Use physical addresses at the interface level, letting drivers remap

them as appropriate.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/dec/ecc-berr.c

@@ -227,11 +227,11 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  */
 static inline void dec_kn02_be_init(void)
 {
-	volatile u32 *csr = (void *)KN02_CSR_BASE;
+	volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
 	unsigned long flags;
 
-	kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
-	kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+	kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR);
+	kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN);
 
 	spin_lock_irqsave(&kn02_lock, flags);
 
@@ -250,11 +250,11 @@ static inline void dec_kn02_be_init(void)
 
 static inline void dec_kn03_be_init(void)
 {
-	volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
-	volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR);
+	volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
-	kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
-	kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+	kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR);
+	kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN);
 
 	/*
 	 * Set normal ECC detection and generation, enable ECC correction.

arch/mips/dec/int-handler.S

@@ -2,9 +2,9 @@
  * arch/mips/dec/int-handler.S
  *
  * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  *
- * Written by Ralf Baechle and Andreas Busse, modified for DECStation
+ * Written by Ralf Baechle and Andreas Busse, modified for DECstation
  * support by Paul Antoine and Harald Koerfgen.
  *
  * completly rewritten:
@@ -14,11 +14,12 @@
  * by Maciej W. Rozycki.
  */
 #include <linux/config.h>
+
+#include <asm/addrspace.h>
 #include <asm/asm.h>
-#include <asm/regdef.h>
 #include <asm/mipsregs.h>
+#include <asm/regdef.h>
 #include <asm/stackframe.h>
-#include <asm/addrspace.h>
 
 #include <asm/dec/interrupts.h>
 #include <asm/dec/ioasic_addrs.h>
@@ -28,11 +29,14 @@
 #include <asm/dec/kn02xa.h>
 #include <asm/dec/kn03.h>
 
+#define KN02_CSR_BASE		CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
+#define KN02XA_IOASIC_BASE	CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
+#define KN03_IOASIC_BASE	CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
 
 		.text
 		.set	noreorder
 /*
- * decstation_handle_int: Interrupt handler for DECStations
+ * decstation_handle_int: Interrupt handler for DECstations
  *
  * We follow the model in the Indy interrupt code by David Miller, where he
  * says: a lot of complication here is taken away because:
@@ -48,7 +52,7 @@
  * 3) Linux only thinks in terms of all IRQs on or all IRQs
  *    off, nothing in between like BSD spl() brain-damage.
  *
- * Furthermore, the IRQs on the DECStations look basically (barring
+ * Furthermore, the IRQs on the DECstations look basically (barring
  * software IRQs which we don't use at all) like...
  *
  * DS2100/3100's, aka kn01, aka Pmax:
@@ -61,7 +65,7 @@
  *             3        Lance Ethernet
  *             4        DZ11 serial
  *             5        RTC
- *             6        Memory Controller
+ *             6        Memory Controller & Video
  *             7        FPU
  *
  * DS5000/200, aka kn02, aka 3max:

arch/mips/dec/kn01-berr.c

@@ -51,7 +51,7 @@ DEFINE_SPINLOCK(kn01_lock);
 
 static inline void dec_kn01_be_ack(void)
 {
-	volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR);
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	unsigned long flags;
 
 	spin_lock_irqsave(&kn01_lock, flags);
@@ -64,7 +64,8 @@ static inline void dec_kn01_be_ack(void)
 
 static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 {
-	volatile u32 *kn01_erraddr = (void *)(KN01_SLOT_BASE + KN01_ERRADDR);
+	volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE +
+							KN01_ERRADDR);
 
 	static const char excstr[] = "exception";
 	static const char intstr[] = "interrupt";
@@ -152,7 +153,7 @@ int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup)
 irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
 				    struct pt_regs *regs)
 {
-	volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR);
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	int action;
 
 	if (!(*csr & KN01_CSR_MEMERR))
@@ -178,7 +179,7 @@ irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
 
