提交 a88b5ba8 编写于 作者: S Sam Ravnborg 提交者: David S. Miller

sparc,sparc64: unify kernel/

o Move all files from sparc64/kernel/ to sparc/kernel
  - rename as appropriate
o Update sparc/Makefile to the changes
o Update sparc/kernel/Makefile to include the sparc64 files

NOTE: This commit changes link order on sparc64!

Link order had to change for either of sparc32 and sparc64.
And assuming sparc64 see more testing than sparc32 change link
order on sparc64 where issues will be caught faster.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d670bd4f
......@@ -67,13 +67,10 @@ endif
endif
head-$(CONFIG_SPARC32) := arch/sparc/kernel/head_$(BITS).o
head-$(CONFIG_SPARC32) += arch/sparc/kernel/init_task_$(BITS).o
head-$(CONFIG_SPARC64) := arch/sparc64/kernel/head.o
head-$(CONFIG_SPARC64) += arch/sparc64/kernel/init_task.o
head-y := arch/sparc/kernel/head_$(BITS).o
head-y += arch/sparc/kernel/init_task_$(BITS).o
core-$(CONFIG_SPARC32) += arch/sparc/kernel/
core-$(CONFIG_SPARC64) += arch/sparc64/kernel/
core-y += arch/sparc/kernel/
core-y += arch/sparc/mm/ arch/sparc/math-emu/
libs-y += arch/sparc/prom/
......
......@@ -38,6 +38,19 @@ obj-$(CONFIG_SPARC32) += muldiv.o
obj-y += prom_$(BITS).o
obj-y += of_device_$(BITS).o
obj-$(CONFIG_SPARC64) += reboot.o
obj-$(CONFIG_SPARC64) += sysfs.o
obj-$(CONFIG_SPARC64) += iommu.o
obj-$(CONFIG_SPARC64) += central.o
obj-$(CONFIG_SPARC64) += starfire.o
obj-$(CONFIG_SPARC64) += power.o
obj-$(CONFIG_SPARC64) += sbus.o
obj-$(CONFIG_SPARC64) += ebus.o
obj-$(CONFIG_SPARC64) += visemul.o
obj-$(CONFIG_SPARC64) += hvapi.o
obj-$(CONFIG_SPARC64) += sstate.o
obj-$(CONFIG_SPARC64) += mdesc.o
# sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
obj-$(CONFIG_SPARC32) += devres.o
devres-y := ../../../kernel/irq/devres.o
......@@ -48,6 +61,7 @@ obj-$(CONFIG_SPARC32_PCI) += pcic.o
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o
obj-$(CONFIG_SPARC64_SMP) += hvtramp.o
obj-y += auxio_$(BITS).o
obj-$(CONFIG_SUN_PM) += apc.o pmc.o
......@@ -56,3 +70,28 @@ obj-$(CONFIG_MODULES) += module_$(BITS).o
obj-$(CONFIG_MODULES) += sparc_ksyms_$(BITS).o
obj-$(CONFIG_SPARC_LED) += led.o
obj-$(CONFIG_KGDB) += kgdb_$(BITS).o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
CFLAGS_REMOVE_ftrace.o := -pg
obj-$(CONFIG_STACKTRACE) += stacktrace.o
# sparc64 PCI
obj-$(CONFIG_SPARC64_PCI) += pci.o pci_common.o psycho_common.o
obj-$(CONFIG_SPARC64_PCI) += pci_psycho.o pci_sabre.o pci_schizo.o
obj-$(CONFIG_SPARC64_PCI) += pci_sun4v.o pci_sun4v_asm.o pci_fire.o
obj-$(CONFIG_PCI_MSI) += pci_msi.o
obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o
# sparc64 cpufreq
obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
obj-$(CONFIG_US3_MC) += chmc.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o
obj-$(CONFIG_AUDIT) += audit.o
audit--$(CONFIG_AUDIT) := compat_audit.o
obj-$(CONFIG_COMPAT) += $(audit--y)
......@@ -825,8 +825,8 @@ setup_tba:
restore
sparc64_boot_end:
#include "etrap.S"
#include "rtrap.S"
#include "etrap_64.S"
#include "rtrap_64.S"
#include "winfixup.S"
#include "fpu_traps.S"
#include "ivec.S"
......@@ -882,7 +882,7 @@ swapper_4m_tsb:
! 0x0000000000428000
#include "systbls.S"
#include "systbls_64.S"
.data
.align 8
......
#
# Makefile for the linux kernel.
#
EXTRA_AFLAGS := -ansi
EXTRA_CFLAGS := -Werror
CFLAGS_REMOVE_ftrace.o = -pg
extra-y := head.o init_task.o ../../sparc/kernel/vmlinux.lds
obj-y := process.o setup.o cpu.o idprom.o reboot.o \
traps.o auxio.o una_asm.o sysfs.o iommu.o \
irq.o ptrace.o time.o sys_sparc.o signal.o \
unaligned.o central.o starfire.o \
power.o sbus.o sparc64_ksyms.o ebus.o \
visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_PCI) += pci.o pci_common.o psycho_common.o \
pci_psycho.o pci_sabre.o pci_schizo.o \
pci_sun4v.o pci_sun4v_asm.o pci_fire.o
obj-$(CONFIG_PCI_MSI) += pci_msi.o
obj-$(CONFIG_SMP) += smp.o trampoline.o hvtramp.o
obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
obj-$(CONFIG_US3_MC) += chmc.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o
obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_AUDIT)$(CONFIG_COMPAT) += compat_audit.o
obj-y += $(obj-yy)
obj-$(CONFIG_KGDB) += kgdb.o
#include "../../sparc/kernel/asm-offsets.c"
#include "../../sparc/kernel/vmlinux.lds.S"
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册