cpufreq: retire the Integrator cpufreq driver

After switching the core module clocks controlling the Integrator
clock frequencies to the common clock framework, defining the
operating points in the device tree, and activating the generic
DT-based CPUfreq driver, we can retire the old Integrator
cpufreq driver.
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/cpufreq/Kconfig.arm

@@ -60,14 +60,6 @@ config ARM_IMX6Q_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-	  If in doubt, say Y.
-
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool MACH_KIRKWOOD
 	help

drivers/cpufreq/Makefile

@@ -56,7 +56,6 @@ obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
-obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o

drivers/cpufreq/integrator-cpufreq.c

-/*
- *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * CPU support functions
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-static void __iomem *cm_base;
-/* The cpufreq driver only use the OSC register */
-#define INTEGRATOR_HDR_OSC_OFFSET       0x08
-#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
-
-static struct cpufreq_driver integrator_driver;
-
-static const struct icst_params lclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 8,
-	.vd_max		= 132,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static const struct icst_params cclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 160,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-/*
- * Validate the speed policy.
- */
-static int integrator_verify_policy(struct cpufreq_policy *policy)
-{
-	struct icst_vco vco;
-
-	cpufreq_verify_within_cpu_limits(policy);
-
-	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
-	policy->max = icst_hz(&cclk_params, vco) / 1000;
-
-	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
-	policy->min = icst_hz(&cclk_params, vco) / 1000;
-
-	cpufreq_verify_within_cpu_limits(policy);
-	return 0;
-}
-
-
-static int integrator_set_target(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
-{
-	cpumask_t cpus_allowed;
-	int cpu = policy->cpu;
-	struct icst_vco vco;
-	struct cpufreq_freqs freqs;
-	u_int cm_osc;
-
-	/*
-	 * Save this threads cpus_allowed mask.
-	 */
-	cpus_allowed = current->cpus_allowed;
-
-	/*
-	 * Bind to the specified CPU.  When this call returns,
-	 * we should be running on the right CPU.
-	 */
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* get current setting */
-	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-
-	if (machine_is_integrator())
-		vco.s = (cm_osc >> 8) & 7;
-	else if (machine_is_cintegrator())
-		vco.s = 1;
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-	freqs.old = icst_hz(&cclk_params, vco) / 1000;
-
-	/* icst_hz_to_vco rounds down -- so we need the next
-	 * larger freq in case of CPUFREQ_RELATION_L.
-	 */
-	if (relation == CPUFREQ_RELATION_L)
-		target_freq += 999;
-	if (target_freq > policy->max)
-		target_freq = policy->max;
-	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
-	freqs.new = icst_hz(&cclk_params, vco) / 1000;
-
-	if (freqs.old == freqs.new) {
-		set_cpus_allowed_ptr(current, &cpus_allowed);
-		return 0;
-	}
-
-	cpufreq_freq_transition_begin(policy, &freqs);
-
-	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-
-	if (machine_is_integrator()) {
-		cm_osc &= 0xfffff800;
-		cm_osc |= vco.s << 8;
-	} else if (machine_is_cintegrator()) {
-		cm_osc &= 0xffffff00;
-	}
-	cm_osc |= vco.v;
-
-	__raw_writel(0xa05f, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
-	__raw_writel(cm_osc, cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-	__raw_writel(0, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
-
-	/*
-	 * Restore the CPUs allowed mask.
-	 */
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	cpufreq_freq_transition_end(policy, &freqs, 0);
-
-	return 0;
-}
-
-static unsigned int integrator_get(unsigned int cpu)
-{
-	cpumask_t cpus_allowed;
-	unsigned int current_freq;
-	u_int cm_osc;
-	struct icst_vco vco;
-
-	cpus_allowed = current->cpus_allowed;
-
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* detect memory etc. */
-	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-
-	if (machine_is_integrator())
-		vco.s = (cm_osc >> 8) & 7;
-	else
-		vco.s = 1;
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-
-	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	return current_freq;
-}
-
-static int integrator_cpufreq_init(struct cpufreq_policy *policy)
-{
-
-	/* set default policy and cpuinfo */
-	policy->max = policy->cpuinfo.max_freq = 160000;
-	policy->min = policy->cpuinfo.min_freq = 12000;
-	policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */
-
-	return 0;
-}
-
-static struct cpufreq_driver integrator_driver = {
-	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify		= integrator_verify_policy,
-	.target		= integrator_set_target,
-	.get		= integrator_get,
-	.init		= integrator_cpufreq_init,
-	.name		= "integrator",
-};
-
-static int __init integrator_cpufreq_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	cm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!cm_base)
-		return -ENODEV;
-
-	return cpufreq_register_driver(&integrator_driver);
-}
-
-static int __exit integrator_cpufreq_remove(struct platform_device *pdev)
-{
-	return cpufreq_unregister_driver(&integrator_driver);
-}
-
-static const struct of_device_id integrator_cpufreq_match[] = {
-	{ .compatible = "arm,core-module-integrator"},
-	{ },
-};
-
-MODULE_DEVICE_TABLE(of, integrator_cpufreq_match);
-
-static struct platform_driver integrator_cpufreq_driver = {
-	.driver = {
-		.name = "integrator-cpufreq",
-		.of_match_table = integrator_cpufreq_match,
-	},
-	.remove = __exit_p(integrator_cpufreq_remove),
-};
-
-module_platform_driver_probe(integrator_cpufreq_driver,
-			     integrator_cpufreq_probe);
-
-MODULE_AUTHOR("Russell M. King");
-MODULE_DESCRIPTION("cpufreq driver for ARM Integrator CPUs");
-MODULE_LICENSE("GPL");