提交 a649637c 编写于 作者: A Andy Adamson 提交者: J. Bruce Fields

nfsd41: bound forechannel drc size by memory usage

By using the requested ca_maxresponsesize_cached * ca_maxresponses to bound
a forechannel drc request size, clients can tailor a session to usage.

For example, an I/O session (READ/WRITE only) can have a much smaller
ca_maxresponsesize_cached (for only WRITE compound responses) and a lot larger
ca_maxresponses to service a large in-flight data window.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
上级 a06b1261
...@@ -414,34 +414,64 @@ gen_sessionid(struct nfsd4_session *ses) ...@@ -414,34 +414,64 @@ gen_sessionid(struct nfsd4_session *ses)
} }
/* /*
* Give the client the number of slots it requests bound by * The protocol defines ca_maxresponssize_cached to include the size of
* NFSD_MAX_SLOTS_PER_SESSION and by nfsd_drc_max_mem. * the rpc header, but all we need to cache is the data starting after
* the end of the initial SEQUENCE operation--the rest we regenerate
* each time. Therefore we can advertise a ca_maxresponssize_cached
* value that is the number of bytes in our cache plus a few additional
* bytes. In order to stay on the safe side, and not promise more than
* we can cache, those additional bytes must be the minimum possible: 24
* bytes of rpc header (xid through accept state, with AUTH_NULL
* verifier), 12 for the compound header (with zero-length tag), and 44
* for the SEQUENCE op response:
*/
#define NFSD_MIN_HDR_SEQ_SZ (24 + 12 + 44)
/*
* Give the client the number of ca_maxresponsesize_cached slots it
* requests, of size bounded by NFSD_SLOT_CACHE_SIZE,
* NFSD_MAX_MEM_PER_SESSION, and nfsd_drc_max_mem. Do not allow more
* than NFSD_MAX_SLOTS_PER_SESSION.
* *
* If we run out of reserved DRC memory we should (up to a point) re-negotiate * If we run out of reserved DRC memory we should (up to a point)
* active sessions and reduce their slot usage to make rooom for new * re-negotiate active sessions and reduce their slot usage to make
* connections. For now we just fail the create session. * rooom for new connections. For now we just fail the create session.
*/ */
static int set_forechannel_maxreqs(struct nfsd4_channel_attrs *fchan) static int set_forechannel_drc_size(struct nfsd4_channel_attrs *fchan)
{ {
int mem; int mem, size = fchan->maxresp_cached;
if (fchan->maxreqs < 1) if (fchan->maxreqs < 1)
return nfserr_inval; return nfserr_inval;
else if (fchan->maxreqs > NFSD_MAX_SLOTS_PER_SESSION)
fchan->maxreqs = NFSD_MAX_SLOTS_PER_SESSION;
mem = fchan->maxreqs * NFSD_SLOT_CACHE_SIZE; if (size < NFSD_MIN_HDR_SEQ_SZ)
size = NFSD_MIN_HDR_SEQ_SZ;
size -= NFSD_MIN_HDR_SEQ_SZ;
if (size > NFSD_SLOT_CACHE_SIZE)
size = NFSD_SLOT_CACHE_SIZE;
/* bound the maxreqs by NFSD_MAX_MEM_PER_SESSION */
mem = fchan->maxreqs * size;
if (mem > NFSD_MAX_MEM_PER_SESSION) {
fchan->maxreqs = NFSD_MAX_MEM_PER_SESSION / size;
if (fchan->maxreqs > NFSD_MAX_SLOTS_PER_SESSION)
fchan->maxreqs = NFSD_MAX_SLOTS_PER_SESSION;
mem = fchan->maxreqs * size;
}
spin_lock(&nfsd_drc_lock); spin_lock(&nfsd_drc_lock);
