[SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers

Individual WWN read operations based on controller.
PM8081 - Read WWN from Flash VPD.
PM8088/89 - Read WWN from EEPROM.
PM8001 - Read WWN from NVM.
Signed-off-by: NSakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: NAnand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: NJack Wang <jack_wang@usish.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/pm8001/pm8001_init.c

@@ -605,21 +605,50 @@ static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
  */
 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 {
-	u8 i;
+	u8 i, j;
 #ifdef PM8001_READ_VPD
+	/* For new SPC controllers WWN is stored in flash vpd
+	*  For SPC/SPCve controllers WWN is stored in EEPROM
+	*  For Older SPC WWN is stored in NVMD
+	*/
 	DECLARE_COMPLETION_ONSTACK(completion);
 	struct pm8001_ioctl_payload payload;
+	u16 deviceid;
+	pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
 	pm8001_ha->nvmd_completion = &completion;
-	payload.minor_function = 0;
-	payload.length = 128;
-	payload.func_specific = kzalloc(128, GFP_KERNEL);
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		if (deviceid == 0x8081) {
+			payload.minor_function = 4;
+			payload.length = 4096;
+		} else {
+			payload.minor_function = 0;
+			payload.length = 128;
+		}
+	} else {
+		payload.minor_function = 1;
+		payload.length = 4096;
+	}
+	payload.offset = 0;
+	payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
 	PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 	wait_for_completion(&completion);
+
+	for (i = 0, j = 0; i <= 7; i++, j++) {
+		if (pm8001_ha->chip_id == chip_8001) {
+			if (deviceid == 0x8081)
+				pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x704 + i];
+		} else
+			pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x804 + i];
+	}
+
 	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
-		memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
-			SAS_ADDR_SIZE);
+		memcpy(&pm8001_ha->phy[i].dev_sas_addr,
+			pm8001_ha->sas_addr, SAS_ADDR_SIZE);
 		PM8001_INIT_DBG(pm8001_ha,
-			pm8001_printk("phy %d sas_addr = %016llx \n", i,
+			pm8001_printk("phy %d sas_addr = %016llx\n", i,
 			pm8001_ha->phy[i].dev_sas_addr));
 	}
 #else