 void __init dec_kn01_be_init(void)
 {
-	volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR);
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	unsigned long flags;
 
 	spin_lock_irqsave(&kn01_lock, flags);

arch/mips/dec/kn02-irq.c

@@ -37,7 +37,8 @@ static int kn02_irq_base;
 
 static inline void unmask_kn02_irq(unsigned int irq)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 
 	cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16));
 	*csr = cached_kn02_csr;
@@ -45,7 +46,8 @@ static inline void unmask_kn02_irq(unsigned int irq)
 
 static inline void mask_kn02_irq(unsigned int irq)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 
 	cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16));
 	*csr = cached_kn02_csr;
@@ -105,7 +107,8 @@ static struct hw_interrupt_type kn02_irq_type = {
 
 void __init init_kn02_irqs(int base)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 	unsigned long flags;
 	int i;
 

arch/mips/dec/kn02xa-berr.c

@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
+#include <asm/addrspace.h>
 #include <asm/system.h>
 #include <asm/traps.h>
 
@@ -29,8 +30,8 @@
 
 static inline void dec_kn02xa_be_ack(void)
 {
-	volatile u32 *mer = (void *)KN02XA_MER;
-	volatile u32 *mem_intr = (void *)KN02XA_MEM_INTR;
+	volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
+	volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
 
 	*mer = KN02CA_MER_INTR;		/* Clear errors; keep the ARC IRQ. */
 	*mem_intr = 0;			/* Any write clears the bus IRQ. */
@@ -40,8 +41,8 @@ static inline void dec_kn02xa_be_ack(void)
 static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
 				 int invoker)
 {
-	volatile u32 *kn02xa_mer = (void *)KN02XA_MER;
-	volatile u32 *kn02xa_ear = (void *)KN02XA_EAR;
+	volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
+	volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
 
 	static const char excstr[] = "exception";
 	static const char intstr[] = "interrupt";
@@ -126,7 +127,7 @@ irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
 
 void __init dec_kn02xa_be_init(void)
 {
-	volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR);
+	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
         /* For KN04 we need to make sure EE (?) is enabled in the MB.  */
         if (current_cpu_data.cputype == CPU_R4000SC)

arch/mips/dec/prom/identify.c

@@ -2,7 +2,7 @@
  * identify.c: machine identification code.
  *
  * Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine
- * Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005  Maciej W. Rozycki
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 
 #include <asm/bootinfo.h>
+
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 #include <asm/dec/kn01.h>
@@ -21,6 +22,7 @@
 #include <asm/dec/kn03.h>
 #include <asm/dec/kn230.h>
 #include <asm/dec/prom.h>
+#include <asm/dec/system.h>
 
 #include "dectypes.h"
 
@@ -68,34 +70,44 @@ EXPORT_SYMBOL(dec_rtc_base);
 
 static inline void prom_init_kn01(void)
 {
-	dec_rtc_base = (void *)KN01_RTC_BASE;
+	dec_kn_slot_base = KN01_SLOT_BASE;
 	dec_kn_slot_size = KN01_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
 }
 
 static inline void prom_init_kn230(void)
 {
-	dec_rtc_base = (void *)KN01_RTC_BASE;
+	dec_kn_slot_base = KN01_SLOT_BASE;
 	dec_kn_slot_size = KN01_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
 }
 
 static inline void prom_init_kn02(void)
 {
-	dec_rtc_base = (void *)KN02_RTC_BASE;
+	dec_kn_slot_base = KN02_SLOT_BASE;
 	dec_kn_slot_size = KN02_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC);
 }
 
 static inline void prom_init_kn02xa(void)
 {
-	ioasic_base = (void *)KN02XA_IOASIC_BASE;
-	dec_rtc_base = (void *)KN02XA_RTC_BASE;
+	dec_kn_slot_base = KN02XA_SLOT_BASE;
 	dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+	ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
 }
 
 static inline void prom_init_kn03(void)
 {
-	ioasic_base = (void *)KN03_IOASIC_BASE;
-	dec_rtc_base = (void *)KN03_RTC_BASE;
+	dec_kn_slot_base = KN03_SLOT_BASE;
 	dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+	ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
 }
 
