提交 a48709c5 编写于 作者: E Emmanuel Grumbach 提交者: Wey-Yi Guy

iwlagn: introduce iwl_bus and iwl_bus_ops

iwl_bus will represent a bus, and iwl_bus_ops all the operations that can be
done on this bus.
For the moment only set_prv_data is implemented. More to come...
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
上级 c6ca8bc4
......@@ -3479,7 +3479,8 @@ static void iwl_init_context(struct iwl_priv *priv)
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
}
int iwl_probe(struct pci_dev *pdev, struct iwl_cfg *cfg)
int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
struct iwl_cfg *cfg)
{
int err = 0;
struct iwl_priv *priv;
......@@ -3490,12 +3491,23 @@ int iwl_probe(struct pci_dev *pdev, struct iwl_cfg *cfg)
/************************
* 1. Allocating HW data
************************/
/* TODO: remove this nasty hack when PCI encapsulation is done
* assumes that struct pci_dev * is at the very beginning of whatever
* is pointed by bus_specific */
unsigned long *ppdev = bus_specific;
struct pci_dev *pdev = (struct pci_dev *) *ppdev;
hw = iwl_alloc_all(cfg);
if (!hw) {
err = -ENOMEM;
goto out; }
priv = hw->priv;
priv->bus.priv = priv;
priv->bus.bus_specific = bus_specific;
priv->bus.ops = bus_ops;
priv->bus.ops->set_drv_data(&priv->bus, priv);
/* At this point both hw and priv are allocated. */
SET_IEEE80211_DEV(hw, &pdev->dev);
......@@ -3549,9 +3561,6 @@ int iwl_probe(struct pci_dev *pdev, struct iwl_cfg *cfg)
if (err)
goto out_pci_disable_device;
pci_set_drvdata(pdev, priv);
/***********************
* 3. Read REV register
***********************/
......@@ -3705,7 +3714,7 @@ int iwl_probe(struct pci_dev *pdev, struct iwl_cfg *cfg)
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
pci_set_drvdata(pdev, NULL);
priv->bus.ops->set_drv_data(&priv->bus, NULL);
pci_release_regions(pdev);
out_pci_disable_device:
pci_disable_device(pdev);
......@@ -3716,14 +3725,11 @@ int iwl_probe(struct pci_dev *pdev, struct iwl_cfg *cfg)
return err;
}
void __devexit iwl_remove(struct pci_dev *pdev)
void __devexit iwl_remove(struct iwl_priv * priv)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
struct pci_dev *pdev = priv->pci_dev;
unsigned long flags;
if (!priv)
return;
wait_for_completion(&priv->_agn.firmware_loading_complete);
IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
......@@ -3783,7 +3789,7 @@ void __devexit iwl_remove(struct pci_dev *pdev)
pci_iounmap(pdev, priv->hw_base);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
priv->bus.ops->set_drv_data(&priv->bus, NULL);
iwl_uninit_drv(priv);
......
......@@ -379,7 +379,8 @@ void iwl_testmode_cleanup(struct iwl_priv *priv)
}
#endif
int iwl_probe(struct pci_dev *pdev, struct iwl_cfg *cfg);
void iwl_remove(struct pci_dev *pdev);
int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
struct iwl_cfg *cfg);
void __devexit iwl_remove(struct iwl_priv * priv);
#endif /* __iwl_agn_h__ */
......@@ -1188,6 +1188,26 @@ struct iwl_testmode_trace {
bool trace_enabled;
};
#endif
struct iwl_bus;
/**
* struct iwl_bus_ops - bus specific operations
* @set_drv_data: set the priv pointer to the bus layer
*/
struct iwl_bus_ops {
void (*set_drv_data)(struct iwl_bus *bus, void *priv);
};
struct iwl_bus {
/* pointer to bus specific struct */
void *bus_specific;
/* Common data to all buses */
struct iwl_priv *priv; /* driver's context */
struct iwl_bus_ops *ops;
};
struct iwl_priv {
/* ieee device used by generic ieee processing code */
......@@ -1255,12 +1275,15 @@ struct iwl_priv {
spinlock_t reg_lock; /* protect hw register access */
struct mutex mutex;
/* TODO: remove this after PCI abstraction is done */
/* basic pci-network driver stuff */
struct pci_dev *pci_dev;
/* pci hardware address support */
void __iomem *hw_base;
struct iwl_bus bus; /* bus specific data */
/* microcode/device supports multiple contexts */
u8 valid_contexts;
......
......@@ -67,6 +67,29 @@
#include "iwl-agn.h"
#include "iwl-core.h"
struct iwl_pci_bus {
/* basic pci-network driver stuff */
struct pci_dev *pci_dev;
/* pci hardware address support */
void __iomem *hw_base;
};
#define IWL_BUS_GET_PCI_BUS(_iwl_bus) \
((struct iwl_pci_bus *) ((_iwl_bus)->bus_specific))
#define IWL_BUS_GET_PCI_DEV(_iwl_bus) \
((IWL_BUS_GET_PCI_BUS(_iwl_bus))->pci_dev)
static void iwl_pci_set_drv_data(struct iwl_bus *bus, void *drv_priv)
{
pci_set_drvdata(IWL_BUS_GET_PCI_DEV(bus), drv_priv);
}
static struct iwl_bus_ops pci_ops = {
.set_drv_data = iwl_pci_set_drv_data,
};
#define IWL_PCI_DEVICE(dev, subdev, cfg) \
.vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = (subdev), \
......@@ -266,13 +289,38 @@ MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
return iwl_probe(pdev, cfg);
struct iwl_pci_bus *bus;
int err;
bus = kzalloc(sizeof(*bus), GFP_KERNEL);
if (!bus) {
pr_err("Couldn't allocate iwl_pci_bus");
err = -ENOMEM;
goto out_no_pci;
}
bus->pci_dev = pdev;
err = iwl_probe((void *) bus, &pci_ops, cfg);
if (err)
goto out_no_pci;
return 0;
out_no_pci:
kfree(bus);
return err;
}
static void __devexit iwl_pci_remove(struct pci_dev *pdev)
{
iwl_remove(pdev);
struct iwl_priv *priv = pci_get_drvdata(pdev);
/* This can happen if probe failed */
if (unlikely(!priv))
return;
iwl_remove(priv);
kfree(IWL_BUS_GET_PCI_BUS(&priv->bus));
}
#ifdef CONFIG_PM
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册