_usb(0, 0); /* We support only peripheral mode. */
+	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
 	/* mux VLYNQ pins */
 	davinci_cfg_reg(DM644X_VLYNQEN);

arch/arm/mach-davinci/clock.c

@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 
@@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
-				clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
-				clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -99,20 +97,74 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	if (clk->round_rate)
+		return clk->round_rate(clk, rate);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
+/* Propagate rate to children */
+static void propagate_rate(struct clk *root)
+{
+	struct clk *clk;
+
+	list_for_each_entry(clk, &root->children, childnode) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned long flags;
+	int ret = -EINVAL;
+
 	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
+		return ret;
 
-	/* changing the clk rate is not supported */
-	return -EINVAL;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	if (ret == 0) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/* Cannot change parent on enabled clock */
+	if (WARN_ON(clk->usecount))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	clk->parent = parent;
+	list_del_init(&clk->childnode);
+	list_add(&clk->childnode, &clk->parent->children);
+	mutex_unlock(&clocks_mutex);
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->recalc)
+		clk->rate = clk->recalc(clk);
+	propagate_rate(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -123,16 +175,24 @@ int clk_register(struct clk *clk)
 			clk->name, clk->parent->name))
 		return -EINVAL;
 
+	INIT_LIST_HEAD(&clk->children);
+
 	mutex_lock(&clocks_mutex);
 	list_add_tail(&clk->node, &clocks);
+	if (clk->parent)
+		list_add_tail(&clk->childnode, &clk->parent->children);
 	mutex_unlock(&clocks_mutex);
 
 	/* If rate is already set, use it */
 	if (clk->rate)
 		return 0;
 
+	/* Else, see if there is a way to calculate it */
+	if (clk->recalc)
+		clk->rate = clk->recalc(clk);
+
 	/* Otherwise, default to parent rate */
-	if (clk->parent)
+	else if (clk->parent)
 		clk->rate = clk->parent->rate;
 
 	return 0;
@@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk)
 
 	mutex_lock(&clocks_mutex);
 	list_del(&clk->node);
+	list_del(&clk->childnode);
 	mutex_unlock(&clocks_mutex);
 }
 EXPORT_SYMBOL(clk_unregister);
@@ -166,11 +227,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
@@ -179,50 +240,62 @@ static int __init clk_disable_unused(void)
 late_initcall(clk_disable_unused);
 #endif
 
-static void clk_sysclk_recalc(struct clk *clk)
+static unsigned long clk_sysclk_recalc(struct clk *clk)
 {
 	u32 v, plldiv;
 	struct pll_data *pll;
+	unsigned long rate = clk->rate;
 
 	/* If this is the PLL base clock, no more calculations needed */
 	if (clk->pll_data)
-		return;
+		return rate;
 
 	if (WARN_ON(!clk->parent))
-		return;
+		return rate;
 
-	clk->rate = clk->parent->rate;
+	rate = clk->parent->rate;
 
 	/* Otherwise, the parent must be a PLL */
 	if (WARN_ON(!clk->parent->pll_data))
-		return;
+		return rate;
 
 	pll = clk->parent->pll_data;
 
 	/* If pre-PLL, source clock is before the multiplier and divider(s) */
 	if (clk->flags & PRE_PLL)
-		clk->rate = pll->input_rate;
+		rate = pll->input_rate;
 
 	if (!clk->div_reg)
-		return;
+		return rate;
 
 	v = __raw_readl(pll->base + clk->div_reg);
 	if (v & PLLDIV_EN) {
 		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
 		if (plldiv)
-			clk->rate /= plldiv;
+			rate /= plldiv;
 	}
+
+	return rate;
+}
+
+static unsigned long clk_leafclk_recalc(struct clk *clk)
+{
+	if (WARN_ON(!clk->parent))
+		return clk->rate;
+
+	return clk->parent->rate;
 }
 
-static void __init clk_pll_init(struct clk *clk)
+static unsigned long clk_pllclk_recalc(struct clk *clk)
 {
 	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
 	u8 bypass;
 	struct pll_data *pll = clk->pll_data;
+	unsigned long rate = clk->rate;
 
 	pll->base = IO_ADDRESS(pll->phys_base);
 	ctrl = __raw_readl(pll->base + PLLCTL);
-	clk->rate = pll->input_rate = clk->parent->rate;
+	rate = pll->input_rate = clk->parent->rate;
 
