Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 9dda1658 编写于 作者: I Ingo Molnar
浏览文件
操作

Merge branch 'x86/asm' into x86/core, to prepare for new patch 

Collect all changes to arch/x86/entry/entry_64.S, before applying
patch that changes most of the file.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
上级 b72e7464 a49976d1
展开全部 隐藏空白更改
内联 并排
Showing with 2120 addition and 826 deletion
Documentation/x86/entry_64.txt
浏览文件 @ 9dda1658
......@@ -18,10 +18,10 @@ Some of these entries are:
- system_call: syscall instruction from 64-bit code.
- ia32_syscall: int 0x80 from 32-bit or 64-bit code; compat syscall
- entry_INT80_compat: int 0x80 from 32-bit or 64-bit code; compat syscall
either way.
- ia32_syscall, ia32_sysenter: syscall and sysenter from 32-bit
- entry_INT80_compat, ia32_sysenter: syscall and sysenter from 32-bit
code
- interrupt: An array of entries. Every IDT vector that doesn't
......
MAINTAINERS
浏览文件 @ 9dda1658
......@@ -10893,7 +10893,7 @@ M: Andy Lutomirski <luto@amacapital.net>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
S: Maintained
F: arch/x86/vdso/
F: arch/x86/entry/vdso/
XC2028/3028 TUNER DRIVER
M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
......
arch/x86/Kbuild
浏览文件 @ 9dda1658
obj-y += entry/
obj-$(CONFIG_KVM) += kvm/
# Xen paravirtualization support
......@@ -11,7 +14,7 @@ obj-y += kernel/
obj-y += mm/
obj-y += crypto/
obj-y += vdso/
obj-$(CONFIG_IA32_EMULATION) += ia32/
obj-y += platform/
......
arch/x86/Makefile
浏览文件 @ 9dda1658
......@@ -149,12 +149,6 @@ endif
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
# do binutils support CFI?
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
# is .cfi_signal_frame supported too?
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
# does binutils support specific instructions?
asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
......@@ -162,8 +156,8 @@ asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1)
avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
LDFLAGS := -m elf_$(UTS_MACHINE)
......@@ -187,7 +181,7 @@ archscripts: scripts_basic
# Syscall table generation
archheaders:
$(Q)$(MAKE) $(build)=arch/x86/syscalls all
$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
archprepare:
ifeq ($(CONFIG_KEXEC_FILE),y)
......@@ -250,7 +244,7 @@ install:
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
$(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
......
arch/x86/entry/Makefile 0 → 100644
浏览文件 @ 9dda1658
#
# Makefile for the x86 low level entry code
#
obj-y := entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
obj-y += vdso/
obj-y += vsyscall/
obj-$(CONFIG_IA32_EMULATION) += entry_64_compat.o syscall_32.o
arch/x86/include/asm/calling.h → arch/x86/entry/calling.h
浏览文件 @ 9dda1658
......@@ -46,8 +46,6 @@ For 32-bit we have the following conventions - kernel is built with
*/
#include <asm/dwarf2.h>
#ifdef CONFIG_X86_64
/*
......@@ -91,28 +89,27 @@ For 32-bit we have the following conventions - kernel is built with
#define SIZEOF_PTREGS 21*8
.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
subq $15*8+\addskip, %rsp
CFI_ADJUST_CFA_OFFSET 15*8+\addskip
addq $-(15*8+\addskip), %rsp
.endm
.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
.if \r11
