提交 aa83e30d 编写于 作者: C Chris Wilson 提交者: Daniel Vetter

drm/i915: Rename GFX_TLB_INVALIDATE_ALWAYS

The documentation calls this GFX_MODE bit "Flush TLB invalidate Mode".
However, that is not a good name for an enable bit as it doesn't make it
clear what is enabled. An even worse name is GFX_TLB_INVALIDATE_ALWAYS
as enabling that bit actually prevents the TLB from being invalidated at
every flush. This leads to great confusion when reading code and
proposed patches. To get around this try to bake in what is enabled by
setting the bit and call it GFX_TLB_INVALIDATE_EXPLICIT.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "Gupta, Sourab" <sourab.gupta@intel.com>
Acked-by: N"Gupta, Sourab" <sourab.gupta@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 c8431fda
......@@ -841,7 +841,7 @@ enum punit_power_well {
#define GFX_MODE_GEN7 0x0229c
#define RING_MODE_GEN7(ring) ((ring)->mmio_base+0x29c)
#define GFX_RUN_LIST_ENABLE (1<<15)
#define GFX_TLB_INVALIDATE_ALWAYS (1<<13)
#define GFX_TLB_INVALIDATE_EXPLICIT (1<<13)
#define GFX_SURFACE_FAULT_ENABLE (1<<12)
#define GFX_REPLAY_MODE (1<<11)
#define GFX_PSMI_GRANULARITY (1<<10)
......
......@@ -589,11 +589,11 @@ static int init_render_ring(struct intel_ring_buffer *ring)
/* Required for the hardware to program scanline values for waiting */
if (INTEL_INFO(dev)->gen == 6)
I915_WRITE(GFX_MODE,
_MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_ALWAYS));
_MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_EXPLICIT));
if (IS_GEN7(dev))
I915_WRITE(GFX_MODE_GEN7,
_MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
_MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_EXPLICIT) |
_MASKED_BIT_ENABLE(GFX_REPLAY_MODE));
if (INTEL_INFO(dev)->gen >= 5) {
......@@ -616,7 +616,7 @@ static int init_render_ring(struct intel_ring_buffer *ring)
* TODO: consider explicitly setting the bit for GEN5
*/
ring->itlb_before_ctx_switch =
!!(I915_READ(GFX_MODE) & GFX_TLB_INVALIDATE_ALWAYS);
!!(I915_READ(GFX_MODE) & GFX_TLB_INVALIDATE_EXPLICIT);
}
if (INTEL_INFO(dev)->gen >= 6)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册