Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 a66a6265 编写于 作者: M Michal Simek
浏览文件
操作

microblaze: Use asm-generic/io.h 

Using generic io.h will narrow down code duplication
in architecture io.h.

- define PCI_IOBASE
- remove non existing pci_io_base extern
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
上级 c24cf712
隐藏空白更改
内联 并排
Showing with 19 addition and 294 deletion
arch/microblaze/include/asm/io.h
浏览文件 @ a66a6265
......@@ -15,7 +15,6 @@
#include <asm/page.h>
#include <linux/types.h>
#include <linux/mm.h> /* Get struct page {...} */
#include <asm-generic/iomap.h>
#ifndef CONFIG_PCI
#define _IO_BASE 0
......@@ -25,211 +24,32 @@
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#define PCI_DRAM_OFFSET pci_dram_offset
#endif
struct pci_dev;
extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
#define pci_iounmap pci_iounmap
extern unsigned long isa_io_base;
extern unsigned long pci_io_base;
extern unsigned long pci_dram_offset;
extern resource_size_t isa_mem_base;
#endif
#define PCI_IOBASE ((void __iomem *)_IO_BASE)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
/* the following is needed to support PCI with some drivers */
#define mmiowb()
static inline unsigned char __raw_readb(const volatile void __iomem *addr)
{
return *(volatile unsigned char __force *)addr;
}
static inline unsigned short __raw_readw(const volatile void __iomem *addr)
{
return *(volatile unsigned short __force *)addr;
}
static inline unsigned int __raw_readl(const volatile void __iomem *addr)
{
return *(volatile unsigned int __force *)addr;
}
static inline unsigned long __raw_readq(const volatile void __iomem *addr)
{
return *(volatile unsigned long __force *)addr;
}
static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
{
*(volatile unsigned char __force *)addr = v;
}
static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
{
*(volatile unsigned short __force *)addr = v;
}
static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
{
*(volatile unsigned int __force *)addr = v;
}
static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
{
*(volatile unsigned long __force *)addr = v;
}
/*
* read (readb, readw, readl, readq) and write (writeb, writew,
* writel, writeq) accessors are for PCI and thus little endian.
* Linux 2.4 for Microblaze had this wrong.
*/
static inline unsigned char readb(const volatile void __iomem *addr)
{
return *(volatile unsigned char __force *)addr;
}
static inline unsigned short readw(const volatile void __iomem *addr)
{
return le16_to_cpu(*(volatile unsigned short __force *)addr);
}
static inline unsigned int readl(const volatile void __iomem *addr)
{
return le32_to_cpu(*(volatile unsigned int __force *)addr);
}
#define readq readq
static inline u64 readq(const volatile void __iomem *addr)
{
return le64_to_cpu(__raw_readq(addr));
}
static inline void writeb(unsigned char v, volatile void __iomem *addr)
{
*(volatile unsigned char __force *)addr = v;
}
static inline void writew(unsigned short v, volatile void __iomem *addr)
{
*(volatile unsigned short __force *)addr = cpu_to_le16(v);
}
static inline void writel(unsigned int v, volatile void __iomem *addr)
{
*(volatile unsigned int __force *)addr = cpu_to_le32(v);
}
#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
/* ioread and iowrite variants. thease are for now same as __raw_
* variants of accessors. we might check for endianess in the feature
*/
#define ioread8(addr) __raw_readb((u8 *)(addr))
#define ioread16(addr) __raw_readw((u16 *)(addr))
#define ioread32(addr) __raw_readl((u32 *)(addr))
#define iowrite8(v, addr) __raw_writeb((u8)(v), (u8 *)(addr))
#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
#define ioread16be(addr) __raw_readw((u16 *)(addr))
#define ioread32be(addr) __raw_readl((u32 *)(addr))
#define iowrite16be(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
#define iowrite32be(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
/* These are the definitions for the x86 IO instructions
* inb/inw/inl/outb/outw/outl, the "string" versions
* insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
* inb_p/inw_p/...
* The macros don't do byte-swapping.
*/
#define inb(port) readb((u8 *)((unsigned long)(port)))
#define outb(val, port) writeb((val), (u8 *)((unsigned long)(port)))
#define inw(port) readw((u16 *)((unsigned long)(port)))
#define outw(val, port) writew((val), (u16 *)((unsigned long)(port)))
#define inl(port) readl((u32 *)((unsigned long)(port)))
#define outl(val, port) writel((val), (u32 *)((unsigned long)(port)))
#define inb_p(port) inb((port))
#define outb_p(val, port) outb((val), (port))
#define inw_p(port) inw((port))
#define outw_p(val, port) outw((val), (port))
#define inl_p(port) inl((port))
#define outl_p(val, port) outl((val), (port))
#define memset_io(a, b, c) memset((void *)(a), (b), (c))
#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
#ifdef CONFIG_MMU
#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
#define page_to_bus(page) (page_to_phys(page))
#define bus_to_virt(addr) (phys_to_virt(addr))
extern void iounmap(void __iomem *addr);
/*extern void *__ioremap(phys_addr_t address, unsigned long size,
unsigned long flags);*/
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
#define ioremap_writethrough(addr, size) ioremap((addr), (size))
#define ioremap_nocache(addr, size) ioremap((addr), (size))
#define ioremap_fullcache(addr, size) ioremap((addr), (size))
#else /* CONFIG_MMU */
/**
* virt_to_phys - map virtual addresses to physical
* @address: address to remap
*
* The returned physical address is the physical (CPU) mapping for
* the memory address given. It is only valid to use this function on
