Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 "Major changes:

   - lots of devicetree additions for existing drivers.  I tried hard to
     make sure the bindings are proper.  In more complicated cases, I
     requested acks from people having more experience with them than
     me.  That took a bit of extra time and also some time went into
     discussions with developers about what bindings are and what not.
     I have the feeling that the workflow with bindings should be
     improved to scale better.  I will spend some more thought on
     this...

   - i2c-muxes are succesfully used meanwhile, so we dropped
     EXPERIMENTAL for them and renamed the drivers to a standard pattern
     to match the rest of the subsystem.  They can also be used with
     devicetree now.

   - ixp2000 was removed since the whole platform goes away.

   - cleanups (strlcpy instead of strcpy, NULL instead of 0)

   - The rest is typical driver fixes I assume.

  All patches have been in linux-next at least since v3.4-rc6."

Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
  i2c: davinci: Free requested IRQ in remove
  i2c: ocores: register OF i2c devices
  i2c: tegra: notify transfer-complete after clearing status.
  I2C: xiic: Add OF binding support
  i2c: Rename last mux driver to standard pattern
  i2c: tegra: fix 10bit address configuration
  i2c: muxes: rename first set of drivers to a standard pattern
  of/i2c: implement of_find_i2c_adapter_by_node
  i2c: implement i2c_verify_adapter
  i2c-s3c2410: Add HDMIPHY quirk for S3C2440
  i2c-s3c2410: Rework device type handling
  i2c: muxes are not EXPERIMENTAL anymore
  i2c/of: Automatically populate i2c mux busses from device tree data.
  i2c: Add a struct device * parameter to i2c_add_mux_adapter()
  of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
  i2c: designware: Add clk_{un}prepare() support
  i2c: designware: add PM support
  i2c: ixp2000: remove driver
  i2c: pnx: add device tree support
  i2c: imx: don't use strcpy but strlcpy
  ...

Documentation/devicetree/bindings/i2c/mux.txt

+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner.  The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+	/*
+	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
+	   with two NXP pca8574 GPIO expanders attached, one each to
+	   ports 3 and 4.
+	 */
+
+	mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio1: gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpio2: gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};

Documentation/devicetree/bindings/i2c/samsung-i2c.txt

@@ -6,14 +6,18 @@ Required properties:
   - compatible: value should be either of the following.
       (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
       (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+          inside HDMIPHY block found on several samsung SoCs
   - reg: physical base address of the controller and length of memory mapped
     region.
   - interrupts: interrupt number to the cpu.
   - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-  - gpios: The order of the gpios should be the following: <SDA, SCL>.
-    The gpio specifier depends on the gpio controller.
 
 Optional properties:
+  - gpios: The order of the gpios should be the following: <SDA, SCL>.
+    The gpio specifier depends on the gpio controller. Required in all
+    cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+    lines are permanently wired to the respective client
   - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not

Documentation/devicetree/bindings/i2c/xiic.txt

+Xilinx IIC controller:
+
+Required properties:
+- compatible : Must be "xlnx,xps-iic-2.00.a"
+- reg : IIC register location and length
+- interrupts : IIC controller unterrupt
+- #address-cells = <1>
+- #size-cells = <0>
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+	axi_iic_0: i2c@40800000 {
+		compatible = "xlnx,xps-iic-2.00.a";
+		interrupts = < 1 2 >;
+		reg = < 0x40800000 0x10000 >;
+
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};

Documentation/i2c/muxes/gpio-i2cmux → Documentation/i2c/muxes/i2c-mux-gpio

-Kernel driver gpio-i2cmux
+Kernel driver i2c-gpio-mux
 
 Author: Peter Korsgaard <peter.korsgaard@barco.com>
 
 Description
 -----------
 
-gpio-i2cmux is an i2c mux driver providing access to I2C bus segments
+i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments
 from a master I2C bus and a hardware MUX controlled through GPIO pins.
 
 E.G.:
@@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N.
 Usage
 -----
 
-gpio-i2cmux uses the platform bus, so you need to provide a struct
+i2c-gpio-mux uses the platform bus, so you need to provide a struct
 platform_device with the platform_data pointing to a struct
 gpio_i2cmux_platform_data with the I2C adapter number of the master
 bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/gpio-i2cmux.h for details.
+to control it. See include/linux/i2c-gpio-mux.h for details.
 
 E.G. something like this for a MUX providing 4 bus segments
 controlled through 3 GPIO pins:
 
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-gpio-mux.h>
 #include <linux/platform_device.h>
 
 static const unsigned myboard_gpiomux_gpios[] = {
@@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = {
 };
 
 static struct platform_device myboard_i2cmux = {
-	.name		= "gpio-i2cmux",
+	.name		= "i2c-gpio-mux",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &myboard_i2cmux_data,

MAINTAINERS

@@ -2988,9 +2988,9 @@ GENERIC GPIO I2C MULTIPLEXER DRIVER
 M:	Peter Korsgaard <peter.korsgaard@barco.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
-F:	drivers/i2c/muxes/gpio-i2cmux.c
-F:	include/linux/gpio-i2cmux.h
-F:	Documentation/i2c/muxes/gpio-i2cmux
+F:	drivers/i2c/muxes/i2c-mux-gpio.c
+F:	include/linux/i2c-mux-gpio.h
+F:	Documentation/i2c/muxes/i2c-mux-gpio
 
 GENERIC HDLC (WAN) DRIVERS
 M:	Krzysztof Halasa <khc@pm.waw.pl>
@@ -5148,7 +5148,7 @@ PCA9541 I2C BUS MASTER SELECTOR DRIVER
 M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/muxes/pca9541.c
+F:	drivers/i2c/muxes/i2c-mux-pca9541.c
 
 PCA9564/PCA9665 I2C BUS DRIVER
 M:	Wolfram Sang <w.sang@pengutronix.de>

drivers/i2c/Kconfig

@@ -49,7 +49,6 @@ config I2C_CHARDEV
 
 config I2C_MUX
 	tristate "I2C bus multiplexing support"
-	depends on EXPERIMENTAL
 	help
 	  Say Y here if you want the I2C core to support the ability to
 	  handle multiplexed I2C bus topologies, by presenting each

drivers/i2c/busses/Kconfig

@@ -445,20 +445,6 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
-config I2C_IXP2000
-	tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
-	depends on ARCH_IXP2000
-	select I2C_ALGOBIT
-	help
-	  Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
-	  system and are using GPIO lines for an I2C bus.
-
-	  This support is also available as a module. If so, the module
-	  will be called i2c-ixp2000.
-
-	  This driver is deprecated and will be dropped soon. Use i2c-gpio
-	  instead.
-
 config I2C_MPC
 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC

drivers/i2c/busses/Makefile

@@ -44,7 +44,6 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
-obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o

drivers/i2c/busses/i2c-davinci.c

@@ -755,7 +755,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 	dev->clk = NULL;
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
-	free_irq(IRQ_I2C, dev);
+	free_irq(dev->irq, dev);
 	iounmap(dev->base);
 	kfree(dev);
 

drivers/i2c/busses/i2c-designware-core.c

@@ -164,9 +164,15 @@ static char *abort_sources[] = {
 
 u32 dw_readl(struct dw_i2c_dev *dev, int offset)
 {
-	u32 value = readl(dev->base + offset);
+	u32 value;
 