movq_cfi r11, 6*8+\offset
movq %r11, 6*8+\offset(%rsp)
.endif
.if \r8910
movq_cfi r10, 7*8+\offset
movq_cfi r9, 8*8+\offset
movq_cfi r8, 9*8+\offset
movq %r10, 7*8+\offset(%rsp)
movq %r9, 8*8+\offset(%rsp)
movq %r8, 9*8+\offset(%rsp)
.endif
.if \rax
movq_cfi rax, 10*8+\offset
movq %rax, 10*8+\offset(%rsp)
.endif
.if \rcx
movq_cfi rcx, 11*8+\offset
movq %rcx, 11*8+\offset(%rsp)
.endif
movq_cfi rdx, 12*8+\offset
movq_cfi rsi, 13*8+\offset
movq_cfi rdi, 14*8+\offset
movq %rdx, 12*8+\offset(%rsp)
movq %rsi, 13*8+\offset(%rsp)
movq %rdi, 14*8+\offset(%rsp)
.endm
.macro SAVE_C_REGS offset=0
SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
......@@ -131,24 +128,24 @@ For 32-bit we have the following conventions - kernel is built with
.endm
.macro SAVE_EXTRA_REGS offset=0
movq_cfi r15, 0*8+\offset
movq_cfi r14, 1*8+\offset
movq_cfi r13, 2*8+\offset
movq_cfi r12, 3*8+\offset
movq_cfi rbp, 4*8+\offset
movq_cfi rbx, 5*8+\offset
movq %r15, 0*8+\offset(%rsp)
movq %r14, 1*8+\offset(%rsp)
movq %r13, 2*8+\offset(%rsp)
movq %r12, 3*8+\offset(%rsp)
movq %rbp, 4*8+\offset(%rsp)
movq %rbx, 5*8+\offset(%rsp)
.endm
.macro SAVE_EXTRA_REGS_RBP offset=0
movq_cfi rbp, 4*8+\offset
movq %rbp, 4*8+\offset(%rsp)
.endm
.macro RESTORE_EXTRA_REGS offset=0
movq_cfi_restore 0*8+\offset, r15
movq_cfi_restore 1*8+\offset, r14
movq_cfi_restore 2*8+\offset, r13
movq_cfi_restore 3*8+\offset, r12
movq_cfi_restore 4*8+\offset, rbp
movq_cfi_restore 5*8+\offset, rbx
movq 0*8+\offset(%rsp), %r15
movq 1*8+\offset(%rsp), %r14
movq 2*8+\offset(%rsp), %r13
movq 3*8+\offset(%rsp), %r12
movq 4*8+\offset(%rsp), %rbp
movq 5*8+\offset(%rsp), %rbx
.endm
.macro ZERO_EXTRA_REGS
......@@ -162,24 +159,24 @@ For 32-bit we have the following conventions - kernel is built with
.macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1
.if \rstor_r11
movq_cfi_restore 6*8, r11
movq 6*8(%rsp), %r11
.endif
.if \rstor_r8910
movq_cfi_restore 7*8, r10
movq_cfi_restore 8*8, r9
movq_cfi_restore 9*8, r8
movq 7*8(%rsp), %r10
movq 8*8(%rsp), %r9
movq 9*8(%rsp), %r8
.endif
.if \rstor_rax
movq_cfi_restore 10*8, rax
movq 10*8(%rsp), %rax
.endif
.if \rstor_rcx
movq_cfi_restore 11*8, rcx
movq 11*8(%rsp), %rcx
.endif
.if \rstor_rdx
movq_cfi_restore 12*8, rdx
movq 12*8(%rsp), %rdx
.endif
movq_cfi_restore 13*8, rsi
movq_cfi_restore 14*8, rdi
movq 13*8(%rsp), %rsi
movq 14*8(%rsp), %rdi
.endm
.macro RESTORE_C_REGS
RESTORE_C_REGS_HELPER 1,1,1,1,1
......@@ -204,8 +201,7 @@ For 32-bit we have the following conventions - kernel is built with
.endm
.macro REMOVE_PT_GPREGS_FROM_STACK addskip=0
addq $15*8+\addskip, %rsp
CFI_ADJUST_CFA_OFFSET -(15*8+\addskip)
subq $-(15*8+\addskip), %rsp
.endm
.macro icebp
......@@ -224,23 +220,23 @@ For 32-bit we have the following conventions - kernel is built with
*/
.macro SAVE_ALL
pushl_cfi_reg eax
pushl_cfi_reg ebp
pushl_cfi_reg edi
pushl_cfi_reg esi
pushl_cfi_reg edx
pushl_cfi_reg ecx
pushl_cfi_reg ebx
pushl %eax
pushl %ebp
pushl %edi
pushl %esi
pushl %edx
pushl %ecx
pushl %ebx
.endm
.macro RESTORE_ALL
popl_cfi_reg ebx
popl_cfi_reg ecx
popl_cfi_reg edx
popl_cfi_reg esi
popl_cfi_reg edi
popl_cfi_reg ebp
popl_cfi_reg eax
popl %ebx
popl %ecx
popl %edx
popl %esi
popl %edi
popl %ebp
popl %eax
.endm
#endif /* CONFIG_X86_64 */
......