 

arch/mips/dec/setup.c

@@ -39,6 +39,7 @@
 #include <asm/dec/kn02ca.h>
 #include <asm/dec/kn03.h>
 #include <asm/dec/kn230.h>
+#include <asm/dec/system.h>
 
 
 extern void dec_machine_restart(char *command);
@@ -48,10 +49,16 @@ extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs);
 
 extern asmlinkage void decstation_handle_int(void);
 
+unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+EXPORT_SYMBOL(dec_kn_slot_base);
+EXPORT_SYMBOL(dec_kn_slot_size);
+
 spinlock_t ioasic_ssr_lock;
 
 volatile u32 *ioasic_base;
-unsigned long dec_kn_slot_size;
+
+EXPORT_SYMBOL(ioasic_base);
 
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
@@ -78,6 +85,9 @@ unsigned long dec_kn_slot_size;
 int dec_interrupt[DEC_NR_INTS] = {
 	[0 ... DEC_NR_INTS - 1] = -1
 };
+
+EXPORT_SYMBOL(dec_interrupt);
+
 int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
 	{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
 };
@@ -755,7 +765,3 @@ void __init arch_init_irq(void)
 	if (dec_interrupt[DEC_IRQ_HALT] >= 0)
 		setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
 }
-
-EXPORT_SYMBOL(ioasic_base);
-EXPORT_SYMBOL(dec_kn_slot_size);
-EXPORT_SYMBOL(dec_interrupt);

drivers/tc/tc.c

@@ -10,31 +10,29 @@
  * Copyright (c) Harald Koerfgen, 1998
  * Copyright (c) 2001, 2003, 2005  Maciej W. Rozycki
  */
-#include <linux/string.h>
 #include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
 
 #include <asm/addrspace.h>
+#include <asm/bug.h>
 #include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/paccess.h>
+
 #include <asm/dec/machtype.h>
 #include <asm/dec/prom.h>
 #include <asm/dec/tcinfo.h>
 #include <asm/dec/tcmodule.h>
 #include <asm/dec/interrupts.h>
-#include <asm/paccess.h>
-#include <asm/ptrace.h>
-
-#define TC_DEBUG
 
 MODULE_LICENSE("GPL");
 slot_info tc_bus[MAX_SLOT];
 static int num_tcslots;
 static tcinfo *info;
 
-unsigned long system_base;
-
 /*
  * Interface to the world. Read comment in include/asm-mips/tc.h.
  */
@@ -97,13 +95,16 @@ unsigned long get_tc_speed(void)
 static void __init tc_probe(unsigned long startaddr, unsigned long size,
 			    int slots)
 {
+	unsigned long slotaddr;
 	int i, slot, err;
 	long offset;
-	unsigned char pattern[4];
-	unsigned char *module;
+	u8 pattern[4];
+	volatile u8 *module;
 
 	for (slot = 0; slot < slots; slot++) {
-		module = (char *)(startaddr + slot * size);
+		slotaddr = startaddr + slot * size;
+		module = ioremap_nocache(slotaddr, size);
+		BUG_ON(!module);
 
 		offset = OLDCARD;
 
