提交 9f12df90 编写于 作者: A Alexander Duyck 提交者: Jeff Kirsher

ixgbe: Store VXLAN port number in network order

The VXLAN port number should be stored in network order instead of in host
order as it is accessed from the hot-path in ATR.  This way we can avoid
having to do any byte swaps in order to validate the port number.

I moved the vxlan_port value into a hole in the read-mostly region of the
adapter struct.  This way it should be in a warm cache-line instead of in
some isolated region in memory when it needs to be accessed.

In addition I went through and stripped a bunch of unneeded ifdef flags
since having an extra variable present doesn't really hurt anything and
makes the code easier to read.  I also went through and dropped the
NETIF_F_RXCSUM flag which was being set in hw_encap_features but provides
no value as the flag is not evaluated in the Rx path.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 56768045
......@@ -661,9 +661,7 @@ struct ixgbe_adapter {
#define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 9)
#define IXGBE_FLAG2_PTP_PPS_ENABLED (u32)(1 << 10)
#define IXGBE_FLAG2_PHY_INTERRUPT (u32)(1 << 11)
#ifdef CONFIG_IXGBE_VXLAN
#define IXGBE_FLAG2_VXLAN_REREG_NEEDED BIT(12)
#endif
#define IXGBE_FLAG2_VLAN_PROMISC BIT(13)
/* Tx fast path data */
......@@ -675,6 +673,9 @@ struct ixgbe_adapter {
int num_rx_queues;
u16 rx_itr_setting;
/* Port number used to identify VXLAN traffic */
__be16 vxlan_port;
/* TX */
struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
......@@ -782,9 +783,6 @@ struct ixgbe_adapter {
u32 timer_event_accumulator;
u32 vferr_refcount;
struct ixgbe_mac_addr *mac_table;
#ifdef CONFIG_IXGBE_VXLAN
u16 vxlan_port;
#endif
struct kobject *info_kobj;
#ifdef CONFIG_IXGBE_HWMON
struct hwmon_buff *ixgbe_hwmon_buff;
......
......@@ -4531,9 +4531,7 @@ static void ixgbe_clear_vxlan_port(struct ixgbe_adapter *adapter)
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VXLANCTRL, 0);
#ifdef CONFIG_IXGBE_VXLAN
adapter->vxlan_port = 0;
#endif
break;
default:
break;
......@@ -7561,9 +7559,6 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
} hdr;
struct tcphdr *th;
struct sk_buff *skb;
#ifdef CONFIG_IXGBE_VXLAN
u8 encap = false;
#endif /* CONFIG_IXGBE_VXLAN */
__be16 vlan_id;
/* if ring doesn't have a interrupt vector, cannot perform ATR */
......@@ -7579,28 +7574,21 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
/* snag network header to get L4 type and address */
skb = first->skb;
hdr.network = skb_network_header(skb);
if (!skb->encapsulation) {
th = tcp_hdr(skb);
} else {
th = tcp_hdr(skb);
#ifdef CONFIG_IXGBE_VXLAN
if (skb->encapsulation &&
first->protocol == htons(ETH_P_IP) &&
hdr.ipv4->protocol != IPPROTO_UDP) {
struct ixgbe_adapter *adapter = q_vector->adapter;
if (!adapter->vxlan_port)
return;
if (first->protocol != htons(ETH_P_IP) ||
hdr.ipv4->version != IPVERSION ||
hdr.ipv4->protocol != IPPROTO_UDP) {
return;
/* verify the port is recognized as VXLAN */
if (adapter->vxlan_port &&
udp_hdr(skb)->dest == adapter->vxlan_port) {
hdr.network = skb_inner_network_header(skb);
th = inner_tcp_hdr(skb);
}
if (ntohs(udp_hdr(skb)->dest) != adapter->vxlan_port)
return;
encap = true;
hdr.network = skb_inner_network_header(skb);
th = inner_tcp_hdr(skb);
#else
return;
#endif /* CONFIG_IXGBE_VXLAN */
}
#endif /* CONFIG_IXGBE_VXLAN */
/* Currently only IPv4/IPv6 with TCP is supported */
switch (hdr.ipv4->version) {
......@@ -7682,10 +7670,8 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
break;
}
#ifdef CONFIG_IXGBE_VXLAN
if (encap)
if (hdr.network != skb_network_header(skb))
input.formatted.flow_type |= IXGBE_ATR_L4TYPE_TUNNEL_MASK;
#endif /* CONFIG_IXGBE_VXLAN */
/* This assumes the Rx queue and Tx queue are bound to the same CPU */
ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw,
......@@ -8554,7 +8540,6 @@ static void ixgbe_add_vxlan_port(struct net_device *dev, sa_family_t sa_family,
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
struct ixgbe_hw *hw = &adapter->hw;
u16 new_port = ntohs(port);
if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE))
return;
......@@ -8562,18 +8547,18 @@ static void ixgbe_add_vxlan_port(struct net_device *dev, sa_family_t sa_family,
if (sa_family == AF_INET6)
return;
if (adapter->vxlan_port == new_port)
if (adapter->vxlan_port == port)
return;
if (adapter->vxlan_port) {
netdev_info(dev,
"Hit Max num of VXLAN ports, not adding port %d\n",
new_port);
ntohs(port));
return;
}
adapter->vxlan_port = new_port;
IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, new_port);
adapter->vxlan_port = port;
IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, ntohs(port));
}
/**
......@@ -8586,7 +8571,6 @@ static void ixgbe_del_vxlan_port(struct net_device *dev, sa_family_t sa_family,
__be16 port)
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
u16 new_port = ntohs(port);
if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE))
return;
......@@ -8594,9 +8578,9 @@ static void ixgbe_del_vxlan_port(struct net_device *dev, sa_family_t sa_family,
if (sa_family == AF_INET6)
return;
if (adapter->vxlan_port != new_port) {
if (adapter->vxlan_port != port) {
netdev_info(dev, "Port %d was not found, not deleting\n",
new_port);
ntohs(port));
return;
}
......@@ -9265,17 +9249,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netdev->priv_flags |= IFF_UNICAST_FLT;
netdev->priv_flags |= IFF_SUPP_NOFCS;
#ifdef CONFIG_IXGBE_VXLAN
switch (adapter->hw.mac.type) {
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
netdev->hw_enc_features |= NETIF_F_RXCSUM;
break;
default:
break;
}
#endif /* CONFIG_IXGBE_VXLAN */
#ifdef CONFIG_IXGBE_DCB
netdev->dcbnl_ops = &dcbnl_ops;
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册