Merge tag 'regulator-fix-v4.7-rc5' of...

Merge tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two small fixes for the regulator subsystem - one fixing a crash with
  one of the devices supported by the max77620 driver, another fixing
  startup for the anatop regulator when it starts up with the regulator
  in bypass mode"

* tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max77620: check for valid regulator info
  regulator: anatop: allow regulator to be in bypass mode

drivers/regulator/anatop-regulator.c

@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}

drivers/regulator/max77620-regulator.c

@@ -123,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic,
 	unsigned int val;
 	int ret;
 
+	if (!rinfo)
+		return 0;
+
 	switch (fps_src) {
 	case MAX77620_FPS_SRC_0:
 	case MAX77620_FPS_SRC_1:
@@ -171,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic,
 	int pd = rpdata->active_fps_pd_slot;
 	int ret = 0;
 
+	if (!rinfo)
+		return 0;
+
 	if (is_suspend) {
 		pu = rpdata->suspend_fps_pu_slot;
 		pd = rpdata->suspend_fps_pd_slot;
@@ -680,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = {
 	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1),
 	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
 	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
-	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
 
 	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
 	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),