@@ -112,8 +113,10 @@ static void __init tc_probe(unsigned long startaddr, unsigned long size,
 		err |= get_dbe(pattern[1], module + OLDCARD + TC_PATTERN1);
 		err |= get_dbe(pattern[2], module + OLDCARD + TC_PATTERN2);
 		err |= get_dbe(pattern[3], module + OLDCARD + TC_PATTERN3);
-		if (err)
+		if (err) {
+			iounmap(module);
 			continue;
+		}
 
 		if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
 		    pattern[2] != 0xaa || pattern[3] != 0xff) {
@@ -124,16 +127,20 @@ static void __init tc_probe(unsigned long startaddr, unsigned long size,
 			err |= get_dbe(pattern[1], module + TC_PATTERN1);
 			err |= get_dbe(pattern[2], module + TC_PATTERN2);
 			err |= get_dbe(pattern[3], module + TC_PATTERN3);
-			if (err)
+			if (err) {
+				iounmap(module);
 				continue;
+			}
 		}
 
 		if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
-		    pattern[2] != 0xaa || pattern[3] != 0xff)
+		    pattern[2] != 0xaa || pattern[3] != 0xff) {
+			iounmap(module);
 			continue;
+		}
 
-		tc_bus[slot].base_addr = (unsigned long)module;
-		for(i = 0; i < 8; i++) {
+		tc_bus[slot].base_addr = slotaddr;
+		for (i = 0; i < 8; i++) {
 			tc_bus[slot].firmware[i] =
 				module[TC_FIRM_VER + offset + 4 * i];
 			tc_bus[slot].vendor[i] =
@@ -171,6 +178,8 @@ static void __init tc_probe(unsigned long startaddr, unsigned long size,
 			tc_bus[slot].interrupt = -1;
 			break;
 		}
+
+		iounmap(module);
 	}
 }
 
@@ -196,8 +205,8 @@ static int __init tc_init(void)
 		tc_bus[i].flags = FREE;
 	}
 
-	info = (tcinfo *) rex_gettcinfo();
-	slot0addr = (unsigned long)CKSEG1ADDR(rex_slot_address(0));
+	info = rex_gettcinfo();
+	slot0addr = CPHYSADDR((long)rex_slot_address(0));
 
 	switch (mips_machtype) {
 	case MACH_DS5000_200:
@@ -216,35 +225,21 @@ static int __init tc_init(void)
 
 	tc_clock = 10000 / info->clk_period;
 
-	if (TURBOCHANNEL && info->slot_size && slot0addr) {
-		printk("TURBOchannel rev. %1d at %2d.%1d MHz ", info->revision,
-			tc_clock / 10, tc_clock % 10);
-		printk("(with%s parity)\n", info->parity ? "" : "out");
+	if (info->slot_size && slot0addr) {
+		pr_info("TURBOchannel rev. %d at %d.%d MHz (with%s parity)\n",
+			info->revision, tc_clock / 10, tc_clock % 10,
+			info->parity ? "" : "out");
 
 		slot_size = info->slot_size << 20;
 
 		tc_probe(slot0addr, slot_size, num_tcslots);
 
-  		/*
-  		 * All TURBOchannel DECstations have the onboard devices
- 		 * where the (num_tcslots + 0 or 1 on DS5k/xx) Option Module
- 		 * would be.
- 		 */
- 		if(mips_machtype == MACH_DS5000_XX)
- 			i = 1;
-		else
- 			i = 0;
-
- 	        system_base = slot0addr + slot_size * (num_tcslots + i);
-
-#ifdef TC_DEBUG
-		for (i = 0; i < num_tcslots; i++)
-			if (tc_bus[i].base_addr) {
-				printk("    slot %d: ", i);
-				printk("%s %s %s\n", tc_bus[i].vendor,
-					tc_bus[i].name, tc_bus[i].firmware);
-			}
-#endif
+		for (i = 0; i < num_tcslots; i++) {
+			if (!tc_bus[i].base_addr)
+				continue;
+			pr_info("    slot %d: %s %s %s\n", i, tc_bus[i].vendor,
+				tc_bus[i].name, tc_bus[i].firmware);
+		}
 	}
 
 	return 0;
@@ -258,4 +253,3 @@ EXPORT_SYMBOL(release_tc_card);
 EXPORT_SYMBOL(get_tc_base_addr);
 EXPORT_SYMBOL(get_tc_irq_nr);
 EXPORT_SYMBOL(get_tc_speed);
-EXPORT_SYMBOL(system_base);

drivers/tc/zs.c

@@ -65,14 +65,14 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
-#include <asm/dec/serial.h>
 