arch/x86/kernel/syscall_32.c → arch/x86/entry/syscall_32.c
浏览文件 @ 9dda1658
......@@ -10,7 +10,7 @@
#else
#define SYM(sym, compat) sym
#define ia32_sys_call_table sys_call_table
#define __NR_ia32_syscall_max __NR_syscall_max
#define __NR_entry_INT80_compat_max __NR_syscall_max
#endif
#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ;
......@@ -23,11 +23,11 @@ typedef asmlinkage void (*sys_call_ptr_t)(void);
extern asmlinkage void sys_ni_syscall(void);
__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = {
__visible const sys_call_ptr_t ia32_sys_call_table[__NR_entry_INT80_compat_max+1] = {
/*
* Smells like a compiler bug -- it doesn't work
* when the & below is removed.
*/
[0 ... __NR_ia32_syscall_max] = &sys_ni_syscall,
[0 ... __NR_entry_INT80_compat_max] = &sys_ni_syscall,
#include <asm/syscalls_32.h>
};
arch/x86/syscalls/Makefile → arch/x86/entry/syscalls/Makefile
浏览文件 @ 9dda1658
out := $(obj)/../include/generated/asm
uapi := $(obj)/../include/generated/uapi/asm
out := $(obj)/../../include/generated/asm
uapi := $(obj)/../../include/generated/uapi/asm
# Create output directory if not already present
_dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') \
......
arch/x86/lib/thunk_32.S → arch/x86/entry/thunk_32.S
浏览文件 @ 9dda1658
......@@ -6,16 +6,14 @@
*/
#include <linux/linkage.h>
#include <asm/asm.h>
#include <asm/dwarf2.h>
/* put return address in eax (arg1) */
.macro THUNK name, func, put_ret_addr_in_eax=0
.globl \name
\name:
CFI_STARTPROC
pushl_cfi_reg eax
pushl_cfi_reg ecx
pushl_cfi_reg edx
pushl %eax
pushl %ecx
pushl %edx
.if \put_ret_addr_in_eax
/* Place EIP in the arg1 */
......@@ -23,11 +21,10 @@
.endif
call \func
popl_cfi_reg edx
popl_cfi_reg ecx
popl_cfi_reg eax
popl %edx
popl %ecx
popl %eax
ret
CFI_ENDPROC
_ASM_NOKPROBE(\name)
.endm
......
arch/x86/lib/thunk_64.S → arch/x86/entry/thunk_64.S
浏览文件 @ 9dda1658
......@@ -6,35 +6,32 @@
* Subject to the GNU public license, v.2. No warranty of any kind.
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/calling.h>
#include "calling.h"
#include <asm/asm.h>
/* rdi: arg1 ... normal C conventions. rax is saved/restored. */
.macro THUNK name, func, put_ret_addr_in_rdi=0
.globl \name
\name:
CFI_STARTPROC
/* this one pushes 9 elems, the next one would be %rIP */
pushq_cfi_reg rdi
pushq_cfi_reg rsi
pushq_cfi_reg rdx
pushq_cfi_reg rcx
pushq_cfi_reg rax
pushq_cfi_reg r8
pushq_cfi_reg r9
pushq_cfi_reg r10
pushq_cfi_reg r11
pushq %rdi
pushq %rsi
pushq %rdx
pushq %rcx
pushq %rax
pushq %r8
pushq %r9
pushq %r10
pushq %r11
.if \put_ret_addr_in_rdi
/* 9*8(%rsp) is return addr on stack */
movq_cfi_restore 9*8, rdi
movq 9*8(%rsp), %rdi
.endif
call \func
jmp restore
CFI_ENDPROC
_ASM_NOKPROBE(\name)
.endm
......@@ -57,19 +54,16 @@
#if defined(CONFIG_TRACE_IRQFLAGS) \
|| defined(CONFIG_DEBUG_LOCK_ALLOC) \
|| defined(CONFIG_PREEMPT)
CFI_STARTPROC
CFI_ADJUST_CFA_OFFSET 9*8
restore:
popq_cfi_reg r11
popq_cfi_reg r10
popq_cfi_reg r9
popq_cfi_reg r8
popq_cfi_reg rax
popq_cfi_reg rcx
popq_cfi_reg rdx
popq_cfi_reg rsi
popq_cfi_reg rdi
popq %r11
popq %r10
popq %r9
popq %r8
popq %rax
popq %rcx
popq %rdx
popq %rsi
popq %rdi
ret
CFI_ENDPROC
_ASM_NOKPROBE(restore)