-	if (dev->swab)
+	if (dev->accessor_flags & ACCESS_16BIT)
+		value = readw(dev->base + offset) |
+			(readw(dev->base + offset + 2) << 16);
+	else
+		value = readl(dev->base + offset);
+
+	if (dev->accessor_flags & ACCESS_SWAP)
 		return swab32(value);
 	else
 		return value;
@@ -174,10 +180,15 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset)
 
 void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
 {
-	if (dev->swab)
+	if (dev->accessor_flags & ACCESS_SWAP)
 		b = swab32(b);
 
-	writel(b, dev->base + offset);
+	if (dev->accessor_flags & ACCESS_16BIT) {
+		writew((u16)b, dev->base + offset);
+		writew((u16)(b >> 16), dev->base + offset + 2);
+	} else {
+		writel(b, dev->base + offset);
+	}
 }
 
 static u32
@@ -251,14 +262,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 
 	input_clock_khz = dev->get_clk_rate_khz(dev);
 
-	/* Configure register endianess access */
 	reg = dw_readl(dev, DW_IC_COMP_TYPE);
 	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
-		dev->swab = 1;
-		reg = DW_IC_COMP_TYPE_VALUE;
-	}
-
-	if (reg != DW_IC_COMP_TYPE_VALUE) {
+		/* Configure register endianess access */
+		dev->accessor_flags |= ACCESS_SWAP;
+	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+		/* Configure register access mode 16bit */
+		dev->accessor_flags |= ACCESS_16BIT;
+	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
 		dev_err(dev->dev, "Unknown Synopsys component type: "
 			"0x%08x\n", reg);
 		return -ENODEV;

drivers/i2c/busses/i2c-designware-core.h

@@ -82,7 +82,7 @@ struct dw_i2c_dev {
 	unsigned int		status;
 	u32			abort_source;
 	int			irq;
-	int			swab;
+	u32			accessor_flags;
 	struct i2c_adapter	adapter;
 	u32			functionality;
 	u32			master_cfg;
@@ -90,6 +90,9 @@ struct dw_i2c_dev {
 	unsigned int		rx_fifo_depth;
 };
 
+#define ACCESS_SWAP		0x00000001
+#define ACCESS_16BIT		0x00000002
+
 extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
 extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
 extern int i2c_dw_init(struct dw_i2c_dev *dev);

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -36,6 +36,7 @@
 #include <linux/interrupt.h>
 #include <linux/of_i2c.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include "i2c-designware-core.h"
@@ -95,7 +96,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 		r = -ENODEV;
 		goto err_free_mem;
 	}
-	clk_enable(dev->clk);
+	clk_prepare_enable(dev->clk);
 
 	dev->functionality =
 		I2C_FUNC_I2C |
@@ -155,7 +156,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 err_iounmap:
 	iounmap(dev->base);
 err_unuse_clocks:
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
 err_free_mem:
@@ -177,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&dev->adapter);
 	put_device(&pdev->dev);
 
-	clk_disable(dev->clk);
+	clk_disable_unprepare(dev->clk);
 	clk_put(dev->clk);
 	dev->clk = NULL;
 
@@ -198,6 +199,31 @@ static const struct of_device_id dw_i2c_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #endif
 
+#ifdef CONFIG_PM
+static int dw_i2c_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i_dev->clk);
+
+	return 0;
+}
+
+static int dw_i2c_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+	clk_prepare_enable(i_dev->clk);
+	i2c_dw_init(i_dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
+
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
 
@@ -207,6 +233,7 @@ static struct platform_driver dw_i2c_driver = {
 		.name	= "i2c_designware",
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(dw_i2c_of_match),
+		.pm	= &dw_i2c_dev_pm_ops,
 	},
 };
 

drivers/i2c/busses/i2c-eg20t.c

@@ -263,11 +263,6 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
 	init_waitqueue_head(&pch_event);
 }
 
-static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
-{
-	return cmp1.tv64 < cmp2.tv64;
-}
-
 /**
  * pch_i2c_wait_for_bus_idle() - check the status of bus.
  * @adap:	Pointer to struct i2c_algo_pch_data.
@@ -316,33 +311,6 @@ static void pch_i2c_start(struct i2c_algo_pch_data *adap)
 	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
 }
 
-/**
- * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event
- * @adap:	Pointer to struct i2c_algo_pch_data.
- */
-static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
-{
-	long ret;
-	ret = wait_event_timeout(pch_event,
-			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
-
-	if (ret == 0) {
-		pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
-		adap->pch_event_flag = 0;
-		return -ETIMEDOUT;
-	}
-
-	if (adap->pch_event_flag & I2C_ERROR_MASK) {
-		pch_err(adap, "error bits set: %x\n", adap->pch_event_flag);
-		adap->pch_event_flag = 0;
-		return -EIO;
-	}
-
-	adap->pch_event_flag = 0;
-
-	return 0;
-}
-
 /**
  * pch_i2c_getack() - to confirm ACK/NACK
  * @adap:	Pointer to struct i2c_algo_pch_data.
@@ -373,6 +341,40 @@ static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
 	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
 }
 
+static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
+{
+	long ret;
+
+	ret = wait_event_timeout(pch_event,
+			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
+	if (!ret) {
+		pch_err(adap, "%s:wait-event timeout\n", __func__);
+		adap->pch_event_flag = 0;
+		pch_i2c_stop(adap);
+		pch_i2c_init(adap);
+		return -ETIMEDOUT;
+	}
+
+	if (adap->pch_event_flag & I2C_ERROR_MASK) {
+		pch_err(adap, "Lost Arbitration\n");
+		adap->pch_event_flag = 0;
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+		pch_i2c_init(adap);
+		return -EAGAIN;
+	}
+
+	adap->pch_event_flag = 0;
+
+	if (pch_i2c_getack(adap)) {
+		pch_dbg(adap, "Receive NACK for slave address"
+			"setting\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /**
  * pch_i2c_repstart() - generate repeated start condition in normal mode
  * @adap:	Pointer to struct i2c_algo_pch_data.
@@ -427,27 +429,12 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 		if (first)
 			pch_i2c_start(adap);
 
