iwlwifi: mvm: send large SKBs to the transport

Now that PCIe knows how to create A-MSDUs, use this
capability and prepare SKBs that are large enough to
build an A-MSDU.
Advertise TSO support towards the network stack and
segment the packet with gso_size set to be the maximal
A-MSDU length (after having taken the headers to be added
into account) to make sure that the skb that is passed
down to the transport are not longer than the maximal
A-MSDU allowed.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

drivers/net/wireless/intel/iwlwifi/mvm/tx.c

@@ -65,6 +65,7 @@
 #include <linux/ieee80211.h>
 #include <linux/etherdevice.h>
 #include <linux/tcp.h>
+#include <net/ip.h>
 
 #include "iwl-trans.h"
 #include "iwl-eeprom-parse.h"
@@ -182,7 +183,8 @@ void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb,
 
 	tx_cmd->tx_flags = cpu_to_le32(tx_flags);
 	/* Total # bytes to be transmitted */
-	tx_cmd->len = cpu_to_le16((u16)skb->len);
+	tx_cmd->len = cpu_to_le16((u16)skb->len +
+		(uintptr_t)info->driver_data[0]);
 	tx_cmd->next_frame_len = 0;
 	tx_cmd->life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
 	tx_cmd->sta_id = sta_id;
@@ -372,6 +374,9 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb)
 			  info->hw_queue != info->control.vif->cab_queue)))
 		return -1;
 
+	/* This holds the amsdu headers length */
+	info->driver_data[0] = (void *)(uintptr_t)0;
+
 	/*
 	 * IWL_MVM_OFFCHANNEL_QUEUE is used for ROC packets that can be used
 	 * in 2 different types of vifs, P2P & STATION. P2P uses the offchannel
@@ -428,33 +433,156 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb)
 	return 0;
 }
 
-static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb_gso,
+#ifdef CONFIG_INET
+static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
 			  struct ieee80211_sta *sta,
 			  struct sk_buff_head *mpdus_skb)
 {
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (void *)skb->data;
+	unsigned int mss = skb_shinfo(skb)->gso_size;
 	struct sk_buff *tmp, *next;
-	char cb[sizeof(skb_gso->cb)];
+	char cb[sizeof(skb->cb)];
+	unsigned int num_subframes, tcp_payload_len, subf_len;
+	bool ipv4 = (skb->protocol == htons(ETH_P_IP));
+	u16 ip_base_id = ipv4 ? ntohs(ip_hdr(skb)->id) : 0;
+	u16 amsdu_add, snap_ip_tcp, pad, i = 0;
+
+	snap_ip_tcp = 8 + skb_transport_header(skb) - skb_network_header(skb) +
+		tcp_hdrlen(skb);
+
+	if (!sta->max_amsdu_len ||
+	    !ieee80211_is_data_qos(hdr->frame_control)) {
+		num_subframes = 1;
+		pad = 0;
+		goto segment;
+	}
+
+	/* TODO: for now, disable A-MSDU inside AMPDU */
+	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+		num_subframes = 1;
+		pad = 0;
+		goto segment;
+	}
+
+	/* Sub frame header + SNAP + IP header + TCP header + MSS */
+	subf_len = sizeof(struct ethhdr) + snap_ip_tcp + mss;
+	pad = (4 - subf_len) & 0x3;
+
+	/*
+	 * If we have N subframes in the A-MSDU, then the A-MSDU's size is
+	 * N * subf_len + (N - 1) * pad.
+	 */
+	num_subframes = (sta->max_amsdu_len + pad) / (subf_len + pad);
+	if (num_subframes > 1) {
+		u8 *qc = ieee80211_get_qos_ctl((void *)skb->data);
+
+		*qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+	}
+
+	tcp_payload_len = skb_tail_pointer(skb) - skb_transport_header(skb) -
+		tcp_hdrlen(skb) + skb->data_len;
+
+	/*
+	 * Make sure we have enough TBs for the A-MSDU:
+	 *	2 for each subframe
+	 *	1 more for each fragment
+	 *	1 more for the potential data in the header
+	 */
+	num_subframes =
+		min_t(unsigned int, num_subframes,
+		      (mvm->trans->max_skb_frags - 1 -
+		       skb_shinfo(skb)->nr_frags) / 2);
+
+	/* This skb fits in one single A-MSDU */
+	if (num_subframes * mss >= tcp_payload_len) {
+		/*
+		 * Compute the length of all the data added for the A-MSDU.
+		 * This will be used to compute the length to write in the TX
+		 * command. We have: SNAP + IP + TCP for n -1 subframes and
+		 * ETH header for n subframes. Note that the original skb
+		 * already had one set of SNAP / IP / TCP headers.
+		 */
+		num_subframes = DIV_ROUND_UP(tcp_payload_len, mss);
+		info = IEEE80211_SKB_CB(skb);
+		amsdu_add = num_subframes * sizeof(struct ethhdr) +
+			(num_subframes - 1) * (snap_ip_tcp + pad);
+		/* This holds the amsdu headers length */
+		info->driver_data[0] = (void *)(uintptr_t)amsdu_add;
+
+		__skb_queue_tail(mpdus_skb, skb);
+		return 0;
+	}
 