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
@@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk)
 	}
 
 	if (!bypass) {
-		clk->rate /= prediv;
-		clk->rate *= mult;
-		clk->rate /= postdiv;
+		rate /= prediv;
+		rate *= mult;
+		rate /= postdiv;
 	}
 
 	pr_debug("PLL%d: input = %lu MHz [ ",
@@ -270,8 +343,90 @@ static void __init clk_pll_init(struct clk *clk)
 		pr_debug("* %d ", mult);
 	if (postdiv > 1)
 		pr_debug("/ %d ", postdiv);
-	pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+	pr_debug("] --> %lu MHz output.\n", rate / 1000000);
+
+	return rate;
+}
+
+/**
+ * davinci_set_pllrate - set the output rate of a given PLL.
+ *
+ * Note: Currently tested to work with OMAP-L138 only.
+ *
+ * @pll: pll whose rate needs to be changed.
+ * @prediv: The pre divider value. Passing 0 disables the pre-divider.
+ * @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
+ * @postdiv: The post divider value. Passing 0 disables the post-divider.
+ */
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+					unsigned int mult, unsigned int postdiv)
+{
+	u32 ctrl;
+	unsigned int locktime;
+
+	if (pll->base == NULL)
+		return -EINVAL;
+
+	/*
+	 *  PLL lock time required per OMAP-L138 datasheet is
+	 * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
+	 * as 4 and OSCIN cycle as 25 MHz.
+	 */
+	if (prediv) {
+		locktime = ((2000 * prediv) / 100);
+		prediv = (prediv - 1) | PLLDIV_EN;
+	} else {
+		locktime = 20;
+	}
+	if (postdiv)
+		postdiv = (postdiv - 1) | PLLDIV_EN;
+	if (mult)
+		mult = mult - 1;
+
+	ctrl = __raw_readl(pll->base + PLLCTL);
+
+	/* Switch the PLL to bypass mode */
+	ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	/*
+	 * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
+	 * to bypass mode. Delay of 1us ensures we are good for all > 4MHz
+	 * OSCIN/CLKIN inputs. Typically the input is ~25MHz.
+	 */
+	udelay(1);
+
+	/* Reset and enable PLL */
+	ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	if (pll->flags & PLL_HAS_PREDIV)
+		__raw_writel(prediv, pll->base + PREDIV);
+
+	__raw_writel(mult, pll->base + PLLM);
+
+	if (pll->flags & PLL_HAS_POSTDIV)
+		__raw_writel(postdiv, pll->base + POSTDIV);
+
+	/*
+	 * Wait for PLL to reset properly, OMAP-L138 datasheet says
+	 * 'min' time = 125ns
+	 */
+	udelay(1);
+
+	/* Bring PLL out of reset */
+	ctrl |= PLLCTL_PLLRST;
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	udelay(locktime);
+
+	/* Remove PLL from bypass mode */
+	ctrl |= PLLCTL_PLLEN;
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	return 0;
 }
+EXPORT_SYMBOL(davinci_set_pllrate);
 
 int __init davinci_clk_init(struct davinci_clk *clocks)
   {
@@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks)
 	for (c = clocks; c->lk.clk; c++) {
 		clk = c->lk.clk;
 
-		if (clk->pll_data)
-			clk_pll_init(clk);
+		if (!clk->recalc) {
+
+			/* Check if clock is a PLL */
+			if (clk->pll_data)
+				clk->recalc = clk_pllclk_recalc;
+
+			/* Else, if it is a PLL-derived clock */
+			else if (clk->flags & CLK_PLL)
+				clk->recalc = clk_sysclk_recalc;
+
+			/* Otherwise, it is a leaf clock (PSC clock) */
+			else if (clk->parent)
+				clk->recalc = clk_leafclk_recalc;
+		}
 
-		/* Calculate rates for PLL-derived clocks */
-		else if (clk->flags & CLK_PLL)
-			clk_sysclk_recalc(clk);
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
 
 		if (clk->lpsc)
 			clk->flags |= CLK_PSC;
@@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
 	/* REVISIT show device associations too */
 
 	/* cost is now small, but not linear... */
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->parent == parent)
-			dump_clock(s, nest + NEST_DELTA, clk);
+	list_for_each_entry(clk, &parent->children, childnode) {
+		dump_clock(s, nest + NEST_DELTA, clk);
 	}
 }
 

arch/arm/mach-davinci/clock.h

@@ -22,6 +22,10 @@
 /* PLL/Reset register offsets */
 #define PLLCTL          0x100
 #define PLLCTL_PLLEN    BIT(0)
+#define PLLCTL_PLLPWRDN	BIT(1)
+#define PLLCTL_PLLRST	BIT(3)
+#define PLLCTL_PLLDIS	BIT(4)
+#define PLLCTL_PLLENSRC	BIT(5)
 #define PLLCTL_CLKMODE  BIT(8)
 
 #define PLLM		0x110
@@ -65,15 +69,20 @@ struct clk {
 	const char		*name;
 	unsigned long		rate;
 	u8			usecount;
-	u8			flags;
 	u8			lpsc;
-	u8			psc_ctlr;
+	u8			gpsc;
+	u32			flags;
 	struct clk              *parent;
+	struct list_head	children; 	/* list of children */
+	struct list_head	childnode;	/* parent's child list node */
 	struct pll_data         *pll_data;
 	u32                     div_reg;
+	unsigned long (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *clk, unsigned long rate);
+	int (*round_rate) (struct clk *clk, unsigned long rate);
 };
 