-		rtn = pch_i2c_wait_for_xfer_complete(adap);
-		if (rtn == 0) {
-			if (pch_i2c_getack(adap)) {
-				pch_dbg(adap, "Receive NACK for slave address"
-					"setting\n");
-				return -EIO;
-			}
-			addr_8_lsb = (addr & I2C_ADDR_MSK);
-			iowrite32(addr_8_lsb, p + PCH_I2CDR);
-		} else if (rtn == -EIO) { /* Arbitration Lost */
-			pch_err(adap, "Lost Arbitration\n");
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMAL_BIT);
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMIF_BIT);
-			pch_i2c_init(adap);
-			return -EAGAIN;
-		} else { /* wait-event timeout */
-			pch_i2c_stop(adap);
-			return -ETIME;
-		}
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		addr_8_lsb = (addr & I2C_ADDR_MSK);
+		iowrite32(addr_8_lsb, p + PCH_I2CDR);
 	} else {
 		/* set 7 bit slave address and R/W bit as 0 */
 		iowrite32(addr << 1, p + PCH_I2CDR);
@@ -455,44 +442,21 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 			pch_i2c_start(adap);
 	}
 
-	rtn = pch_i2c_wait_for_xfer_complete(adap);
-	if (rtn == 0) {
-		if (pch_i2c_getack(adap)) {
-			pch_dbg(adap, "Receive NACK for slave address"
-				"setting\n");
-			return -EIO;
-		}
-	} else if (rtn == -EIO) { /* Arbitration Lost */
-		pch_err(adap, "Lost Arbitration\n");
-		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
-		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
-		pch_i2c_init(adap);
-		return -EAGAIN;
-	} else { /* wait-event timeout */
-		pch_i2c_stop(adap);
-		return -ETIME;
-	}
+	rtn = pch_i2c_wait_for_check_xfer(adap);
+	if (rtn)
+		return rtn;
 
 	for (wrcount = 0; wrcount < length; ++wrcount) {
 		/* write buffer value to I2C data register */
 		iowrite32(buf[wrcount], p + PCH_I2CDR);
 		pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
 
-		rtn = pch_i2c_wait_for_xfer_complete(adap);
-		if (rtn == 0) {
-			if (pch_i2c_getack(adap)) {
-				pch_dbg(adap, "Receive NACK for slave address"
-					"setting\n");
-				return -EIO;
-			}
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMCF_BIT);
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMIF_BIT);
-		} else { /* wait-event timeout */
-			pch_i2c_stop(adap);
-			return -ETIME;
-		}
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT);
+		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
 	}
 
 	/* check if this is the last message */
@@ -580,50 +544,21 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 		if (first)
 			pch_i2c_start(adap);
 
-		rtn = pch_i2c_wait_for_xfer_complete(adap);
-		if (rtn == 0) {
-			if (pch_i2c_getack(adap)) {
-				pch_dbg(adap, "Receive NACK for slave address"
-					"setting\n");
-				return -EIO;
-			}
-			addr_8_lsb = (addr & I2C_ADDR_MSK);
-			iowrite32(addr_8_lsb, p + PCH_I2CDR);
-		} else if (rtn == -EIO) { /* Arbitration Lost */
-			pch_err(adap, "Lost Arbitration\n");
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMAL_BIT);
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMIF_BIT);
-			pch_i2c_init(adap);
-			return -EAGAIN;
-		} else { /* wait-event timeout */
-			pch_i2c_stop(adap);
-			return -ETIME;
-		}
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		addr_8_lsb = (addr & I2C_ADDR_MSK);
+		iowrite32(addr_8_lsb, p + PCH_I2CDR);
+
 		pch_i2c_restart(adap);
-		rtn = pch_i2c_wait_for_xfer_complete(adap);
-		if (rtn == 0) {
-			if (pch_i2c_getack(adap)) {
-				pch_dbg(adap, "Receive NACK for slave address"
-					"setting\n");
-				return -EIO;
-			}
-			addr_2_msb |= I2C_RD;
-			iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK,
-				  p + PCH_I2CDR);
-		} else if (rtn == -EIO) { /* Arbitration Lost */
-			pch_err(adap, "Lost Arbitration\n");
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMAL_BIT);
-			pch_clrbit(adap->pch_base_address, PCH_I2CSR,
-				   I2CMIF_BIT);
-			pch_i2c_init(adap);
-			return -EAGAIN;
-		} else { /* wait-event timeout */
-			pch_i2c_stop(adap);
-			return -ETIME;
-		}
+
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
+
+		addr_2_msb |= I2C_RD;
+		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 	} else {
 		/* 7 address bits + R/W bit */
 		addr = (((addr) << 1) | (I2C_RD));
@@ -634,23 +569,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 	if (first)
 		pch_i2c_start(adap);
 
-	rtn = pch_i2c_wait_for_xfer_complete(adap);
-	if (rtn == 0) {
-		if (pch_i2c_getack(adap)) {
-			pch_dbg(adap, "Receive NACK for slave address"
-				"setting\n");
-			return -EIO;
-		}
-	} else if (rtn == -EIO) { /* Arbitration Lost */
-		pch_err(adap, "Lost Arbitration\n");
-		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
-		pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
-		pch_i2c_init(adap);
-		return -EAGAIN;
-	} else { /* wait-event timeout */
-		pch_i2c_stop(adap);
-		return -ETIME;
-	}
+	rtn = pch_i2c_wait_for_check_xfer(adap);
+	if (rtn)
+		return rtn;
 
 	if (length == 0) {
 		pch_i2c_stop(adap);
@@ -669,18 +590,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 			if (loop != 1)
 				read_index++;
 
-			rtn = pch_i2c_wait_for_xfer_complete(adap);
-			if (rtn == 0) {
-				if (pch_i2c_getack(adap)) {
-					pch_dbg(adap, "Receive NACK for slave"
-						"address setting\n");
-					return -EIO;
-				}
-			} else { /* wait-event timeout */
-				pch_i2c_stop(adap);
-				return -ETIME;
-			}
-
+			rtn = pch_i2c_wait_for_check_xfer(adap);
+			if (rtn)
+				return rtn;
 		}	/* end for */
 
 		pch_i2c_sendnack(adap);
@@ -690,17 +602,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 		if (length != 1)
 			read_index++;
 
