b43: HT-PHY: correct 0x2059 radio init

Sometimes additional steps are performed while initializing 2059 radio.
We did not find the condition yet, so make it always true for now.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_ht.c

@@ -86,7 +86,10 @@ static void b43_radio_2059_channel_setup(struct b43_wldev *dev,
 static void b43_radio_2059_init(struct b43_wldev *dev)
 {
 	const u16 routing[] = { R2059_SYN, R2059_TXRX0, R2059_RXRX1 };
-	u8 i;
+	const u16 radio_values[3][2] = {
+		{ 0x61, 0xE9 }, { 0x69, 0xD5 }, { 0x73, 0x99 },
+	};
+	u16 i, j;
 
 	b43_radio_write(dev, R2059_ALL | 0x51, 0x0070);
 	b43_radio_write(dev, R2059_ALL | 0x5a, 0x0003);
@@ -100,6 +103,51 @@ static void b43_radio_2059_init(struct b43_wldev *dev)
 	b43_radio_mask(dev, 0x2e, ~0x0078);
 	b43_radio_mask(dev, 0xc0, ~0x0080);
 
+	if (1) { /* FIXME */
+		b43_radio_set(dev, R2059_RXRX1 | 0x4, 0x1);
+		udelay(10);
+		b43_radio_set(dev, R2059_RXRX1 | 0x0BF, 0x1);
+		b43_radio_maskset(dev, R2059_RXRX1 | 0x19B, 0x3, 0x2);
+
+		b43_radio_set(dev, R2059_RXRX1 | 0x4, 0x2);
+		udelay(100);
+		b43_radio_mask(dev, R2059_RXRX1 | 0x4, ~0x2);
+
+		for (i = 0; i < 10000; i++) {
+			if (b43_radio_read(dev, R2059_RXRX1 | 0x145) & 1) {
+				i = 0;
+				break;
+			}
+			udelay(100);
+		}
+		if (i)
+			b43err(dev->wl, "radio 0x945 timeout\n");
+
+		b43_radio_mask(dev, R2059_RXRX1 | 0x4, ~0x1);
+		b43_radio_set(dev, 0xa, 0x60);
+
+		for (i = 0; i < 3; i++) {
+			b43_radio_write(dev, 0x17F, radio_values[i][0]);
+			b43_radio_write(dev, 0x13D, 0x6E);
+			b43_radio_write(dev, 0x13E, radio_values[i][1]);
+			b43_radio_write(dev, 0x13C, 0x55);
+
+			for (j = 0; j < 10000; j++) {
+				if (b43_radio_read(dev, 0x140) & 2) {
+					j = 0;
+					break;
+				}
+				udelay(500);
+			}
+			if (j)
+				b43err(dev->wl, "radio 0x140 timeout\n");
+
+			b43_radio_write(dev, 0x13C, 0x15);
+		}
+
+		b43_radio_mask(dev, 0x17F, ~0x1);
+	}
+
 	b43_radio_mask(dev, 0x11, 0x0008);
 }