Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6 of HEAD

* HEAD:
  [PATCH] hwmon: Documentation update for abituguru
  [PATCH] hwmon: Fix for first generation Abit uGuru chips
  [PATCH] hwmon: New maintainer for w83791d
  [PATCH] pca9539: Honor the force parameter
  [PATCH] i2c-algo-bit: Wipe out dead code
  [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers
  [PATCH] i2c: New mailing list
  [PATCH] i2c-ite: Plan for removal
  [PATCH] i2c-powermac: Fix master_xfer return value
  [PATCH] scx200_acb: Fix the block transactions
  [PATCH] scx200_acb: Fix the state machine
  [PATCH] i2c-iop3xx: Avoid addressing self
  [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core

Documentation/feature-removal-schedule.txt

@@ -247,3 +247,14 @@ Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
 Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
+
+What:	i2c-ite and i2c-algo-ite drivers
+When:	September 2006
+Why:	These drivers never compiled since they were added to the kernel
+	tree 5 years ago. This feature removal can be reevaluated if
+	someone shows interest in the drivers, fixes them and takes over
+	maintenance.
+	http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who:	Jean Delvare <khali@linux-fr.org>
+
+---------------------------

Documentation/hwmon/abituguru

@@ -2,13 +2,36 @@ Kernel driver abituguru
 =======================
 
 Supported chips:
-  * Abit uGuru (Hardware Monitor part only)
+  * Abit uGuru revision 1-3 (Hardware Monitor part only)
     Prefix: 'abituguru'
     Addresses scanned: ISA 0x0E0
     Datasheet: Not available, this driver is based on reverse engineering.
 	A "Datasheet" has been written based on the reverse engineering it
 	should be available in the same dir as this file under the name
 	abituguru-datasheet.
+    Note:
+	The uGuru is a microcontroller with onboard firmware which programs
+	it to behave as a hwmon IC. There are many different revisions of the
+	firmware and thus effectivly many different revisions of the uGuru.
+	Below is an incomplete list with which revisions are used for which
+	Motherboards:
+	uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
+	uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+	uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+	uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+	uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+	uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+	uGuru 4.xxxxx?          (AT8 32X) (2)
+	1) For revisions 2 and 3 uGuru's the driver can autodetect the
+	   sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+	   this doesnot always work. For these uGuru's the autodection can
+	   be overriden with the bank1_types module param. For all 3 known
+	   revison 1 motherboards the correct use of this param is:
+	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+	   You may also need to specify the fan_sensors option for these boards
+	   fan_sensors=5
+	2) The current version of the abituguru driver is known to NOT work
+	   on these Motherboards
 
 Authors:
 	Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,6 +45,11 @@ Module Parameters
 * force: bool		Force detection. Note this parameter only causes the
 			detection to be skipped, if the uGuru can't be read
 			the module initialization (insmod) will still fail.
+* bank1_types: int[]	Bank1 sensortype autodetection override:
+			  -1 autodetect (default)
+			   0 volt sensor
+			   1 temp sensor
+			   2 not connected
 * fan_sensors: int	Tell the driver how many fan speed sensors there are
 			on your motherboard. Default: 0 (autodetect).
 * pwms: int		Tell the driver how many fan speed controls (fan
@@ -29,7 +57,7 @@ Module Parameters
 * verbose: int		How verbose should the driver be? (0-3):
 			   0 normal output
 			   1 + verbose error reporting
-			   2 + sensors type probing info\n"
+			   2 + sensors type probing info (default)
 			   3 + retryable error reporting
 			Default: 2 (the driver is still in the testing phase)
 

Documentation/i2c/busses/i2c-sis96x

@@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>.  Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+reports and/or success stories as well.
 