-		rtn = pch_i2c_wait_for_xfer_complete(adap);
-		if (rtn == 0) {
-			if (pch_i2c_getack(adap)) {
-				pch_dbg(adap, "Receive NACK for slave"
-					"address setting\n");
-				return -EIO;
-			}
-		} else { /* wait-event timeout */
-			pch_i2c_stop(adap);
-			return -ETIME;
-		}
+		rtn = pch_i2c_wait_for_check_xfer(adap);
+		if (rtn)
+			return rtn;
 
 		if (last)
 			pch_i2c_stop(adap);
@@ -790,7 +694,7 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
 
 	ret = mutex_lock_interruptible(&pch_mutex);
 	if (ret)
-		return -ERESTARTSYS;
+		return ret;
 
 	if (adap->p_adapter_info->pch_i2c_suspended) {
 		mutex_unlock(&pch_mutex);
@@ -909,7 +813,7 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 
 		pch_adap->owner = THIS_MODULE;
 		pch_adap->class = I2C_CLASS_HWMON;
-		strcpy(pch_adap->name, KBUILD_MODNAME);
+		strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name));
 		pch_adap->algo = &pch_algorithm;
 		pch_adap->algo_data = &adap_info->pch_data[i];
 
@@ -963,7 +867,7 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev)
 		pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
 
 	for (i = 0; i < adap_info->ch_num; i++)
-		adap_info->pch_data[i].pch_base_address = 0;
+		adap_info->pch_data[i].pch_base_address = NULL;
 
 	pci_set_drvdata(pdev, NULL);
 

drivers/i2c/busses/i2c-gpio.c

@@ -190,12 +190,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 
-	/*
-	 * If "dev->id" is negative we consider it as zero.
-	 * The reason to do so is to avoid sysfs names that only make
-	 * sense when there are multiple adapters.
-	 */
-	adap->nr = (pdev->id != -1) ? pdev->id : 0;
+	adap->nr = pdev->id;
 	ret = i2c_bit_add_numbered_bus(adap);
 	if (ret)
 		goto err_add_bus;

drivers/i2c/busses/i2c-imx.c

@@ -512,7 +512,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	}
 
 	/* Setup i2c_imx driver structure */
-	strcpy(i2c_imx->adapter.name, pdev->name);
+	strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
 	i2c_imx->adapter.owner		= THIS_MODULE;
 	i2c_imx->adapter.algo		= &i2c_imx_algo;
 	i2c_imx->adapter.dev.parent	= &pdev->dev;

drivers/i2c/busses/i2c-ixp2000.c

-/*
- * drivers/i2c/busses/i2c-ixp2000.c
- *
- * I2C adapter for IXP2000 systems using GPIOs for I2C bus
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com>
- * Made generic by: Jeff Daly <jeffrey.daly@intel.com>
- *
- * Copyright (c) 2003-2004 MontaVista Software Inc.
- *
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- *
- * From Jeff Daly:
- *
- * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any
- * IXP2000 platform if it uses the HW GPIO in the same manner.  Basically, 
- * SDA and SCL GPIOs have external pullups.  Setting the respective GPIO to 
- * an input will make the signal a '1' via the pullup.  Setting them to 
- * outputs will pull them down. 
- *
- * The GPIOs are open drain signals and are used as configuration strap inputs
- * during power-up so there's generally a buffer on the board that needs to be 
- * 'enabled' to drive the GPIOs.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>	/* Pick up IXP2000-specific bits */
-#include <mach/gpio-ixp2000.h>
-
-static inline int ixp2000_scl_pin(void *data)
-{
-	return ((struct ixp2000_i2c_pins*)data)->scl_pin;
-}
-
-static inline int ixp2000_sda_pin(void *data)
-{
-	return ((struct ixp2000_i2c_pins*)data)->sda_pin;
-}
-
-
-static void ixp2000_bit_setscl(void *data, int val)
-{
-	int i = 5000;
-
-	if (val) {
-		gpio_line_config(ixp2000_scl_pin(data), GPIO_IN);
-		while(!gpio_line_get(ixp2000_scl_pin(data)) && i--);
-	} else {
-		gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT);
-	}
-}
-
-static void ixp2000_bit_setsda(void *data, int val)
-{
-	if (val) {
-		gpio_line_config(ixp2000_sda_pin(data), GPIO_IN);
-	} else {
-		gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT);
-	}
-}
-
-static int ixp2000_bit_getscl(void *data)
-{
-	return gpio_line_get(ixp2000_scl_pin(data));
-}
-
-static int ixp2000_bit_getsda(void *data)
-{
-	return gpio_line_get(ixp2000_sda_pin(data));
-}
-
-struct ixp2000_i2c_data {
-	struct ixp2000_i2c_pins *gpio_pins;
-	struct i2c_adapter adapter;
-	struct i2c_algo_bit_data algo_data;
-};
-
-static int ixp2000_i2c_remove(struct platform_device *plat_dev)
-{
-	struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev);
-
-	platform_set_drvdata(plat_dev, NULL);
-
-	i2c_del_adapter(&drv_data->adapter);
-
-	kfree(drv_data);
-
-	return 0;
-}
-
-static int ixp2000_i2c_probe(struct platform_device *plat_dev)
-{
-	int err;
-	struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
-	struct ixp2000_i2c_data *drv_data = 
-		kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
-
-	if (!drv_data)
-		return -ENOMEM;
-	drv_data->gpio_pins = gpio;
-
-	drv_data->algo_data.data = gpio;
-	drv_data->algo_data.setsda = ixp2000_bit_setsda;
-	drv_data->algo_data.setscl = ixp2000_bit_setscl;
-	drv_data->algo_data.getsda = ixp2000_bit_getsda;
-	drv_data->algo_data.getscl = ixp2000_bit_getscl;
-	drv_data->algo_data.udelay = 6;
-	drv_data->algo_data.timeout = HZ;
-
-	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
-		sizeof(drv_data->adapter.name));
-	drv_data->adapter.algo_data = &drv_data->algo_data,
-
-	drv_data->adapter.dev.parent = &plat_dev->dev;
-
-	gpio_line_config(gpio->sda_pin, GPIO_IN);
-	gpio_line_config(gpio->scl_pin, GPIO_IN);
-	gpio_line_set(gpio->scl_pin, 0);
-	gpio_line_set(gpio->sda_pin, 0);
-
-	if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
-		dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
-		kfree(drv_data);
-		return err;
-	} 
-
-	platform_set_drvdata(plat_dev, drv_data);
-
-	return 0;
-}
-
-static struct platform_driver ixp2000_i2c_driver = {
-	.probe		= ixp2000_i2c_probe,
-	.remove		= ixp2000_i2c_remove,
-	.driver		= {
-		.name	= "IXP2000-I2C",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(ixp2000_i2c_driver);
-
-MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:IXP2000-I2C");
-

drivers/i2c/busses/i2c-mpc.c

@@ -64,6 +64,9 @@ struct mpc_i2c {
 	struct i2c_adapter adap;
 	int irq;
 	u32 real_clk;
+#ifdef CONFIG_PM
+	u8 fdr, dfsrr;
+#endif
 };
 
 struct mpc_i2c_divider {
@@ -703,6 +706,30 @@ static int __devexit fsl_i2c_remove(struct platform_device *op)
 	return 0;
 };
 
