提交 a1377e53 编写于 作者: L Lu Baolu 提交者: Greg Kroah-Hartman

usb: xhci: rework root port wake bits if controller isn't allowed to wakeup

When system is being suspended, if host device is not allowed to do wakeup,
xhci_suspend() needs to clear all root port wake on bits. Otherwise, some
platforms may generate spurious wakeup, even if PCI PME# is disabled.

The initial commit ff8cbf25 ("xhci: clear root port wake on bits"),
which also got into stable, turned out to not work correctly and had to
be reverted, and is now rewritten.

Cc: stable <stable@vger.kernel.org> # v3.2+
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Suggested-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
[Mathias Nyman: reword commit message]
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 8e71a322
......@@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
pdev->no_d3cold = true;
return xhci_suspend(xhci);
return xhci_suspend(xhci, do_wakeup);
}
static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
......
......@@ -204,7 +204,15 @@ static int xhci_plat_suspend(struct device *dev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_suspend(xhci);
/*
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
* to do wakeup during suspend. Since xhci_plat_suspend is currently
* only designed for system suspend, device_may_wakeup() is enough
* to dertermine whether host is allowed to do wakeup. Need to
* reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
* also applies to runtime suspend.
*/
return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int xhci_plat_resume(struct device *dev)
......
......@@ -35,6 +35,8 @@
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
static int link_quirk;
module_param(link_quirk, int, S_IRUGO | S_IWUSR);
......@@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
xhci_set_cmd_ring_deq(xhci);
}
static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
{
int port_index;
__le32 __iomem **port_array;
unsigned long flags;
u32 t1, t2;
spin_lock_irqsave(&xhci->lock, flags);
/* disble usb3 ports Wake bits*/
port_index = xhci->num_usb3_ports;
port_array = xhci->usb3_ports;
while (port_index--) {
t1 = readl(port_array[port_index]);
t1 = xhci_port_state_to_neutral(t1);
t2 = t1 & ~PORT_WAKE_BITS;
if (t1 != t2)
writel(t2, port_array[port_index]);
}
/* disble usb2 ports Wake bits*/
port_index = xhci->num_usb2_ports;
port_array = xhci->usb2_ports;
while (port_index--) {
t1 = readl(port_array[port_index]);
t1 = xhci_port_state_to_neutral(t1);
t2 = t1 & ~PORT_WAKE_BITS;
if (t1 != t2)
writel(t2, port_array[port_index]);
}
spin_unlock_irqrestore(&xhci->lock, flags);
}
/*
* Stop HC (not bus-specific)
*
* This is called when the machine transition into S3/S4 mode.
*
*/
int xhci_suspend(struct xhci_hcd *xhci)
int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
{
int rc = 0;
unsigned int delay = XHCI_MAX_HALT_USEC;
......@@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
/* Clear root port wake on bits if wakeup not allowed. */
if (!do_wakeup)
xhci_disable_port_wake_on_bits(xhci);
/* Don't poll the roothubs on bus suspend. */
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
......
......@@ -1746,7 +1746,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *));
#ifdef CONFIG_PM
int xhci_suspend(struct xhci_hcd *xhci);
int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
#else
#define xhci_suspend NULL
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册