-	memcpy(cb, skb_gso->cb, sizeof(cb));
-	next = skb_gso_segment(skb_gso, 0);
-	if (IS_ERR(next))
+	/*
+	 * Trick the segmentation function to make it
+	 * create SKBs that can fit into one A-MSDU.
+	 */
+segment:
+	skb_shinfo(skb)->gso_size = num_subframes * mss;
+	memcpy(cb, skb->cb, sizeof(cb));
+
+	next = skb_gso_segment(skb, NETIF_F_CSUM_MASK | NETIF_F_SG);
+	skb_shinfo(skb)->gso_size = mss;
+	if (WARN_ON_ONCE(IS_ERR(next)))
 		return -EINVAL;
 	else if (next)
-		consume_skb(skb_gso);
+		consume_skb(skb);
 
 	while (next) {
 		tmp = next;
 		next = tmp->next;
+
 		memcpy(tmp->cb, cb, sizeof(tmp->cb));
+		/*
+		 * Compute the length of all the data added for the A-MSDU.
+		 * This will be used to compute the length to write in the TX
+		 * command. We have: SNAP + IP + TCP for n -1 subframes and
+		 * ETH header for n subframes.
+		 */
+		tcp_payload_len = skb_tail_pointer(tmp) -
+			skb_transport_header(tmp) -
+			tcp_hdrlen(tmp) + tmp->data_len;
+
+		if (ipv4)
+			ip_hdr(tmp)->id = htons(ip_base_id + i * num_subframes);
+
+		if (tcp_payload_len > mss) {
+			num_subframes = DIV_ROUND_UP(tcp_payload_len, mss);
+			info = IEEE80211_SKB_CB(tmp);
+			amsdu_add = num_subframes * sizeof(struct ethhdr) +
+				(num_subframes - 1) * (snap_ip_tcp + pad);
+			info->driver_data[0] = (void *)(uintptr_t)amsdu_add;
+			skb_shinfo(tmp)->gso_size = mss;
+		} else {
+			u8 *qc = ieee80211_get_qos_ctl((void *)tmp->data);
+
+			if (ipv4)
+				ip_send_check(ip_hdr(tmp));
+			*qc &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+			skb_shinfo(tmp)->gso_size = 0;
+		}
 
 		tmp->prev = NULL;
 		tmp->next = NULL;
 
 		__skb_queue_tail(mpdus_skb, tmp);
+		i++;
 	}
 
 	return 0;
 }
+#else /* CONFIG_INET */
+static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
+			  struct ieee80211_sta *sta,
+			  struct sk_buff_head *mpdus_skb)
+{
+	/* Impossible to get TSO with CONFIG_INET */
+	WARN_ON(1);
+
+	return -1;
+}
+#endif
 
 /*
  * Sets the fields in the Tx cmd that are crypto related
@@ -560,6 +688,7 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 		   struct ieee80211_sta *sta)
 {
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct sk_buff_head mpdus_skbs;
 	unsigned int payload_len;
 	int ret;
@@ -570,6 +699,9 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 	if (WARN_ON_ONCE(mvmsta->sta_id == IWL_MVM_STATION_COUNT))
 		return -1;
 
+	/* This holds the amsdu headers length */
+	info->driver_data[0] = (void *)(uintptr_t)0;
+
 	if (!skb_is_gso(skb))
 		return iwl_mvm_tx_mpdu(mvm, skb, sta);
 
@@ -589,7 +721,7 @@ int iwl_mvm_tx_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 		return ret;
 
 	while (!skb_queue_empty(&mpdus_skbs)) {
-		struct sk_buff *skb = __skb_dequeue(&mpdus_skbs);
+		skb = __skb_dequeue(&mpdus_skbs);
 
 		ret = iwl_mvm_tx_mpdu(mvm, skb, sta);
 		if (ret) {