 
 TO DOs

MAINTAINERS

@@ -274,7 +274,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:	Rudolf Marek
 M:	r.marek@sh.cvut.cz
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ALPHA PORT
@@ -1249,7 +1249,7 @@ S:	Maintained
 I2C SUBSYSTEM
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 W:	http://www.lm-sensors.nu/
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
@@ -2093,7 +2093,7 @@ S:      Maintained
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -3132,7 +3132,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 UCLINUX (AND M68KNOMMU)
@@ -3182,6 +3182,12 @@ P:	Evgeniy Polyakov
 M:	johnpol@2ka.mipt.ru
 S:	Maintained
 
+W83791D HARDWARE MONITORING DRIVER
+P:	Charles Spirakis
+M:	bezaur@gmail.com
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+
 W83L51xD SD/MMC CARD INTERFACE DRIVER
 P:	Pierre Ossman
 M:	drzeus-wbsd@drzeus.cx

drivers/hwmon/abituguru.c

@@ -142,6 +142,14 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+	"   -1 autodetect\n"
+	"    0 volt sensor\n"
+	"    1 temp sensor\n"
+	"    2 not connected");
 static int fan_sensors;
 module_param(fan_sensors, int, 0);
 MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
@@ -397,6 +405,15 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
 	u8 val, buf[3];
 	int ret = ABIT_UGURU_NC;
 
+	/* If overriden by the user return the user selected type */
+	if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+			bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+		ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+			"%d because of \"bank1_types\" module param\n",
+			bank1_types[sensor_addr], (int)sensor_addr);
+		return bank1_types[sensor_addr];
+	}
+
 	/* First read the sensor and the current settings */
 	if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
 			1, ABIT_UGURU_MAX_RETRIES) != 1)
@@ -514,7 +531,7 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data)
 {
 	int i;
 
-	if (fan_sensors) {
+	if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
 		data->bank2_sensors = fan_sensors;
 		ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
 			"\"fan_sensors\" module param\n",
@@ -568,7 +585,7 @@ abituguru_detect_no_pwms(struct abituguru_data *data)
 {
 	int i, j;
 
-	if (pwms) {
+	if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
 		data->pwms = pwms;
 		ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
 			"\"pwms\" module param\n", (int)data->pwms);

drivers/i2c/algos/i2c-algo-bit.c

@@ -372,7 +372,6 @@ static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 
 	while (count > 0) {
 		inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
 		if (inval>=0) {
 			*temp = inval;
 			rdcount++;
@@ -544,8 +543,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap)
 	adap->timeout = 100;	/* default values, should	*/
 	adap->retries = 3;	/* be replaced by defines	*/
 
-	i2c_add_adapter(adap);
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 

drivers/i2c/algos/i2c-algo-ite.c

@@ -742,10 +742,8 @@ int i2c_iic_add_bus(struct i2c_adapter *adap)
 	adap->retries = 3;		/* be replaced by defines	*/
 	adap->flags = 0;
 
-	i2c_add_adapter(adap);
 	iic_init(iic_adap);
-
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 

drivers/i2c/algos/i2c-algo-pca.c

@@ -374,10 +374,10 @@ int i2c_pca_add_bus(struct i2c_adapter *adap)
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
-	rval = pca_init(pca_adap);
+	if ((rval = pca_init(pca_adap)))
+		return rval;
 
-	if (!rval)
-		i2c_add_adapter(adap);
+	rval = i2c_add_adapter(adap);
 
 	return rval;
 }

drivers/i2c/algos/i2c-algo-pcf.c

@@ -479,9 +479,11 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
-	rval = pcf_init_8584(pcf_adap);
-	if (!rval)
-		i2c_add_adapter(adap);
+	if ((rval = pcf_init_8584(pcf_adap)))
+		return rval;
+
+	rval = i2c_add_adapter(adap);
+
 	return rval;
 }
 

drivers/i2c/algos/i2c-algo-sibyte.c

@@ -173,9 +173,7 @@ int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
 		printk("\n");
 	}
 
-	i2c_add_adapter(i2c_adap);
-
-	return 0;
+	return i2c_add_adapter(i2c_adap);
 }
 