#endif
arch/x86/entry/vsyscall/Makefile 0 → 100644
浏览文件 @ 9dda1658
#
# Makefile for the x86 low level vsyscall code
#
obj-y := vsyscall_gtod.o
obj-$(CONFIG_X86_VSYSCALL_EMULATION) += vsyscall_64.o vsyscall_emu_64.o
arch/x86/kernel/vsyscall_trace.h → arch/x86/entry/vsyscall/vsyscall_trace.h
浏览文件 @ 9dda1658
......@@ -24,6 +24,6 @@ TRACE_EVENT(emulate_vsyscall,
#endif
#undef TRACE_INCLUDE_PATH
#define TRACE_INCLUDE_PATH ../../arch/x86/kernel
#define TRACE_INCLUDE_PATH ../../arch/x86/entry/vsyscall/
#define TRACE_INCLUDE_FILE vsyscall_trace
#include <trace/define_trace.h>
arch/x86/ia32/Makefile
浏览文件 @ 9dda1658
......@@ -2,7 +2,7 @@
# Makefile for the ia32 kernel emulation subsystem.
#
obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o
obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
......
arch/x86/include/asm/dwarf2.h 已删除 100644 → 0
浏览文件 @ b72e7464
#ifndef _ASM_X86_DWARF2_H
#define _ASM_X86_DWARF2_H
#ifndef __ASSEMBLY__
#warning "asm/dwarf2.h should be only included in pure assembly files"
#endif
/*
* Macros for dwarf2 CFI unwind table entries.
* See "as.info" for details on these pseudo ops. Unfortunately
* they are only supported in very new binutils, so define them
* away for older version.
*/
#ifdef CONFIG_AS_CFI
#define CFI_STARTPROC .cfi_startproc
#define CFI_ENDPROC .cfi_endproc
#define CFI_DEF_CFA .cfi_def_cfa
#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
#define CFI_OFFSET .cfi_offset
#define CFI_REL_OFFSET .cfi_rel_offset
#define CFI_REGISTER .cfi_register
#define CFI_RESTORE .cfi_restore
#define CFI_REMEMBER_STATE .cfi_remember_state
#define CFI_RESTORE_STATE .cfi_restore_state
#define CFI_UNDEFINED .cfi_undefined
#define CFI_ESCAPE .cfi_escape
#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
#define CFI_SIGNAL_FRAME .cfi_signal_frame
#else
#define CFI_SIGNAL_FRAME
#endif
#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
/*
* Emit CFI data in .debug_frame sections, not .eh_frame sections.
* The latter we currently just discard since we don't do DWARF
* unwinding at runtime. So only the offline DWARF information is
* useful to anyone. Note we should not use this directive if this
* file is used in the vDSO assembly, or if vmlinux.lds.S gets
* changed so it doesn't discard .eh_frame.
*/
.cfi_sections .debug_frame
#endif
#else
/*
* Due to the structure of pre-exisiting code, don't use assembler line
* comment character # to ignore the arguments. Instead, use a dummy macro.
*/
.macro cfi_ignore a=0, b=0, c=0, d=0
.endm
#define CFI_STARTPROC cfi_ignore
#define CFI_ENDPROC cfi_ignore
#define CFI_DEF_CFA cfi_ignore
#define CFI_DEF_CFA_REGISTER cfi_ignore
#define CFI_DEF_CFA_OFFSET cfi_ignore
#define CFI_ADJUST_CFA_OFFSET cfi_ignore
#define CFI_OFFSET cfi_ignore
#define CFI_REL_OFFSET cfi_ignore
#define CFI_REGISTER cfi_ignore
#define CFI_RESTORE cfi_ignore
#define CFI_REMEMBER_STATE cfi_ignore
#define CFI_RESTORE_STATE cfi_ignore
#define CFI_UNDEFINED cfi_ignore
#define CFI_ESCAPE cfi_ignore
#define CFI_SIGNAL_FRAME cfi_ignore
#endif
/*
* An attempt to make CFI annotations more or less
* correct and shorter. It is implied that you know
* what you're doing if you use them.