if (mem + nfsd_drc_mem_used > nfsd_drc_max_mem) /* bound the total session drc memory ussage */
mem = ((nfsd_drc_max_mem - nfsd_drc_mem_used) / if (mem + nfsd_drc_mem_used > nfsd_drc_max_mem) {
NFSD_SLOT_CACHE_SIZE) * NFSD_SLOT_CACHE_SIZE; fchan->maxreqs = (nfsd_drc_max_mem - nfsd_drc_mem_used) / size;
mem = fchan->maxreqs * size;
}
nfsd_drc_mem_used += mem; nfsd_drc_mem_used += mem;
spin_unlock(&nfsd_drc_lock); spin_unlock(&nfsd_drc_lock);
fchan->maxreqs = mem / NFSD_SLOT_CACHE_SIZE;
if (fchan->maxreqs == 0) if (fchan->maxreqs == 0)
return nfserr_resource; return nfserr_resource;
fchan->maxresp_cached = size + NFSD_MIN_HDR_SEQ_SZ;
return 0; return 0;
} }
...@@ -466,9 +496,6 @@ static int init_forechannel_attrs(struct svc_rqst *rqstp, ...@@ -466,9 +496,6 @@ static int init_forechannel_attrs(struct svc_rqst *rqstp,
fchan->maxresp_sz = maxcount; fchan->maxresp_sz = maxcount;
session_fchan->maxresp_sz = fchan->maxresp_sz; session_fchan->maxresp_sz = fchan->maxresp_sz;
session_fchan->maxresp_cached = NFSD_SLOT_CACHE_SIZE;
fchan->maxresp_cached = session_fchan->maxresp_cached;
/* Use the client's maxops if possible */ /* Use the client's maxops if possible */
if (fchan->maxops > NFSD_MAX_OPS_PER_COMPOUND) if (fchan->maxops > NFSD_MAX_OPS_PER_COMPOUND)
fchan->maxops = NFSD_MAX_OPS_PER_COMPOUND; fchan->maxops = NFSD_MAX_OPS_PER_COMPOUND;
...@@ -478,9 +505,12 @@ static int init_forechannel_attrs(struct svc_rqst *rqstp, ...@@ -478,9 +505,12 @@ static int init_forechannel_attrs(struct svc_rqst *rqstp,
* recover pages from existing sessions. For now fail session * recover pages from existing sessions. For now fail session
* creation. * creation.
*/ */
status = set_forechannel_maxreqs(fchan); status = set_forechannel_drc_size(fchan);
session_fchan->maxresp_cached = fchan->maxresp_cached;
session_fchan->maxreqs = fchan->maxreqs; session_fchan->maxreqs = fchan->maxreqs;
dprintk("%s status %d\n", __func__, status);
return status; return status;
} }
......
...@@ -92,13 +92,17 @@ struct nfs4_cb_conn { ...@@ -92,13 +92,17 @@ struct nfs4_cb_conn {
struct rpc_cred * cb_cred; struct rpc_cred * cb_cred;
}; };
/* Maximum number of slots per session. 128 is useful for long haul TCP */ /* Maximum number of slots per session. 160 is useful for long haul TCP */
#define NFSD_MAX_SLOTS_PER_SESSION 128 #define NFSD_MAX_SLOTS_PER_SESSION 160
/* Maximum number of pages per slot cache entry */ /* Maximum number of pages per slot cache entry */
#define NFSD_PAGES_PER_SLOT 1 #define NFSD_PAGES_PER_SLOT 1
#define NFSD_SLOT_CACHE_SIZE PAGE_SIZE #define NFSD_SLOT_CACHE_SIZE PAGE_SIZE
/* Maximum number of operations per session compound */ /* Maximum number of operations per session compound */
#define NFSD_MAX_OPS_PER_COMPOUND 16 #define NFSD_MAX_OPS_PER_COMPOUND 16
/* Maximum number of NFSD_SLOT_CACHE_SIZE slots per session */
#define NFSD_CACHE_SIZE_SLOTS_PER_SESSION 32
#define NFSD_MAX_MEM_PER_SESSION \
(NFSD_CACHE_SIZE_SLOTS_PER_SESSION * NFSD_SLOT_CACHE_SIZE)
struct nfsd4_cache_entry { struct nfsd4_cache_entry {
__be32 ce_status; __be32 ce_status;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册