-#ifdef CONFIG_MACH_DECSTATION
 #include <asm/dec/interrupts.h>
+#include <asm/dec/ioasic_addrs.h>
 #include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
+#include <asm/dec/system.h>
 #include <asm/dec/tc.h>
-#include <asm/dec/ioasic_addrs.h>
-#endif
+
 #ifdef CONFIG_KGDB
 #include <asm/kgdb.h>
 #endif
@@ -1616,30 +1616,22 @@ static void __init probe_sccs(void)
 		return;
 	}
 
-	/*
-	 * When serial console is activated, tc_init has not been called yet
-	 * and system_base is undefined. Unfortunately we have to hardcode
-	 * system_base for this case :-(. HK
-	 */
 	switch(mips_machtype) {
 #ifdef CONFIG_MACH_DECSTATION
 	case MACH_DS5000_2X0:
 	case MACH_DS5900:
-		system_base = CKSEG1ADDR(0x1f800000);
 		n_chips = 2;
 		zs_parms = &ds_parms;
 		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
 		zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
 		break;
 	case MACH_DS5000_1XX:
-		system_base = CKSEG1ADDR(0x1c000000);
 		n_chips = 2;
 		zs_parms = &ds_parms;
 		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
 		zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
 		break;
 	case MACH_DS5000_XX:
-		system_base = CKSEG1ADDR(0x1c000000);
 		n_chips = 1;
 		zs_parms = &ds_parms;
 		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
@@ -1661,10 +1653,10 @@ static void __init probe_sccs(void)
 			 * The sccs reside on the high byte of the 16 bit IOBUS
 			 */
 			zs_channels[n_channels].control =
-				(volatile unsigned char *)system_base +
+				(volatile void *)CKSEG1ADDR(dec_kn_slot_base +
 			  (0 == chip ? zs_parms->scc0 : zs_parms->scc1) +
 			  (0 == channel ? zs_parms->channel_a_offset :
-			                  zs_parms->channel_b_offset);
+			                  zs_parms->channel_b_offset));
 			zs_channels[n_channels].data =
 				zs_channels[n_channels].control + 4;
 

include/asm-mips/dec/ioasic_addrs.h

@@ -45,7 +45,8 @@
 
 
 /*
- * Offsets for I/O ASIC registers (relative to (system_base + IOASIC_IOCTL)).
+ * Offsets for I/O ASIC registers
+ * (relative to (dec_kn_slot_base + IOASIC_IOCTL)).
  */
 					/* all systems */
 #define IO_REG_SCSI_DMA_P	0x00	/* SCSI DMA Pointer */

include/asm-mips/dec/kn01.h

@@ -13,9 +13,7 @@
 #ifndef __ASM_MIPS_DEC_KN01_H
 #define __ASM_MIPS_DEC_KN01_H
 
-#include <asm/addrspace.h>
-
-#define KN01_SLOT_BASE	CKSEG1ADDR(0x10000000)
+#define KN01_SLOT_BASE	0x10000000
 #define KN01_SLOT_SIZE	0x01000000
 
 /*
@@ -40,18 +38,10 @@
 #define KN01_SYS_ROM	(15*KN01_SLOT_SIZE)	/* system board ROM */
 
 
-/*
- * Some port addresses...
- */
-#define KN01_LANCE_BASE (KN01_SLOT_BASE + KN01_LANCE)	/* 0xB8000000 */
-#define KN01_DZ11_BASE	(KN01_SLOT_BASE + KN01_DZ11)	/* 0xBC000000 */
-#define KN01_RTC_BASE	(KN01_SLOT_BASE + KN01_RTC)	/* 0xBD000000 */
-
-
 /*
  * Frame buffer memory address.
  */
-#define KN01_VFB_MEM	CKSEG1ADDR(0x0fc00000)
+#define KN01_VFB_MEM	0x0fc00000
 