+#ifdef CONFIG_PM
+static int mpc_i2c_suspend(struct device *dev)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
+	i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
+
+	return 0;
+}
+
+static int mpc_i2c_resume(struct device *dev)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+	writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
+	writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#endif
+
 static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
 	.setup = mpc_i2c_setup_512x,
 };
@@ -747,6 +774,9 @@ static struct platform_driver mpc_i2c_driver = {
 		.owner = THIS_MODULE,
 		.name = DRV_NAME,
 		.of_match_table = mpc_i2c_of_match,
+#ifdef CONFIG_PM
+		.pm = &mpc_i2c_pm_ops,
+#endif
 	},
 };
 

drivers/i2c/busses/i2c-ocores.c

@@ -55,6 +55,7 @@
 #include <linux/i2c-ocores.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/of_i2c.h>
 
 struct ocores_i2c {
 	void __iomem *base;
@@ -343,6 +344,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 	if (pdata) {
 		for (i = 0; i < pdata->num_devices; i++)
 			i2c_new_device(&i2c->adap, pdata->devices + i);
+	} else {
+		of_i2c_register_devices(&i2c->adap);
 	}
 
 	return 0;

drivers/i2c/busses/i2c-pca-platform.c

@@ -171,7 +171,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
 	i2c->io_size = resource_size(res);
 	i2c->irq = irq;
 
-	i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+	i2c->adap.nr = pdev->id;
 	i2c->adap.owner = THIS_MODULE;
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
 		 "PCA9564/PCA9665 at 0x%08lx",

drivers/i2c/busses/i2c-pxa.c

@@ -1131,11 +1131,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	spin_lock_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
 
-	/*
-	 * If "dev->id" is negative we consider it as zero.
-	 * The reason to do so is to avoid sysfs names that only make
-	 * sense when there are multiple adapters.
-	 */
 	i2c->adap.nr = dev->id;
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
 		 i2c->adap.nr);

drivers/i2c/busses/i2c-s3c2410.c

@@ -44,8 +44,12 @@
 #include <plat/regs-iic.h>
 #include <plat/iic.h>
 
-/* i2c controller state */
+/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
+#define QUIRK_S3C2440		(1 << 0)
+#define QUIRK_HDMIPHY		(1 << 1)
+#define QUIRK_NO_GPIO		(1 << 2)
 
+/* i2c controller state */
 enum s3c24xx_i2c_state {
 	STATE_IDLE,
 	STATE_START,
@@ -54,14 +58,10 @@ enum s3c24xx_i2c_state {
 	STATE_STOP
 };
 
-enum s3c24xx_i2c_type {
-	TYPE_S3C2410,
-	TYPE_S3C2440,
-};
-
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
+	unsigned int            quirks;
 	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
@@ -88,26 +88,45 @@ struct s3c24xx_i2c {
 #endif
 };
 
-/* default platform data removed, dev should always carry data. */
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-i2c",
+		.driver_data	= 0,
+	}, {
+		.name		= "s3c2440-i2c",
+		.driver_data	= QUIRK_S3C2440,
+	}, {
+		.name		= "s3c2440-hdmiphy-i2c",
+		.driver_data	= QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
+	}, { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+	{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
+	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
+	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
+	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#endif
 
-/* s3c24xx_i2c_is2440()
+/* s3c24xx_get_device_quirks
  *
- * return true is this is an s3c2440
+ * Get controller type either from device tree or platform device variant.
 */
 
-static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
+static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(i2c->dev);
-	enum s3c24xx_i2c_type type;
-
-#ifdef CONFIG_OF
-	if (i2c->dev->of_node)
-		return of_device_is_compatible(i2c->dev->of_node,
-				"samsung,s3c2440-i2c");
-#endif
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);
+		return (unsigned int)match->data;
+	}
 
-	type = platform_get_device_id(pdev)->driver_data;
-	return type == TYPE_S3C2440;
+	return platform_get_device_id(pdev)->driver_data;
 }
 
 /* s3c24xx_i2c_master_complete
@@ -471,6 +490,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 	unsigned long iicstat;
 	int timeout = 400;
 
+	/* the timeout for HDMIPHY is reduced to 10 ms because
+	 * the hangup is expected to happen, so waiting 400 ms
+	 * causes only unnecessary system hangup
+	 */
+	if (i2c->quirks & QUIRK_HDMIPHY)
+		timeout = 10;
+
 	while (timeout-- > 0) {
 		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 
@@ -480,6 +506,15 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 		msleep(1);
 	}
 
+	/* hang-up of bus dedicated for HDMIPHY occurred, resetting */
+	if (i2c->quirks & QUIRK_HDMIPHY) {
+		writel(0, i2c->regs + S3C2410_IICCON);
+		writel(0, i2c->regs + S3C2410_IICSTAT);
+		writel(0, i2c->regs + S3C2410_IICDS);
+
+		return 0;
+	}
+
 	return -ETIMEDOUT;
 }
 
@@ -676,7 +711,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 
 	writel(iiccon, i2c->regs + S3C2410_IICCON);
 
-	if (s3c24xx_i2c_is2440(i2c)) {
+	if (i2c->quirks & QUIRK_S3C2440) {
 		unsigned long sda_delay;
 
 		if (pdata->sda_delay) {
@@ -761,6 +796,9 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 {
 	int idx, gpio, ret;
 
+	if (i2c->quirks & QUIRK_NO_GPIO)
+		return 0;
+
 	for (idx = 0; idx < 2; idx++) {
 		gpio = of_get_gpio(i2c->dev->of_node, idx);
 		if (!gpio_is_valid(gpio)) {
@@ -785,6 +823,10 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 {
 	unsigned int idx;
+
+	if (i2c->quirks & QUIRK_NO_GPIO)
+		return;
+
 	for (idx = 0; idx < 2; idx++)
 		gpio_free(i2c->gpios[idx]);
 }
@@ -906,6 +948,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_noclk;
 	}
 
+	i2c->quirks = s3c24xx_get_device_quirks(pdev);
 	if (pdata)
 		memcpy(i2c->pdata, pdata, sizeof(*pdata));
 	else
@@ -1110,28 +1153,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
 
