提交 a3accfd7 编写于 作者: H Hans de Goede 提交者: Bartlomiej Zolnierkiewicz

video: fbdev: simplefb: Separate clk / regulator get and enable steps

Currently when a simplefb needs both clocks and regulators and one
of the regulators returns -EPROBE_DEFER when we try to get it, we end
up disabling the clocks. This causes the screen to go blank; and in some
cases my cause hardware state to be lost resulting in the framebuffer not
working at all.

This commit splits the get and enable steps and only enables
clocks and regulators after successfully getting all of them,
fixing the disabling of the clocks which were left enabled by
the firmware setting up the simplefb.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
上级 8aac7f34
...@@ -180,10 +180,12 @@ static int simplefb_parse_pd(struct platform_device *pdev, ...@@ -180,10 +180,12 @@ static int simplefb_parse_pd(struct platform_device *pdev,
struct simplefb_par { struct simplefb_par {
u32 palette[PSEUDO_PALETTE_SIZE]; u32 palette[PSEUDO_PALETTE_SIZE];
#if defined CONFIG_OF && defined CONFIG_COMMON_CLK #if defined CONFIG_OF && defined CONFIG_COMMON_CLK
bool clks_enabled;
unsigned int clk_count; unsigned int clk_count;
struct clk **clks; struct clk **clks;
#endif #endif
#if defined CONFIG_OF && defined CONFIG_REGULATOR #if defined CONFIG_OF && defined CONFIG_REGULATOR
bool regulators_enabled;
u32 regulator_count; u32 regulator_count;
struct regulator **regulators; struct regulator **regulators;
#endif #endif
...@@ -208,12 +210,12 @@ struct simplefb_par { ...@@ -208,12 +210,12 @@ struct simplefb_par {
* the fb probe will not help us much either. So just complain and carry on, * the fb probe will not help us much either. So just complain and carry on,
* and hope that the user actually gets a working fb at the end of things. * and hope that the user actually gets a working fb at the end of things.
*/ */
static int simplefb_clocks_init(struct simplefb_par *par, static int simplefb_clocks_get(struct simplefb_par *par,
struct platform_device *pdev) struct platform_device *pdev)
{ {
struct device_node *np = pdev->dev.of_node; struct device_node *np = pdev->dev.of_node;
struct clk *clock; struct clk *clock;
int i, ret; int i;
if (dev_get_platdata(&pdev->dev) || !np) if (dev_get_platdata(&pdev->dev) || !np)
return 0; return 0;
...@@ -244,6 +246,14 @@ static int simplefb_clocks_init(struct simplefb_par *par, ...@@ -244,6 +246,14 @@ static int simplefb_clocks_init(struct simplefb_par *par,
par->clks[i] = clock; par->clks[i] = clock;
} }
return 0;
}
static void simplefb_clocks_enable(struct simplefb_par *par,
struct platform_device *pdev)
{
int i, ret;
for (i = 0; i < par->clk_count; i++) { for (i = 0; i < par->clk_count; i++) {
if (par->clks[i]) { if (par->clks[i]) {
ret = clk_prepare_enable(par->clks[i]); ret = clk_prepare_enable(par->clks[i]);
...@@ -256,8 +266,7 @@ static int simplefb_clocks_init(struct simplefb_par *par, ...@@ -256,8 +266,7 @@ static int simplefb_clocks_init(struct simplefb_par *par,
} }
} }
} }
par->clks_enabled = true;
return 0;
} }
static void simplefb_clocks_destroy(struct simplefb_par *par) static void simplefb_clocks_destroy(struct simplefb_par *par)
...@@ -269,7 +278,8 @@ static void simplefb_clocks_destroy(struct simplefb_par *par) ...@@ -269,7 +278,8 @@ static void simplefb_clocks_destroy(struct simplefb_par *par)
for (i = 0; i < par->clk_count; i++) { for (i = 0; i < par->clk_count; i++) {
if (par->clks[i]) { if (par->clks[i]) {
clk_disable_unprepare(par->clks[i]); if (par->clks_enabled)
clk_disable_unprepare(par->clks[i]);
clk_put(par->clks[i]); clk_put(par->clks[i]);
} }
} }
...@@ -277,8 +287,10 @@ static void simplefb_clocks_destroy(struct simplefb_par *par) ...@@ -277,8 +287,10 @@ static void simplefb_clocks_destroy(struct simplefb_par *par)
kfree(par->clks); kfree(par->clks);
} }
#else #else
static int simplefb_clocks_init(struct simplefb_par *par, static int simplefb_clocks_get(struct simplefb_par *par,
struct platform_device *pdev) { return 0; } struct platform_device *pdev) { return 0; }
static void simplefb_clocks_enable(struct simplefb_par *par,