*/
#ifdef __ASSEMBLY__
#ifdef CONFIG_X86_64
.macro pushq_cfi reg
pushq \reg
CFI_ADJUST_CFA_OFFSET 8
.endm
.macro pushq_cfi_reg reg
pushq %\reg
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET \reg, 0
.endm
.macro popq_cfi reg
popq \reg
CFI_ADJUST_CFA_OFFSET -8
.endm
.macro popq_cfi_reg reg
popq %\reg
CFI_ADJUST_CFA_OFFSET -8
CFI_RESTORE \reg
.endm
.macro pushfq_cfi
pushfq
CFI_ADJUST_CFA_OFFSET 8
.endm
.macro popfq_cfi
popfq
CFI_ADJUST_CFA_OFFSET -8
.endm
.macro movq_cfi reg offset=0
movq %\reg, \offset(%rsp)
CFI_REL_OFFSET \reg, \offset
.endm
.macro movq_cfi_restore offset reg
movq \offset(%rsp), %\reg
CFI_RESTORE \reg
.endm
#else /*!CONFIG_X86_64*/
.macro pushl_cfi reg
pushl \reg
CFI_ADJUST_CFA_OFFSET 4
.endm
.macro pushl_cfi_reg reg
pushl %\reg
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET \reg, 0
.endm
.macro popl_cfi reg
popl \reg
CFI_ADJUST_CFA_OFFSET -4
.endm
.macro popl_cfi_reg reg
popl %\reg
CFI_ADJUST_CFA_OFFSET -4
CFI_RESTORE \reg
.endm
.macro pushfl_cfi
pushfl
CFI_ADJUST_CFA_OFFSET 4
.endm
.macro popfl_cfi
popfl
CFI_ADJUST_CFA_OFFSET -4
.endm
.macro movl_cfi reg offset=0
movl %\reg, \offset(%esp)
CFI_REL_OFFSET \reg, \offset
.endm
.macro movl_cfi_restore offset reg
movl \offset(%esp), %\reg
CFI_RESTORE \reg
.endm
#endif /*!CONFIG_X86_64*/
#endif /*__ASSEMBLY__*/
#endif /* _ASM_X86_DWARF2_H */
arch/x86/include/asm/frame.h
浏览文件 @ 9dda1658
#ifdef __ASSEMBLY__
#include <asm/asm.h>
#include <asm/dwarf2.h>
/* The annotation hides the frame from the unwinder and makes it look
like a ordinary ebp save/restore. This avoids some special cases for
frame pointer later */
#ifdef CONFIG_FRAME_POINTER
.macro FRAME
__ASM_SIZE(push,_cfi) %__ASM_REG(bp)
CFI_REL_OFFSET __ASM_REG(bp), 0
__ASM_SIZE(push,) %__ASM_REG(bp)
__ASM_SIZE(mov) %__ASM_REG(sp), %__ASM_REG(bp)
.endm
.macro ENDFRAME
__ASM_SIZE(pop,_cfi) %__ASM_REG(bp)
CFI_RESTORE __ASM_REG(bp)
__ASM_SIZE(pop,) %__ASM_REG(bp)
.endm
#else
.macro FRAME
......
arch/x86/include/asm/msr.h
浏览文件 @ 9dda1658
......@@ -206,8 +206,13 @@ do { \
#endif /* !CONFIG_PARAVIRT */
#define wrmsrl_safe(msr, val) wrmsr_safe((msr), (u32)(val), \
(u32)((val) >> 32))
/*
* 64-bit version of wrmsr_safe():
*/
static inline int wrmsrl_safe(u32 msr, u64 val)
{
return wrmsr_safe(msr, (u32)val, (u32)(val >> 32));
}
#define write_tsc(low, high) wrmsr(MSR_IA32_TSC, (low), (high))
......
arch/x86/include/asm/proto.h
浏览文件 @ 9dda1658
......@@ -5,12 +5,14 @@
/* misc architecture specific prototypes */
void system_call(void);
void syscall_init(void);
void ia32_syscall(void);
void ia32_cstar_target(void);
void ia32_sysenter_target(void);
void entry_SYSCALL_64(void);
void entry_SYSCALL_compat(void);
void entry_INT80_32(void);
void entry_INT80_compat(void);
void entry_SYSENTER_32(void);
void entry_SYSENTER_compat(void);
void x86_configure_nx(void);
void x86_report_nx(void);
......
arch/x86/include/asm/segment.h
浏览文件 @ 9dda1658
......@@ -231,11 +231,21 @@
#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES* 8)
#ifdef __KERNEL__
/*
* early_idt_handler_array is an array of entry points referenced in the
* early IDT. For simplicity, it's a real array with one entry point
* every nine bytes. That leaves room for an optional 'push $0' if the
* vector has no error code (two bytes), a 'push $vector_number' (two
* bytes), and a jump to the common entry code (up to five bytes).
