提交 a24058f9 编写于 作者: T Tej Parkash 提交者: James Bottomley

[SCSI] qla4xxx: Fixed request queue count manipulation on response path

Issue:
Request queue count holds the information about free space in request queue
which has to be manipulated based on request in and out pointer.
But in driver response path, this count was incremented unconditionally,
which could move req_in pointer beyond req_out pointer.
This scenario leads fw hang during IO.

Solution:
Request queue count manipulation has to be done in IO path only, keeping
req_in and req_out pointer two IOCB count away
Signed-off-by: NTej Parkash <tej.parkash@qlogic.com>
Signed-off-by: NShyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
上级 33338e31
......@@ -224,8 +224,6 @@ void qla4_83xx_interrupt_service_routine(struct scsi_qla_host *ha,
int qla4_83xx_isp_reset(struct scsi_qla_host *ha);
void qla4_83xx_queue_iocb(struct scsi_qla_host *ha);
void qla4_83xx_complete_iocb(struct scsi_qla_host *ha);
uint16_t qla4_83xx_rd_shdw_req_q_out(struct scsi_qla_host *ha);
uint16_t qla4_83xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha);
uint32_t qla4_83xx_rd_reg(struct scsi_qla_host *ha, ulong addr);
void qla4_83xx_wr_reg(struct scsi_qla_host *ha, ulong addr, uint32_t val);
int qla4_83xx_rd_reg_indirect(struct scsi_qla_host *ha, uint32_t addr,
......
......@@ -396,7 +396,6 @@ static void qla4xxx_passthru_status_entry(struct scsi_qla_host *ha,
task_data = task->dd_data;
memcpy(&task_data->sts, sts_entry, sizeof(struct passthru_status));
ha->req_q_count += task_data->iocb_req_cnt;
ha->iocb_cnt -= task_data->iocb_req_cnt;
queue_work(ha->task_wq, &task_data->task_work);
}
......@@ -416,7 +415,6 @@ static struct mrb *qla4xxx_del_mrb_from_active_array(struct scsi_qla_host *ha,
return mrb;
/* update counters */
ha->req_q_count += mrb->iocb_cnt;
ha->iocb_cnt -= mrb->iocb_cnt;
return mrb;
......
......@@ -3751,8 +3751,8 @@ static struct isp_operations qla4_83xx_isp_ops = {
.reset_firmware = qla4_8xxx_stop_firmware,
.queue_iocb = qla4_83xx_queue_iocb,
.complete_iocb = qla4_83xx_complete_iocb,
.rd_shdw_req_q_out = qla4_83xx_rd_shdw_req_q_out,
.rd_shdw_rsp_q_in = qla4_83xx_rd_shdw_rsp_q_in,
.rd_shdw_req_q_out = qla4xxx_rd_shdw_req_q_out,
.rd_shdw_rsp_q_in = qla4xxx_rd_shdw_rsp_q_in,
.get_sys_info = qla4_8xxx_get_sys_info,
.rd_reg_direct = qla4_83xx_rd_reg,
.wr_reg_direct = qla4_83xx_wr_reg,
......@@ -3775,11 +3775,6 @@ uint16_t qla4_82xx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
return (uint16_t)le32_to_cpu(readl(&ha->qla4_82xx_reg->req_q_out));
}
uint16_t qla4_83xx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(readl(&ha->qla4_83xx_reg->req_q_out));
}
uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in);
......@@ -3790,11 +3785,6 @@ uint16_t qla4_82xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
return (uint16_t)le32_to_cpu(readl(&ha->qla4_82xx_reg->rsp_q_in));
}
uint16_t qla4_83xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(readl(&ha->qla4_83xx_reg->rsp_q_in));
}
static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf)
{
struct scsi_qla_host *ha = data;
......@@ -5683,7 +5673,6 @@ struct srb *qla4xxx_del_from_active_array(struct scsi_qla_host *ha,
/* update counters */
if (srb->flags & SRB_DMA_VALID) {
ha->req_q_count += srb->iocb_cnt;
ha->iocb_cnt -= srb->iocb_cnt;
if (srb->cmd)
srb->cmd->host_scribble =
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册