struct platform_device *pdev) { }
static void simplefb_clocks_destroy(struct simplefb_par *par) { } static void simplefb_clocks_destroy(struct simplefb_par *par) { }
#endif #endif
...@@ -305,14 +317,14 @@ static void simplefb_clocks_destroy(struct simplefb_par *par) { } ...@@ -305,14 +317,14 @@ static void simplefb_clocks_destroy(struct simplefb_par *par) { }
* the fb probe will not help us much either. So just complain and carry on, * the fb probe will not help us much either. So just complain and carry on,
* and hope that the user actually gets a working fb at the end of things. * and hope that the user actually gets a working fb at the end of things.
*/ */
static int simplefb_regulators_init(struct simplefb_par *par, static int simplefb_regulators_get(struct simplefb_par *par,
struct platform_device *pdev) struct platform_device *pdev)
{ {
struct device_node *np = pdev->dev.of_node; struct device_node *np = pdev->dev.of_node;
struct property *prop; struct property *prop;
struct regulator *regulator; struct regulator *regulator;
const char *p; const char *p;
int count = 0, i = 0, ret; int count = 0, i = 0;
if (dev_get_platdata(&pdev->dev) || !np) if (dev_get_platdata(&pdev->dev) || !np)
return 0; return 0;
...@@ -354,6 +366,14 @@ static int simplefb_regulators_init(struct simplefb_par *par, ...@@ -354,6 +366,14 @@ static int simplefb_regulators_init(struct simplefb_par *par,
} }
par->regulator_count = i; par->regulator_count = i;
return 0;
}
static void simplefb_regulators_enable(struct simplefb_par *par,
struct platform_device *pdev)
{
int i, ret;
/* Enable all the regulators */ /* Enable all the regulators */
for (i = 0; i < par->regulator_count; i++) { for (i = 0; i < par->regulator_count; i++) {
ret = regulator_enable(par->regulators[i]); ret = regulator_enable(par->regulators[i]);
...@@ -365,15 +385,14 @@ static int simplefb_regulators_init(struct simplefb_par *par, ...@@ -365,15 +385,14 @@ static int simplefb_regulators_init(struct simplefb_par *par,
par->regulators[i] = NULL; par->regulators[i] = NULL;
} }
} }
par->regulators_enabled = true;
return 0;
} }
static void simplefb_regulators_destroy(struct simplefb_par *par) static void simplefb_regulators_destroy(struct simplefb_par *par)
{ {
int i; int i;
if (!par->regulators) if (!par->regulators || !par->regulators_enabled)
return; return;
for (i = 0; i < par->regulator_count; i++) for (i = 0; i < par->regulator_count; i++)
...@@ -381,8 +400,10 @@ static void simplefb_regulators_destroy(struct simplefb_par *par) ...@@ -381,8 +400,10 @@ static void simplefb_regulators_destroy(struct simplefb_par *par)
regulator_disable(par->regulators[i]); regulator_disable(par->regulators[i]);
} }
#else #else
static int simplefb_regulators_init(struct simplefb_par *par, static int simplefb_regulators_get(struct simplefb_par *par,
struct platform_device *pdev) { return 0; } struct platform_device *pdev) { return 0; }
static void simplefb_regulators_enable(struct simplefb_par *par,
struct platform_device *pdev) { }
static void simplefb_regulators_destroy(struct simplefb_par *par) { } static void simplefb_regulators_destroy(struct simplefb_par *par) { }
#endif #endif
...@@ -453,14 +474,17 @@ static int simplefb_probe(struct platform_device *pdev) ...@@ -453,14 +474,17 @@ static int simplefb_probe(struct platform_device *pdev)
} }
info->pseudo_palette = par->palette; info->pseudo_palette = par->palette;
ret = simplefb_clocks_init(par, pdev); ret = simplefb_clocks_get(par, pdev);
if (ret < 0) if (ret < 0)
goto error_unmap; goto error_unmap;
ret = simplefb_regulators_init(par, pdev); ret = simplefb_regulators_get(par, pdev);
if (ret < 0) if (ret < 0)
goto error_clocks; goto error_clocks;
simplefb_clocks_enable(par, pdev);
simplefb_regulators_enable(par, pdev);
dev_info(&pdev->dev, "framebuffer at 0x%lx, 0x%x bytes, mapped to 0x%p\n", dev_info(&pdev->dev, "framebuffer at 0x%lx, 0x%x bytes, mapped to 0x%p\n",
info->fix.smem_start, info->fix.smem_len, info->fix.smem_start, info->fix.smem_len,
info->screen_base); info->screen_base);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册