 /* device driver for platform bus bits */
 
-static struct platform_device_id s3c24xx_driver_ids[] = {
-	{
-		.name		= "s3c2410-i2c",
-		.driver_data	= TYPE_S3C2410,
-	}, {
-		.name		= "s3c2440-i2c",
-		.driver_data	= TYPE_S3C2440,
-	}, { },
-};
-MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c24xx_i2c_match[] = {
-	{ .compatible = "samsung,s3c2410-i2c" },
-	{ .compatible = "samsung,s3c2440-i2c" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
-#else
-#define s3c24xx_i2c_match NULL
-#endif
-
 static struct platform_driver s3c24xx_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
@@ -1140,7 +1161,7 @@ static struct platform_driver s3c24xx_i2c_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "s3c-i2c",
 		.pm	= S3C24XX_DEV_PM_OPS,
-		.of_match_table = s3c24xx_i2c_match,
+		.of_match_table = of_match_ptr(s3c24xx_i2c_match),
 	},
 };
 

drivers/i2c/busses/i2c-sh_mobile.c

@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
+#include <linux/of_i2c.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
@@ -653,6 +654,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	adap->dev.parent = &dev->dev;
 	adap->retries = 5;
 	adap->nr = dev->id;
+	adap->dev.of_node = dev->dev.of_node;
 
 	strlcpy(adap->name, dev->name, sizeof(adap->name));
 
@@ -667,6 +669,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 
 	dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
 		 adap->nr, pd->bus_speed);
+
+	of_i2c_register_devices(adap);
 	return 0;
 
  err_all:
@@ -710,11 +714,18 @@ static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
 	.runtime_resume = sh_mobile_i2c_runtime_nop,
 };
 
+static const struct of_device_id sh_mobile_i2c_dt_ids[] __devinitconst = {
+	{ .compatible = "renesas,rmobile-iic", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
+
 static struct platform_driver sh_mobile_i2c_driver = {
 	.driver		= {
 		.name		= "i2c-sh_mobile",
 		.owner		= THIS_MODULE,
 		.pm		= &sh_mobile_i2c_dev_pm_ops,
+		.of_match_table = sh_mobile_i2c_dt_ids,
 	},
 	.probe		= sh_mobile_i2c_probe,
 	.remove		= sh_mobile_i2c_remove,

drivers/i2c/busses/i2c-tegra.c

@@ -401,8 +401,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 			disable_irq_nosync(i2c_dev->irq);
 			i2c_dev->irq_disabled = 1;
 		}
-
-		complete(&i2c_dev->msg_complete);
 		goto err;
 	}
 
@@ -411,7 +409,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 			i2c_dev->msg_err |= I2C_ERR_NO_ACK;
 		if (status & I2C_INT_ARBITRATION_LOST)
 			i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
-		complete(&i2c_dev->msg_complete);
 		goto err;
 	}
 
@@ -429,14 +426,14 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 			tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
 	}
 
+	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+	if (i2c_dev->is_dvc)
+		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
 	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
 		BUG_ON(i2c_dev->msg_buf_remaining);
 		complete(&i2c_dev->msg_complete);
 	}
-
-	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
-	if (i2c_dev->is_dvc)
-		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 	return IRQ_HANDLED;
 err:
 	/* An error occurred, mask all interrupts */
@@ -446,6 +443,8 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
 	if (i2c_dev->is_dvc)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+	complete(&i2c_dev->msg_complete);
 	return IRQ_HANDLED;
 }
 
@@ -476,12 +475,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	packet_header = msg->len - 1;
 	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
 
-	packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
-	packet_header |= I2C_HEADER_IE_ENABLE;
+	packet_header = I2C_HEADER_IE_ENABLE;
 	if (!stop)
 		packet_header |= I2C_HEADER_REPEAT_START;
-	if (msg->flags & I2C_M_TEN)
+	if (msg->flags & I2C_M_TEN) {
+		packet_header |= msg->addr;
 		packet_header |= I2C_HEADER_10BIT_ADDR;
+	} else {
+		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+	}
 	if (msg->flags & I2C_M_IGNORE_NAK)
 		packet_header |= I2C_HEADER_CONT_ON_NAK;
 	if (msg->flags & I2C_M_RD)
@@ -557,7 +559,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 
 static u32 tegra_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
 }
 
 static const struct i2c_algorithm tegra_i2c_algo = {

drivers/i2c/busses/i2c-versatile.c

@@ -104,13 +104,8 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	i2c->algo = i2c_versatile_algo;
 	i2c->algo.data = i2c;
 
-	if (dev->id >= 0) {
-		/* static bus numbering */
-		i2c->adap.nr = dev->id;
-		ret = i2c_bit_add_numbered_bus(&i2c->adap);
-	} else
-		/* dynamic bus numbering */
-		ret = i2c_bit_add_bus(&i2c->adap);
+	i2c->adap.nr = dev->id;
+	ret = i2c_bit_add_numbered_bus(&i2c->adap);
 	if (ret >= 0) {
 		platform_set_drvdata(dev, i2c);
 		of_i2c_register_devices(&i2c->adap);

drivers/i2c/busses/i2c-xiic.c

@@ -40,6 +40,7 @@
 #include <linux/i2c-xiic.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of_i2c.h>
 
 #define DRIVER_NAME "xiic-i2c"
 
@@ -705,8 +706,6 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
 		goto resource_missing;
 
 	pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
-	if (!pdata)
-		return -EINVAL;
 
 	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
@@ -730,6 +729,7 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
 	i2c->adap = xiic_adapter;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
 
 	xiic_reinit(i2c);
 
@@ -748,9 +748,13 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
 		goto add_adapter_failed;
 	}
 
-	/* add in known devices to the bus */
-	for (i = 0; i < pdata->num_devices; i++)
-		i2c_new_device(&i2c->adap, pdata->devices + i);
+	if (pdata) {
+		/* add in known devices to the bus */
+		for (i = 0; i < pdata->num_devices; i++)
+			i2c_new_device(&i2c->adap, pdata->devices + i);
+	}
+
+	of_i2c_register_devices(&i2c->adap);
 
 	return 0;
 
@@ -795,12 +799,21 @@ static int __devexit xiic_i2c_remove(struct platform_device* pdev)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id xiic_of_match[] __devinitconst = {
+	{ .compatible = "xlnx,xps-iic-2.00.a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xiic_of_match);
+#endif
+
 static struct platform_driver xiic_i2c_driver = {
 	.probe   = xiic_i2c_probe,
 	.remove  = __devexit_p(xiic_i2c_remove),
 	.driver  = {
 		.owner = THIS_MODULE,
 		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(xiic_of_match),
 	},
 };
 

drivers/i2c/i2c-core.c

@@ -772,6 +772,23 @@ struct device_type i2c_adapter_type = {
 };
 EXPORT_SYMBOL_GPL(i2c_adapter_type);
 