* addresses directly mapped or allocated via kmalloc.
*
* This function does not give bus mappings for DMA transfers. In
* almost all conceivable cases a device driver should not be using
* this function
*/
static inline unsigned long __iomem virt_to_phys(volatile void *address)
{
return __pa((unsigned long)address);
}
#define virt_to_bus virt_to_phys
/**
* phys_to_virt - map physical address to virtual
* @address: address to remap
*
* The returned virtual address is a current CPU mapping for
* the memory address given. It is only valid to use this function on
* addresses that have a kernel mapping
*
* This function does not handle bus mappings for DMA transfers. In
* almost all conceivable cases a device driver should not be using
* this function
*/
static inline void *phys_to_virt(unsigned long address)
{
return (void *)__va(address);
}
#define bus_to_virt(a) phys_to_virt(a)
static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
unsigned long flags)
{
return (void *)address;
}
#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
#define iounmap(addr) ((void)0)
#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
#define ioremap_writethrough(addr, size) ioremap((addr), (size))
#define ioremap_nocache(addr, size) ioremap((addr), (size))
#define ioremap_fullcache(addr, size) ioremap((addr), (size))
#define ioremap_wc(addr, size) ioremap((addr), (size))
#endif /* CONFIG_MMU */
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
*/
#define xlate_dev_mem_ptr(p) __va(p)
/*
* Convert a virtual cached pointer to an uncached pointer
*/
#define xlate_dev_kmem_ptr(p) p
/*
* Big Endian
*/
/* Big Endian */
#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
#define out_be16(a, v) __raw_writew((v), (a))
......@@ -239,10 +59,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
#define writel_be(v, a) out_be32((__force unsigned *)a, v)
#define readl_be(a) in_be32((__force unsigned *)a)
/*
* Little endian
*/
/* Little endian */
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
......@@ -253,100 +70,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
#define out_8(a, v) __raw_writeb((v), (a))
#define in_8(a) __raw_readb(a)
#define mmiowb()
#define ioport_map(port, nr) ((void __iomem *)(port))
#define ioport_unmap(addr)
/* from asm-generic/io.h */
#ifndef insb
static inline void insb(unsigned long addr, void *buffer, int count)
{
if (count) {
u8 *buf = buffer;
do {
u8 x = inb(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#ifndef insw
static inline void insw(unsigned long addr, void *buffer, int count)
{
if (count) {
u16 *buf = buffer;
do {
u16 x = inw(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#ifndef insl
static inline void insl(unsigned long addr, void *buffer, int count)
{
if (count) {
u32 *buf = buffer;
do {
u32 x = inl(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#ifndef outsb
static inline void outsb(unsigned long addr, const void *buffer, int count)
{
if (count) {
const u8 *buf = buffer;
do {
outb(*buf++, addr);
} while (--count);
}
}
#endif
#ifndef outsw
static inline void outsw(unsigned long addr, const void *buffer, int count)
{
if (count) {
const u16 *buf = buffer;
do {
outw(*buf++, addr);
} while (--count);
}
}
#endif
#ifndef outsl
static inline void outsl(unsigned long addr, const void *buffer, int count)
{
if (count) {
const u32 *buf = buffer;
do {
outl(*buf++, addr);
} while (--count);
}
}
#endif
#define ioread8_rep(p, dst, count) \
insb((unsigned long) (p), (dst), (count))
#define ioread16_rep(p, dst, count) \
insw((unsigned long) (p), (dst), (count))
#define ioread32_rep(p, dst, count) \
insl((unsigned long) (p), (dst), (count))
#define iowrite8_rep(p, src, count) \
outsb((unsigned long) (p), (src), (count))
#define iowrite16_rep(p, src, count) \
outsw((unsigned long) (p), (src), (count))
#define iowrite32_rep(p, src, count) \
outsl((unsigned long) (p), (src), (count))
#include <asm-generic/io.h>
#define readb_relaxed readb
#define readw_relaxed readw
......
arch/microblaze/kernel/signal.c
浏览文件 @ a66a6265
......@@ -216,7 +216,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
/* MS: I need add offset in page */
address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
/* MS address is virtual */
address = virt_to_phys(address);
address = __virt_to_phys(address);
invalidate_icache_range(address, address + 8);
flush_dcache_range(address, address + 8);
}
......
arch/microblaze/mm/consistent.c
浏览文件 @ a66a6265
......@@ -117,7 +117,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
ret = (void *)va;
/* This gives us the real physical address of the first page. */
*dma_handle = pa = virt_to_bus((void *)vaddr);
*dma_handle = pa = __virt_to_phys(vaddr);
#endif
/*
......
arch/microblaze/mm/init.c
浏览文件 @ a66a6265
......@@ -369,7 +369,7 @@ asmlinkage void __init mmu_init(void)
if (initrd_start) {
unsigned long size;
size = initrd_end - initrd_start;
memblock_reserve(virt_to_phys(initrd_start), size);
memblock_reserve(__virt_to_phys(initrd_start), size);
}
#endif /* CONFIG_BLK_DEV_INITRD */
......
arch/microblaze/mm/pgtable.c
浏览文件 @ a66a6265
......@@ -69,10 +69,11 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
*
* However, allow remap of rootfs: TBD
*/
if (mem_init_done &&
p >= memory_start && p < virt_to_phys(high_memory) &&
!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
p < virt_to_phys((unsigned long)__bss_stop))) {
!(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
p < __virt_to_phys((phys_addr_t)__bss_stop))) {
pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n",
(unsigned long)p, __builtin_return_address(0));
return NULL;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或