提交 a9eebd4f 编写于 作者: G Guenter Roeck

hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V

On IT8622E and IT8628E, VIN3 is expected to be connected to +5V.
Add feature flag and reflect in input label.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
上级 64693328
......@@ -296,6 +296,7 @@ struct it87_devices {
#define FEAT_SIX_PWM BIT(14) /* Chip supports 6 pwm chn */
#define FEAT_PWM_FREQ2 BIT(15) /* Separate pwm freq 2 */
#define FEAT_SIX_TEMP BIT(16) /* Up to 6 temp sensors */
#define FEAT_VIN3_5V BIT(17) /* VIN3 connected to +5V */
static const struct it87_devices it87_devices[] = {
[it87] = {
......@@ -433,7 +434,7 @@ static const struct it87_devices it87_devices[] = {
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
| FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
| FEAT_SIX_TEMP,
| FEAT_SIX_TEMP | FEAT_VIN3_5V,
.peci_mask = 0x07,
},
[it8628] = {
......@@ -442,7 +443,7 @@ static const struct it87_devices it87_devices[] = {
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
| FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
| FEAT_SIX_TEMP,
| FEAT_SIX_TEMP | FEAT_VIN3_5V,
.peci_mask = 0x07,
},
};
......@@ -468,6 +469,7 @@ static const struct it87_devices it87_devices[] = {
#define has_six_pwm(data) ((data)->features & FEAT_SIX_PWM)
#define has_pwm_freq2(data) ((data)->features & FEAT_PWM_FREQ2)
#define has_six_temp(data) ((data)->features & FEAT_SIX_TEMP)
#define has_vin3_5v(data) ((data)->features & FEAT_VIN3_5V)
struct it87_sio_data {
enum chips type;
......@@ -1926,7 +1928,9 @@ static ssize_t show_label(struct device *dev, struct device_attribute *attr,
int nr = to_sensor_dev_attr(attr)->index;
const char *label;
if (has_12mv_adc(data) || has_10_9mv_adc(data))
if (has_vin3_5v(data) && nr == 0)
label = labels[0];
else if (has_12mv_adc(data) || has_10_9mv_adc(data))
label = labels_it8721[nr];
else
label = labels[nr];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册