+/**
+ * i2c_verify_adapter - return parameter as i2c_adapter or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find.  Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_adapter.
+ */
+struct i2c_adapter *i2c_verify_adapter(struct device *dev)
+{
+	return (dev->type == &i2c_adapter_type)
+			? to_i2c_adapter(dev)
+			: NULL;
+}
+EXPORT_SYMBOL(i2c_verify_adapter);
+
 #ifdef CONFIG_I2C_COMPAT
 static struct class_compat *i2c_adapter_compat_class;
 #endif

drivers/i2c/i2c-mux.c

@@ -24,6 +24,8 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
 
 /* multiplexer per channel data */
 struct i2c_mux_priv {
@@ -31,11 +33,11 @@ struct i2c_mux_priv {
 	struct i2c_algorithm algo;
 
 	struct i2c_adapter *parent;
-	void *mux_dev;	/* the mux chip/device */
+	void *mux_priv;	/* the mux chip/device */
 	u32  chan_id;	/* the channel id */
 
-	int (*select)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
-	int (*deselect)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+	int (*select)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
+	int (*deselect)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
 };
 
 static int i2c_mux_master_xfer(struct i2c_adapter *adap,
@@ -47,11 +49,11 @@ static int i2c_mux_master_xfer(struct i2c_adapter *adap,
 
 	/* Switch to the right mux port and perform the transfer. */
 
-	ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+	ret = priv->select(parent, priv->mux_priv, priv->chan_id);
 	if (ret >= 0)
 		ret = parent->algo->master_xfer(parent, msgs, num);
 	if (priv->deselect)
-		priv->deselect(parent, priv->mux_dev, priv->chan_id);
+		priv->deselect(parent, priv->mux_priv, priv->chan_id);
 
 	return ret;
 }
@@ -67,12 +69,12 @@ static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
 
 	/* Select the right mux port and perform the transfer. */
 
-	ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+	ret = priv->select(parent, priv->mux_priv, priv->chan_id);
 	if (ret >= 0)
 		ret = parent->algo->smbus_xfer(parent, addr, flags,
 					read_write, command, size, data);
 	if (priv->deselect)
-		priv->deselect(parent, priv->mux_dev, priv->chan_id);
+		priv->deselect(parent, priv->mux_priv, priv->chan_id);
 
 	return ret;
 }
@@ -87,7 +89,8 @@ static u32 i2c_mux_functionality(struct i2c_adapter *adap)
 }
 
 struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
-				void *mux_dev, u32 force_nr, u32 chan_id,
+				struct device *mux_dev,
+				void *mux_priv, u32 force_nr, u32 chan_id,
 				int (*select) (struct i2c_adapter *,
 					       void *, u32),
 				int (*deselect) (struct i2c_adapter *,
@@ -102,7 +105,7 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 
 	/* Set up private adapter data */
 	priv->parent = parent;
-	priv->mux_dev = mux_dev;
+	priv->mux_priv = mux_priv;
 	priv->chan_id = chan_id;
 	priv->select = select;
 	priv->deselect = deselect;
@@ -124,6 +127,25 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	priv->adap.algo_data = priv;
 	priv->adap.dev.parent = &parent->dev;
 
+	/*
+	 * Try to populate the mux adapter's of_node, expands to
+	 * nothing if !CONFIG_OF.
+	 */
+	if (mux_dev->of_node) {
+		struct device_node *child;
+		u32 reg;
+
+		for_each_child_of_node(mux_dev->of_node, child) {
+			ret = of_property_read_u32(child, "reg", &reg);
+			if (ret)
+				continue;
+			if (chan_id == reg) {
+				priv->adap.dev.of_node = child;
+				break;
+			}
+		}
+	}
+
 	if (force_nr) {
 		priv->adap.nr = force_nr;
 		ret = i2c_add_numbered_adapter(&priv->adap);
@@ -141,6 +163,8 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
 		 i2c_adapter_id(&priv->adap));
 
+	of_i2c_register_devices(&priv->adap);
+
 	return &priv->adap;
 }
 EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);

drivers/i2c/muxes/Kconfig

@@ -15,7 +15,7 @@ config I2C_MUX_GPIO
 	  through GPIO pins.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called gpio-i2cmux.
+	  will be called i2c-mux-gpio.
 
 config I2C_MUX_PCA9541
 	tristate "NXP PCA9541 I2C Master Selector"
@@ -25,7 +25,7 @@ config I2C_MUX_PCA9541
 	  I2C Master Selector.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called pca9541.
+	  will be called i2c-mux-pca9541.
 
 config I2C_MUX_PCA954x
 	tristate "Philips PCA954x I2C Mux/switches"
@@ -35,6 +35,6 @@ config I2C_MUX_PCA954x
 	  I2C mux/switch devices.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called pca954x.
+	  will be called i2c-mux-pca954x.
 
 endmenu

drivers/i2c/muxes/Makefile

 #
 # Makefile for multiplexer I2C chip drivers.
 
-obj-$(CONFIG_I2C_MUX_GPIO)	+= gpio-i2cmux.o
-obj-$(CONFIG_I2C_MUX_PCA9541)	+= pca9541.o
-obj-$(CONFIG_I2C_MUX_PCA954x)	+= pca954x.o
+obj-$(CONFIG_I2C_MUX_GPIO)	+= i2c-mux-gpio.o
+obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
+obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
 
 ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG

drivers/i2c/muxes/gpio-i2cmux.c → drivers/i2c/muxes/i2c-mux-gpio.c

@@ -10,7 +10,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-mux-gpio.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -20,10 +20,10 @@
 struct gpiomux {
 	struct i2c_adapter *parent;
 	struct i2c_adapter **adap; /* child busses */
-	struct gpio_i2cmux_platform_data data;
+	struct i2c_mux_gpio_platform_data data;
 };
 
-static void gpiomux_set(const struct gpiomux *mux, unsigned val)
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
 {
 	int i;
 
@@ -31,28 +31,28 @@ static void gpiomux_set(const struct gpiomux *mux, unsigned val)
 		gpio_set_value(mux->data.gpios[i], val & (1 << i));
 }
 
-static int gpiomux_select(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
 {
 	struct gpiomux *mux = data;
 
-	gpiomux_set(mux, mux->data.values[chan]);
+	i2c_mux_gpio_set(mux, mux->data.values[chan]);
 
 	return 0;
 }
 
-static int gpiomux_deselect(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_deselect(struct i2c_adapter *adap, void *data, u32 chan)
 {
 	struct gpiomux *mux = data;
 
-	gpiomux_set(mux, mux->data.idle);
+	i2c_mux_gpio_set(mux, mux->data.idle);
 
 	return 0;
 }
 
-static int __devinit gpiomux_probe(struct platform_device *pdev)
+static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
 {
 	struct gpiomux *mux;
-	struct gpio_i2cmux_platform_data *pdata;
+	struct i2c_mux_gpio_platform_data *pdata;
 	struct i2c_adapter *parent;
 	int (*deselect) (struct i2c_adapter *, void *, u32);
 	unsigned initial_state;
@@ -86,16 +86,16 @@ static int __devinit gpiomux_probe(struct platform_device *pdev)
 		goto alloc_failed2;
 	}
 
