PM: Remove CONFIG_PM_OPS

After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP ||
CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be
replaced with CONFIG_PM.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

drivers/acpi/sleep.c

@@ -585,7 +585,7 @@ int acpi_suspend(u32 acpi_state)
 	return -EINVAL;
 }
 
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 /**
  *	acpi_pm_device_sleep_state - return preferred power state of ACPI device
  *		in the system sleep state given by %acpi_target_sleep_state
@@ -671,7 +671,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
 		*d_min_p = d_min;
 	return d_max;
 }
-#endif /* CONFIG_PM_OPS */
+#endif /* CONFIG_PM */
 
 #ifdef CONFIG_PM_SLEEP
 /**

drivers/base/power/Makefile

-obj-$(CONFIG_PM)	+= sysfs.o
+obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o
 obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
-obj-$(CONFIG_PM_OPS)	+= generic_ops.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_OPP)	+= opp.o
 

drivers/net/e1000e/netdev.c

@@ -5338,7 +5338,7 @@ void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 	__e1000e_disable_aspm(pdev, state);
 }
 
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 static bool e1000e_pm_ready(struct e1000_adapter *adapter)
 {
 	return !!adapter->tx_ring->buffer_info;
@@ -5489,7 +5489,7 @@ static int e1000_runtime_resume(struct device *dev)
 	return __e1000_resume(pdev);
 }
 #endif /* CONFIG_PM_RUNTIME */
-#endif /* CONFIG_PM_OPS */
+#endif /* CONFIG_PM */
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
@@ -6196,7 +6196,7 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 };
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 static const struct dev_pm_ops e1000_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
 	SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
@@ -6210,7 +6210,7 @@ static struct pci_driver e1000_driver = {
 	.id_table = e1000_pci_tbl,
 	.probe    = e1000_probe,
 	.remove   = __devexit_p(e1000_remove),
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 	.driver.pm = &e1000_pm_ops,
 #endif
 	.shutdown = e1000_shutdown,

drivers/net/pch_gbe/pch_gbe_main.c

@@ -2446,7 +2446,7 @@ static struct pci_driver pch_gbe_pcidev = {
 	.id_table = pch_gbe_pcidev_id,
 	.probe = pch_gbe_probe,
 	.remove = pch_gbe_remove,
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 	.driver.pm = &pch_gbe_pm_ops,
 #endif
 	.shutdown = pch_gbe_shutdown,

drivers/pci/pci-driver.c

@@ -431,7 +431,7 @@ static void pci_device_shutdown(struct device *dev)
 	pci_msix_shutdown(pci_dev);
 }
 
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 
 /* Auxiliary functions used for system resume and run-time resume. */
 
@@ -1059,7 +1059,7 @@ static int pci_pm_runtime_idle(struct device *dev)
 
 #endif /* !CONFIG_PM_RUNTIME */
 
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 
 const struct dev_pm_ops pci_dev_pm_ops = {
 	.prepare = pci_pm_prepare,

drivers/scsi/Makefile

@@ -165,7 +165,7 @@ scsi_mod-$(CONFIG_SCSI_NETLINK)	+= scsi_netlink.o
 scsi_mod-$(CONFIG_SYSCTL)	+= scsi_sysctl.o
 scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
 scsi_mod-y			+= scsi_trace.o
-scsi_mod-$(CONFIG_PM_OPS)	+= scsi_pm.o
+scsi_mod-$(CONFIG_PM)		+= scsi_pm.o
 
 scsi_tgt-y			+= scsi_tgt_lib.o scsi_tgt_if.o
 

drivers/scsi/scsi_priv.h

@@ -146,7 +146,7 @@ static inline void scsi_netlink_exit(void) {}
 #endif
 
 /* scsi_pm.c */
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 extern const struct dev_pm_ops scsi_bus_pm_ops;
 #endif
 #ifdef CONFIG_PM_RUNTIME

drivers/scsi/scsi_sysfs.c

@@ -383,7 +383,7 @@ struct bus_type scsi_bus_type = {
         .name		= "scsi",
         .match		= scsi_bus_match,
 	.uevent		= scsi_bus_uevent,
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 	.pm		= &scsi_bus_pm_ops,
 #endif
 };

drivers/usb/core/hcd-pci.c

@@ -335,7 +335,7 @@ void usb_hcd_pci_shutdown(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 
-#ifdef	CONFIG_PM_OPS
+#ifdef	CONFIG_PM
 
 #ifdef	CONFIG_PPC_PMAC
 static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
@@ -580,4 +580,4 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 };
 EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
 
-#endif	/* CONFIG_PM_OPS */
+#endif	/* CONFIG_PM */

include/acpi/acpi_bus.h

@@ -381,7 +381,7 @@ struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
 int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 int acpi_pm_device_sleep_state(struct device *, int *);
 #else
 static inline int acpi_pm_device_sleep_state(struct device *d, int *p)

include/linux/pm.h

@@ -267,7 +267,7 @@ const struct dev_pm_ops name = { \
  * callbacks provided by device drivers supporting both the system sleep PM and
  * runtime PM, make the pm member point to generic_subsys_pm_ops.
  */
-#ifdef CONFIG_PM_OPS
+#ifdef CONFIG_PM
 extern struct dev_pm_ops generic_subsys_pm_ops;
 #define GENERIC_SUBSYS_PM_OPS	(&generic_subsys_pm_ops)
 #else

kernel/power/Kconfig

@@ -220,11 +220,6 @@ config APM_EMULATION
 	  anything, try disabling/enabling this option (or disabling/enabling
 	  APM in your BIOS).
 
-config PM_OPS
-	bool
-	depends on PM_SLEEP || PM_RUNTIME
-	default y
-
 config ARCH_HAS_OPP
 	bool