-/* Clock flags */
+/* Clock flags: SoC-specific flags start at BIT(16) */
 #define ALWAYS_ENABLED		BIT(1)
 #define CLK_PSC                 BIT(2)
 #define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
@@ -94,6 +103,8 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+				unsigned int mult, unsigned int postdiv);
 
 extern struct platform_device davinci_wdt_device;
 

arch/arm/mach-davinci/common.c

@@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	dip = davinci_get_id(davinci_soc_info.jtag_id);
 	if (!dip) {
 		ret = -EINVAL;
+		pr_err("Unknown DaVinci JTAG ID 0x%x\n",
+						davinci_soc_info.jtag_id);
 		goto err;
 	}
 
@@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	return;
 
 err:
-	pr_err("davinci_common_init: SoC Initialization failed\n");
+	panic("davinci_common_init: SoC Initialization failed\n");
 }

arch/arm/mach-davinci/cp_intc.c

@@ -10,9 +10,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 

arch/arm/mach-davinci/cpufreq.c

+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+#include "clock.h"
+
+struct davinci_cpufreq {
+	struct device *dev;
+	struct clk *armclk;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_verify_speed(struct cpufreq_policy *policy)
+{
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+	struct clk *armclk = cpufreq.armclk;
+
+	if (freq_table)
+		return cpufreq_frequency_table_verify(policy, freq_table);
+
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+
+	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
+	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+						policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static unsigned int davinci_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+
+	return clk_get_rate(cpufreq.armclk) / 1000;
+}
+
+static int davinci_target(struct cpufreq_policy *policy,
+				unsigned int target_freq, unsigned int relation)
+{
+	int ret = 0;
+	unsigned int idx;
+	struct cpufreq_freqs freqs;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct clk *armclk = cpufreq.armclk;
+
+	/*
+	 * Ensure desired rate is within allowed range.  Some govenors
+	 * (ondemand) will just pass target_freq=0 to get the minimum.
+	 */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
+	freqs.old = davinci_getspeed(0);
+	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
+	freqs.cpu = 0;
+
+	if (freqs.old == freqs.new)
+		return ret;
+
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
+			dev_driver_string(cpufreq.dev),
+			"transition: %u --> %u\n", freqs.old, freqs.new);
+
+	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
+						freqs.new, relation, &idx);
+	if (ret)
+		return -EINVAL;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* if moving to higher frequency, up the voltage beforehand */
+	if (pdata->set_voltage && freqs.new > freqs.old)
+		pdata->set_voltage(idx);
+
+	ret = clk_set_rate(armclk, idx);
+
+	/* if moving to lower freq, lower the voltage after lowering freq */
+	if (pdata->set_voltage && freqs.new < freqs.old)
+		pdata->set_voltage(idx);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Finish platform specific initialization */
+	if (pdata->init) {
+		result = pdata->init();
+		if (result)
+			return result;
+	}
+
+	policy->cur = policy->min = policy->max = davinci_getspeed(0);
+
+	if (freq_table) {
+		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		if (!result)
+			cpufreq_frequency_table_get_attr(freq_table,
+							policy->cpu);
+	} else {
+		policy->cpuinfo.min_freq = policy->min;
+		policy->cpuinfo.max_freq = policy->max;
+	}
+
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+	policy->cur = davinci_getspeed(0);
+
+	/*
+	 * Time measurement across the target() function yields ~1500-1800us
+	 * time taken with no drivers on notification list.
+	 * Setting the latency to 2000 us to accomodate addition of drivers
+	 * to pre/post change notification list.
+	 */
+	policy->cpuinfo.transition_latency = 2000 * 1000;
+	return 0;
+}
+
+static int davinci_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *davinci_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver davinci_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= davinci_verify_speed,
+	.target		= davinci_target,
+	.get		= davinci_getspeed,
+	.init		= davinci_cpu_init,
+	.exit		= davinci_cpu_exit,
+	.name		= "davinci",
+	.attr		= davinci_cpufreq_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+	if (!pdata->freq_table)
+		return -EINVAL;
+
+	cpufreq.dev = &pdev->dev;
+
+	cpufreq.armclk = clk_get(NULL, "arm");
+	if (IS_ERR(cpufreq.armclk)) {
+		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+		return PTR_ERR(cpufreq.armclk);
+	}
+
+	return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+	clk_put(cpufreq.armclk);
+
+	return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+	.driver = {
+		.name	 = "cpufreq-davinci",
+		.owner	 = THIS_MODULE,
+	},
+	.remove = __exit_p(davinci_cpufreq_remove),
+};
+
+static int __init davinci_cpufreq_init(void)
+{
+	return platform_driver_probe(&davinci_cpufreq_driver,
+							davinci_cpufreq_probe);
+}
+late_initcall(davinci_cpufreq_init);
+

arch/arm/mach-davinci/devices.c

@@ -9,15 +9,11 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 
-#include <asm/mach/map.h>
-
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
@@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
 			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
 							SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+			mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
 		} else
 			break;