-	if (pdata->idle != GPIO_I2CMUX_NO_IDLE) {
+	if (pdata->idle != I2C_MUX_GPIO_NO_IDLE) {
 		initial_state = pdata->idle;
-		deselect = gpiomux_deselect;
+		deselect = i2c_mux_gpio_deselect;
 	} else {
 		initial_state = pdata->values[0];
 		deselect = NULL;
 	}
 
 	for (i = 0; i < pdata->n_gpios; i++) {
-		ret = gpio_request(pdata->gpios[i], "gpio-i2cmux");
+		ret = gpio_request(pdata->gpios[i], "i2c-mux-gpio");
 		if (ret)
 			goto err_request_gpio;
 		gpio_direction_output(pdata->gpios[i],
@@ -105,8 +105,8 @@ static int __devinit gpiomux_probe(struct platform_device *pdev)
 	for (i = 0; i < pdata->n_values; i++) {
 		u32 nr = pdata->base_nr ? (pdata->base_nr + i) : 0;
 
-		mux->adap[i] = i2c_add_mux_adapter(parent, mux, nr, i,
-						   gpiomux_select, deselect);
+		mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr, i,
+						   i2c_mux_gpio_select, deselect);
 		if (!mux->adap[i]) {
 			ret = -ENODEV;
 			dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
@@ -137,7 +137,7 @@ static int __devinit gpiomux_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __devexit gpiomux_remove(struct platform_device *pdev)
+static int __devexit i2c_mux_gpio_remove(struct platform_device *pdev)
 {
 	struct gpiomux *mux = platform_get_drvdata(pdev);
 	int i;
@@ -156,18 +156,18 @@ static int __devexit gpiomux_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver gpiomux_driver = {
-	.probe	= gpiomux_probe,
-	.remove	= __devexit_p(gpiomux_remove),
+static struct platform_driver i2c_mux_gpio_driver = {
+	.probe	= i2c_mux_gpio_probe,
+	.remove	= __devexit_p(i2c_mux_gpio_remove),
 	.driver	= {
 		.owner	= THIS_MODULE,
-		.name	= "gpio-i2cmux",
+		.name	= "i2c-mux-gpio",
 	},
 };
 
-module_platform_driver(gpiomux_driver);
+module_platform_driver(i2c_mux_gpio_driver);
 
 MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver");
 MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:gpio-i2cmux");
+MODULE_ALIAS("platform:i2c-mux-gpio");

drivers/i2c/muxes/pca9541.c → drivers/i2c/muxes/i2c-mux-pca9541.c

@@ -353,7 +353,8 @@ static int pca9541_probe(struct i2c_client *client,
 	force = 0;
 	if (pdata)
 		force = pdata->modes[0].adap_id;
-	data->mux_adap = i2c_add_mux_adapter(adap, client, force, 0,
+	data->mux_adap = i2c_add_mux_adapter(adap, &client->dev, client,
+					     force, 0,
 					     pca9541_select_chan,
 					     pca9541_release_chan);
 

drivers/i2c/muxes/pca954x.c → drivers/i2c/muxes/i2c-mux-pca954x.c

@@ -226,7 +226,7 @@ static int pca954x_probe(struct i2c_client *client,
 		}
 
 		data->virt_adaps[num] =
-			i2c_add_mux_adapter(adap, client,
+			i2c_add_mux_adapter(adap, &client->dev, client,
 				force, num, pca954x_select_chan,
 				(pdata && pdata->modes[num].deselect_on_exit)
 					? pca954x_deselect_mux : NULL);

drivers/of/of_i2c.c

@@ -90,8 +90,22 @@ struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
 	if (!dev)
 		return NULL;
 
-	return to_i2c_client(dev);
+	return i2c_verify_client(dev);
 }
 EXPORT_SYMBOL(of_find_i2c_device_by_node);
 
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+
 MODULE_LICENSE("GPL");

include/linux/gpio-i2cmux.h → include/linux/i2c-mux-gpio.h

 /*
- * gpio-i2cmux interface to platform code
+ * i2c-mux-gpio interface to platform code
  *
  * Peter Korsgaard <peter.korsgaard@barco.com>
  *
@@ -8,14 +8,14 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef _LINUX_GPIO_I2CMUX_H
-#define _LINUX_GPIO_I2CMUX_H
+#ifndef _LINUX_I2C_MUX_GPIO_H
+#define _LINUX_I2C_MUX_GPIO_H
 
 /* MUX has no specific idle mode */
-#define GPIO_I2CMUX_NO_IDLE	((unsigned)-1)
+#define I2C_MUX_GPIO_NO_IDLE	((unsigned)-1)
 
 /**
- * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux
+ * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio
  * @parent: Parent I2C bus adapter number
  * @base_nr: Base I2C bus number to number adapters from or zero for dynamic
  * @values: Array of bitmasks of GPIO settings (low/high) for each
@@ -25,7 +25,7 @@
  * @n_gpios: Number of GPIOs used to control MUX
  * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
  */
-struct gpio_i2cmux_platform_data {
+struct i2c_mux_gpio_platform_data {
 	int parent;
 	int base_nr;
 	const unsigned *values;
@@ -35,4 +35,4 @@ struct gpio_i2cmux_platform_data {
 	unsigned idle;
 };
 
-#endif /* _LINUX_GPIO_I2CMUX_H */
+#endif /* _LINUX_I2C_MUX_GPIO_H */

include/linux/i2c-mux.h

@@ -34,7 +34,8 @@
  * mux control.
  */
 struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
-				void *mux_dev, u32 force_nr, u32 chan_id,
+				struct device *mux_dev,
+				void *mux_priv, u32 force_nr, u32 chan_id,
 				int (*select) (struct i2c_adapter *,
 					       void *mux_dev, u32 chan_id),
 				int (*deselect) (struct i2c_adapter *,

include/linux/i2c.h

@@ -232,6 +232,7 @@ struct i2c_client {
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
 
 extern struct i2c_client *i2c_verify_client(struct device *dev);
+extern struct i2c_adapter *i2c_verify_adapter(struct device *dev);
 
 static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
 {

include/linux/of_i2c.h

@@ -20,6 +20,10 @@ extern void of_i2c_register_devices(struct i2c_adapter *adap);
 /* must call put_device() when done with returned i2c_client device */
 extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
 
+/* must call put_device() when done with returned i2c_adapter device */
+extern struct i2c_adapter *of_find_i2c_adapter_by_node(
+						struct device_node *node);
+
 #else
 static inline void of_i2c_register_devices(struct i2c_adapter *adap)
 {