 /*
  * CPU interrupt bits.

include/asm-mips/dec/kn02.h

@@ -13,11 +13,7 @@
 #ifndef __ASM_MIPS_DEC_KN02_H
 #define __ASM_MIPS_DEC_KN02_H
 
-#include <asm/addrspace.h>
-#include <asm/dec/ecc.h>
-
-
-#define KN02_SLOT_BASE	CKSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_BASE	0x1fc00000
 #define KN02_SLOT_SIZE	0x00080000
 
 /*
@@ -33,14 +29,6 @@
 #define KN02_SYS_ROM_7	(7*KN02_SLOT_SIZE)	/* system board ROM (alias) */
 
 
-/*
- * Some port addresses...
- */
-#define KN02_DZ11_BASE	(KN02_SLOT_BASE + KN02_DZ11)	/* DZ11 */
-#define KN02_RTC_BASE	(KN02_SLOT_BASE + KN02_RTC)	/* RTC */
-#define KN02_CSR_BASE	(KN02_SLOT_BASE + KN02_CSR)	/* CSR */
-
-
 /*
  * System Control & Status Register bits.
  */

include/asm-mips/dec/kn02xa.h

@@ -17,31 +17,23 @@
 #ifndef __ASM_MIPS_DEC_KN02XA_H
 #define __ASM_MIPS_DEC_KN02XA_H
 
-#include <asm/addrspace.h>
 #include <asm/dec/ioasic_addrs.h>
 
-#define KN02XA_SLOT_BASE	CKSEG1ADDR(0x1c000000)
-
-/*
- * Some port addresses...
- */
-#define KN02XA_IOASIC_BASE    (KN02XA_SLOT_BASE + IOASIC_IOCTL)	/* I/O ASIC */
-#define KN02XA_RTC_BASE		(KN02XA_SLOT_BASE + IOASIC_TOY)	/* RTC */
-
+#define KN02XA_SLOT_BASE	0x1c000000
 
 /*
  * Memory control ASIC registers.
  */
-#define KN02XA_MER	CKSEG1ADDR(0x0c400000)	/* memory error register */
-#define KN02XA_MSR	CKSEG1ADDR(0x0c800000)	/* memory size register */
+#define KN02XA_MER		0x0c400000	/* memory error register */
+#define KN02XA_MSR		0x0c800000	/* memory size register */
 
 /*
  * CPU control ASIC registers.
  */
-#define KN02XA_MEM_CONF	CKSEG1ADDR(0x0e000000)	/* write timeout config */
-#define KN02XA_EAR	CKSEG1ADDR(0x0e000004)	/* error address register */
-#define KN02XA_BOOT0	CKSEG1ADDR(0x0e000008)	/* boot 0 register */
-#define KN02XA_MEM_INTR	CKSEG1ADDR(0x0e00000c)	/* write err IRQ stat & ack */
+#define KN02XA_MEM_CONF		0x0e000000	/* write timeout config */
+#define KN02XA_EAR		0x0e000004	/* error address register */
+#define KN02XA_BOOT0		0x0e000008	/* boot 0 register */
+#define KN02XA_MEM_INTR		0x0e00000c	/* write err IRQ stat & ack */
 
 /*
  * Memory Error Register bits, common definitions.

include/asm-mips/dec/kn03.h

@@ -10,24 +10,15 @@
  *
  * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
  * are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005  Maciej W. Rozycki
  */
 #ifndef __ASM_MIPS_DEC_KN03_H
 #define __ASM_MIPS_DEC_KN03_H
 
-#include <asm/addrspace.h>
 #include <asm/dec/ecc.h>
 #include <asm/dec/ioasic_addrs.h>
 
