drm/radeon: Remove a bunch of useless _iomem casts

Just defining rdev->rmmio properly in the first place should do
the trick. In some cases, the cast were also complete dups as
the original variable was already of the right type.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drivers/gpu/drm/radeon/radeon.h

@@ -1177,7 +1177,7 @@ struct radeon_device {
 	/* Register mmio */
 	resource_size_t			rmmio_base;
 	resource_size_t			rmmio_size;
-	void				*rmmio;
+	void __iomem			*rmmio;
 	radeon_rreg_t			mc_rreg;
 	radeon_wreg_t			mc_wreg;
 	radeon_rreg_t			pll_rreg;
@@ -1254,20 +1254,20 @@ int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
 static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	if (reg < rdev->rmmio_size)
-		return readl(((void __iomem *)rdev->rmmio) + reg);
+		return readl((rdev->rmmio) + reg);
 	else {
-		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
-		return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+		writel(reg, (rdev->rmmio) + RADEON_MM_INDEX);
+		return readl((rdev->rmmio) + RADEON_MM_DATA);
 	}
 }
 
 static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
 	if (reg < rdev->rmmio_size)
-		writel(v, ((void __iomem *)rdev->rmmio) + reg);
+		writel(v, (rdev->rmmio) + reg);
 	else {
-		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
-		writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+		writel(reg, (rdev->rmmio) + RADEON_MM_INDEX);
+		writel(v, (rdev->rmmio) + RADEON_MM_DATA);
 	}
 }
 
@@ -1299,10 +1299,10 @@ static inline void r100_io_wreg(struct radeon_device *rdev, u32 reg, u32 v)
 /*
  * Registers read & write functions.
  */
-#define RREG8(reg) readb(((void __iomem *)rdev->rmmio) + (reg))
-#define WREG8(reg, v) writeb(v, ((void __iomem *)rdev->rmmio) + (reg))
-#define RREG16(reg) readw(((void __iomem *)rdev->rmmio) + (reg))
-#define WREG16(reg, v) writew(v, ((void __iomem *)rdev->rmmio) + (reg))
+#define RREG8(reg) readb((rdev->rmmio) + (reg))
+#define WREG8(reg, v) writeb(v, (rdev->rmmio) + (reg))
+#define RREG16(reg) readw((rdev->rmmio) + (reg))
+#define WREG16(reg, v) writew(v, (rdev->rmmio) + (reg))
 #define RREG32(reg) r100_mm_rreg(rdev, (reg))
 #define DREG32(reg) printk(KERN_INFO "REGISTER: " #reg " : 0x%08X\n", r100_mm_rreg(rdev, (reg)))
 #define WREG32(reg, v) r100_mm_wreg(rdev, (reg), (v))

drivers/gpu/drm/radeon/rs600.c

@@ -530,7 +530,7 @@ int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	addr = addr & 0xFFFFFFFFFFFFF000ULL;
 	addr |= R600_PTE_VALID | R600_PTE_SYSTEM | R600_PTE_SNOOPED;
 	addr |= R600_PTE_READABLE | R600_PTE_WRITEABLE;
-	writeq(addr, ((void __iomem *)ptr) + (i * 8));
+	writeq(addr, ptr + (i * 8));
 	return 0;
 }