提交 a031589b 编写于 作者: B Bjorn Helgaas 提交者: Jesse Barnes

sparc/PCI: convert devtree and arch-probed bus addresses to resource

Normal PCI enumeration via PCI config space uses __pci_read_base(), where
the PCI core applies any bus-to-resource offset.  But sparc sometimes
reads PCI config space itself, and sometimes it gets addresses from the
device tree.

In ac1edcc5, I converted sparc to use the PCI core bus-to-resource
conversion, but I missed these sparc-specific paths.  I don't have a way
to test it, but I think sparc is broken between that commit and this one.

This patch replaces the sparc-specific pci_resource_adjust() with the
generic pcibios_bus_to_resource() in the following paths:

    pci_cfg_fake_ranges()       (addresses read from PCI config)
    apb_fake_ranges()           (addresses computed based on PCI config)
    of_scan_pci_bridge()        (addresses from OF "ranges" property)

N.B.: Resources of non-P2P bridge devices are set in pci_parse_of_addrs()
and, as far as I can see, never converted to CPU addresses.  I do not
understand why these would be treated differently than bridge windows.

CC: "David S. Miller" <davem@davemloft.net>
CC: sparclinux@vger.kernel.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
上级 c0f20946
......@@ -375,13 +375,6 @@ static void __devinit apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p)
*last_p = last;
}
static void pci_resource_adjust(struct resource *res,
struct resource *root)
{
res->start += root->start;
res->end += root->start;
}
/* For PCI bus devices which lack a 'ranges' property we interrogate
* the config space values to set the resources, just like the generic
* Linux PCI probing code does.
......@@ -390,7 +383,8 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
struct pci_bus *bus,
struct pci_pbm_info *pbm)
{
struct resource *res;
struct pci_bus_region region;
struct resource *res, res2;
u8 io_base_lo, io_limit_lo;
u16 mem_base_lo, mem_limit_lo;
unsigned long base, limit;
......@@ -412,11 +406,14 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
res = bus->resource[0];
if (base <= limit) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
res2.flags = res->flags;
region.start = base;
region.end = limit + 0xfff;
pcibios_bus_to_resource(dev, &res2, &region);
if (!res->start)
res->start = base;
res->start = res2.start;
if (!res->end)
res->end = limit + 0xfff;
pci_resource_adjust(res, &pbm->io_space);
res->end = res2.end;
}
pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
......@@ -428,9 +425,9 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
if (base <= limit) {
res->flags = ((mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) |
IORESOURCE_MEM);
res->start = base;
res->end = limit + 0xfffff;
pci_resource_adjust(res, &pbm->mem_space);
region.start = base;
region.end = limit + 0xfffff;
pcibios_bus_to_resource(dev, res, &region);
}
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
......@@ -459,9 +456,9 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
if (base <= limit) {
res->flags = ((mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH);
res->start = base;
res->end = limit + 0xfffff;
pci_resource_adjust(res, &pbm->mem_space);
region.start = base;
region.end = limit + 0xfffff;
pcibios_bus_to_resource(dev, res, &region);
}
}
......@@ -472,6 +469,7 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev,
struct pci_bus *bus,
struct pci_pbm_info *pbm)
{
struct pci_bus_region region;
struct resource *res;
u32 first, last;
u8 map;
......@@ -479,18 +477,18 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev,
pci_read_config_byte(dev, APB_IO_ADDRESS_MAP, &map);
apb_calc_first_last(map, &first, &last);
res = bus->resource[0];
res->start = (first << 21);
res->end = (last << 21) + ((1 << 21) - 1);
res->flags = IORESOURCE_IO;
pci_resource_adjust(res, &pbm->io_space);
region.start = (first << 21);
region.end = (last << 21) + ((1 << 21) - 1);
pcibios_bus_to_resource(dev, res, &region);
pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map);
apb_calc_first_last(map, &first, &last);
res = bus->resource[1];
res->start = (first << 21);
res->end = (last << 21) + ((1 << 21) - 1);
res->flags = IORESOURCE_MEM;
pci_resource_adjust(res, &pbm->mem_space);
region.start = (first << 21);
region.end = (last << 21) + ((1 << 21) - 1);
pcibios_bus_to_resource(dev, res, &region);
}
static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm,
......@@ -506,6 +504,7 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
struct pci_bus *bus;
const u32 *busrange, *ranges;
int len, i, simba;
struct pci_bus_region region;
struct resource *res;
unsigned int flags;
u64 size;
......@@ -556,8 +555,6 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
struct resource *root;
flags = pci_parse_of_flags(ranges[0]);
size = GET_64BIT(ranges, 6);
if (flags == 0 || size == 0)
......@@ -569,7 +566,6 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
" for bridge %s\n", node->full_name);
continue;
}
root = &pbm->io_space;
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
......@@ -578,18 +574,12 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
}
res = bus->resource[i];
++i;
root = &pbm->mem_space;
}
res->start = GET_64BIT(ranges, 1);
res->end = res->start + size - 1;
res->flags = flags;
/* Another way to implement this would be to add an of_device
* layer routine that can calculate a resource for a given
* range property value in a PCI device.
*/
pci_resource_adjust(res, root);
region.start = GET_64BIT(ranges, 1);
region.end = region.start + size - 1;
pcibios_bus_to_resource(dev, res, &region);
}
after_ranges:
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册