 

drivers/i2c/busses/i2c-iop3xx.c

@@ -21,6 +21,9 @@
  * - Make it work with IXP46x chips
  * - Cleanup function names, coding style, etc
  *
+ * - writing to slave address causes latchup on iop331.
+ *	fix: driver refuses to address self.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, version 2.
@@ -72,12 +75,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
 	__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
 } 
 
-static void 
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
-	__raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
 static void 
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
@@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
 	int status;
 	int rc;
 
+	/* avoid writing to my slave address (hangs on 80331),
+	 * forbidden in Intel developer manual
+	 */
+	if (msg->addr == MYSAR) {
+		return -EBUSY;
+	}
+
 	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
 	
 	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&adapter_data->lock);
 
 	iop3xx_i2c_reset(adapter_data);
-	iop3xx_i2c_set_slave_addr(adapter_data);
 	iop3xx_i2c_enable(adapter_data);
 
 	platform_set_drvdata(pdev, new_adapter);

drivers/i2c/busses/i2c-iop3xx.h

@@ -80,7 +80,7 @@
 #define IOP3XX_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
 #define IOP3XX_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
 
-#define MYSAR			0x02	/* SWAG a suitable slave address */
+#define MYSAR			0	/* default slave address */
 
 #define I2C_ERR			321
 #define I2C_ERR_BERR		(I2C_ERR+0)

drivers/i2c/busses/i2c-powermac.c

@@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	int			read;
 	int			addrdir;
 
-	if (num != 1)
-		return -EINVAL;
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
  bail:
 	pmac_i2c_close(bus);
-	return rc < 0 ? rc : msgs->len;
+	return rc < 0 ? rc : 1;
 }
 
 static u32 i2c_powermac_func(struct i2c_adapter * adapter)

drivers/i2c/busses/scx200_acb.c

@@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 		break;
 
 	case state_read:
-		/* Set ACK if receiving the last byte */
-		if (iface->len == 1)
+		/* Set ACK if _next_ byte will be the last one */
+		if (iface->len == 2)
 			outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
 		else
 			outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
 
-		*iface->ptr++ = inb(ACBSDA);
-		--iface->len;
-
-		if (iface->len == 0) {
+		if (iface->len == 1) {
 			iface->result = 0;
 			iface->state = state_idle;
 			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		}
 
+		*iface->ptr++ = inb(ACBSDA);
+		--iface->len;
+
 		break;
 
 	case state_write:
@@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
 		buffer = (u8 *)&cur_word;
 		break;
 
-	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (rw == I2C_SMBUS_READ)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
 		len = data->block[0];
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EINVAL;
 		buffer = &data->block[1];
 		break;
 
@@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 /* For now, we only handle combined mode (smbus) */

drivers/i2c/chips/pca9539.c

@@ -134,11 +134,13 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &pca9539_driver;
 	new_client->flags = 0;
 
-	/* Detection: the pca9539 only has 8 registers (0-7).
-	   A read of 7 should succeed, but a read of 8 should fail. */
-	if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
-	    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
-		goto exit_kfree;
+	if (kind < 0) {
+		/* Detection: the pca9539 only has 8 registers (0-7).
+		   A read of 7 should succeed, but a read of 8 should fail. */
+		if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+		    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+			goto exit_kfree;
+	}
 
 	strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
 

drivers/i2c/i2c-core.c

@@ -756,9 +756,9 @@ int i2c_probe(struct i2c_adapter *adapter,
 					"parameter for adapter %d, "
 					"addr 0x%02x\n", adap_id,
 					address_data->ignore[j + 1]);
+				ignore = 1;
+				break;
 			}
-			ignore = 1;
-			break;
 		}
 		if (ignore)
 			continue;

include/linux/i2c.h

@@ -193,6 +193,8 @@ struct i2c_algorithm {
 	   to NULL. If an adapter algorithm can do SMBus access, set 
 	   smbus_xfer. If set to NULL, the SMBus protocol is simulated
 	   using common I2C messages */
+	/* master_xfer should return the number of messages successfully
+	   processed, or a negative value on error */
 	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, 
 	                   int num);
 	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,