提交 a0edcdbe 编写于 作者: G Govindraj.R 提交者: Kevin Hilman

OMAP clock: Add uart4_ick/fck definitions for 3630

This is only valid for omap 36xx family of chips.
Signed-off-by: NSergio Aguirre <saaguirre@ti.com>
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>
Acked-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
上级 8da37d9d
......@@ -2465,6 +2465,16 @@ static struct clk uart3_fck = {
.recalc = &followparent_recalc,
};
static struct clk uart4_fck = {
.name = "uart4_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &per_48m_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3630_EN_UART4_SHIFT,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_fck = {
.name = "gpt2_fck",
.ops = &clkops_omap2_dflt_wait,
......@@ -2715,6 +2725,16 @@ static struct clk uart3_ick = {
.recalc = &followparent_recalc,
};
static struct clk uart4_ick = {
.name = "uart4_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3630_EN_UART4_SHIFT,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt9_ick = {
.name = "gpt9_ick",
.ops = &clkops_omap2_dflt_wait,
......@@ -3349,6 +3369,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX),
CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),
......@@ -3372,6 +3393,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX),
CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX),
CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX),
CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX),
CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX),
CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX),
CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册