-#define KN03_SLOT_BASE	CKSEG1ADDR(0x1f800000)
-
-/*
- * Some port addresses...
- */
-#define KN03_IOASIC_BASE	(KN03_SLOT_BASE + IOASIC_IOCTL)	/* I/O ASIC */
-#define KN03_RTC_BASE		(KN03_SLOT_BASE + IOASIC_TOY)	/* RTC */
-#define KN03_MCR_BASE		(KN03_SLOT_BASE + IOASIC_MCR)	/* MCR */
-
+#define KN03_SLOT_BASE		0x1f800000
 
 /*
  * CPU interrupt bits.

include/asm-mips/dec/kn05.h

@@ -21,7 +21,6 @@
 #ifndef __ASM_MIPS_DEC_KN05_H
 #define __ASM_MIPS_DEC_KN05_H
 
-#include <asm/addrspace.h>
 #include <asm/dec/ioasic_addrs.h>
 
 /*
@@ -30,7 +29,7 @@
  * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
  * Others are handled locally.  "Low" slots are always passed.
  */
-#define KN4K_SLOT_BASE	KSEG1ADDR(0x1fc00000)
+#define KN4K_SLOT_BASE	0x1fc00000
 
 #define KN4K_MB_ROM	(0*IOASIC_SLOT_SIZE)	/* KN05/KN04 card ROM */
 #define KN4K_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */

include/asm-mips/dec/system.h

+/*
+ *	include/asm-mips/dec/system.h
+ *
+ *	Generic DECstation/DECsystem bits.
+ *
+ *	Copyright (C) 2005  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_DEC_SYSTEM_H
+#define __ASM_DEC_SYSTEM_H
+
+extern unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+#endif /* __ASM_DEC_SYSTEM_H */

include/asm-mips/dec/tc.h

@@ -7,10 +7,8 @@
  *
  * Copyright (c) 1998 Harald Koerfgen
  */
-#ifndef ASM_TC_H
-#define ASM_TC_H
-
-extern unsigned long system_base;
+#ifndef __ASM_DEC_TC_H
+#define __ASM_DEC_TC_H
 
 /*
  * Search for a TURBOchannel Option Module
@@ -36,8 +34,8 @@ extern unsigned long get_tc_base_addr(int);
  */
 extern unsigned long get_tc_irq_nr(int);
 /*
- * Return TURBOchannel clock frequency in hz
+ * Return TURBOchannel clock frequency in Hz
  */
 extern unsigned long get_tc_speed(void);
 
-#endif
+#endif /* __ASM_DEC_TC_H */

include/asm-mips/mach-dec/mc146818rtc.h

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 1998, 2001 by Ralf Baechle
  * Copyright (C) 1998 by Harald Koerfgen
- * Copyright (C) 2002  Maciej W. Rozycki
+ * Copyright (C) 2002, 2005  Maciej W. Rozycki
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -14,23 +14,18 @@
 #define __ASM_MIPS_DEC_RTC_DEC_H
 
 #include <linux/types.h>
-
 #include <asm/addrspace.h>
+#include <asm/dec/system.h>
 
 extern volatile u8 *dec_rtc_base;
-extern unsigned long dec_kn_slot_size;
 
-#define RTC_PORT(x)	CPHYSADDR(dec_rtc_base)
+#define RTC_PORT(x)	CPHYSADDR((long)dec_rtc_base)
 #define RTC_IO_EXTENT	dec_kn_slot_size
 #define RTC_IOMAPPED	0
 #undef RTC_IRQ
 
 #define RTC_DEC_YEAR	0x3f	/* Where we store the real year on DECs.  */
 
-#include <linux/mc146818rtc.h>
-#include <linux/module.h>
-#include <linux/types.h>
-
 static inline unsigned char CMOS_READ(unsigned long addr)
 {
 	return dec_rtc_base[addr * 4];