*/
#define EARLY_IDT_HANDLER_SIZE 9
#ifndef __ASSEMBLY__
extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
#ifdef CONFIG_TRACING
# define trace_early_idt_handlers early_idt_handlers
# define trace_early_idt_handler_array early_idt_handler_array
#endif
/*
......
arch/x86/kernel/Makefile
浏览文件 @ 9dda1658
......@@ -22,7 +22,7 @@ KASAN_SANITIZE_dumpstack_$(BITS).o := n
CFLAGS_irq.o := -I$(src)/../include/asm/trace
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y := process_$(BITS).o signal.o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time.o ioport.o ldt.o dumpstack.o nmi.o
obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o
......@@ -31,9 +31,6 @@ obj-y += probe_roms.o
obj-$(CONFIG_X86_32) += i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += mcount_64.o
obj-y += syscall_$(BITS).o vsyscall_gtod.o
obj-$(CONFIG_IA32_EMULATION) += syscall_32.o
obj-$(CONFIG_X86_VSYSCALL_EMULATION) += vsyscall_64.o vsyscall_emu_64.o
obj-$(CONFIG_X86_ESPFIX64) += espfix_64.o
obj-$(CONFIG_SYSFS) += ksysfs.o
obj-y += bootflag.o e820.o
......
arch/x86/kernel/asm-offsets_64.c
浏览文件 @ 9dda1658
......@@ -66,7 +66,7 @@ int main(void)
DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1);
DEFINE(NR_syscalls, sizeof(syscalls_64));
DEFINE(__NR_ia32_syscall_max, sizeof(syscalls_ia32) - 1);
DEFINE(__NR_entry_INT80_compat_max, sizeof(syscalls_ia32) - 1);
DEFINE(IA32_NR_syscalls, sizeof(syscalls_ia32));
return 0;
......
arch/x86/kernel/cpu/common.c
浏览文件 @ 9dda1658
......@@ -1026,7 +1026,7 @@ void enable_sep_cpu(void)
(unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
0);
wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)ia32_sysenter_target, 0);
wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
out:
put_cpu();
......@@ -1204,10 +1204,10 @@ void syscall_init(void)
* set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
*/
wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
wrmsrl(MSR_LSTAR, system_call);
wrmsrl(MSR_LSTAR, entry_SYSCALL_64);
#ifdef CONFIG_IA32_EMULATION
wrmsrl(MSR_CSTAR, ia32_cstar_target);
wrmsrl(MSR_CSTAR, entry_SYSCALL_compat);
/*
* This only works on Intel CPUs.
* On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
......@@ -1216,7 +1216,7 @@ void syscall_init(void)
*/
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
#else
wrmsrl(MSR_CSTAR, ignore_sysret);
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
......
arch/x86/kernel/head64.c
浏览文件 @ 9dda1658
......@@ -167,7 +167,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
clear_bss();
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
set_intr_gate(i, early_idt_handlers[i]);
set_intr_gate(i, early_idt_handler_array[i]);
load_idt((const struct desc_ptr *)&idt_descr);
copy_bootdata(__va(real_mode_data));
......
arch/x86/kernel/head_32.S
浏览文件 @ 9dda1658
......@@ -478,21 +478,22 @@ is486:
__INIT
setup_once:
/*
* Set up a idt with 256 entries pointing to ignore_int,
* interrupt gates. It doesn't actually load idt - that needs
* to be done on each CPU. Interrupts are enabled elsewhere,
* when we can be relatively sure everything is ok.
* Set up a idt with 256 interrupt gates that push zero if there
* is no error code and then jump to early_idt_handler_common.
* It doesn't actually load the idt - that needs to be done on
* each CPU. Interrupts are enabled elsewhere, when we can be
* relatively sure everything is ok.
*/
movl $idt_table,%edi
movl $early_idt_handlers,%eax
movl $early_idt_handler_array,%eax
movl $NUM_EXCEPTION_VECTORS,%ecx
1:
movl %eax,(%edi)
movl %eax,4(%edi)
/* interrupt gate, dpl=0, present */
movl $(0x8E000000 + __KERNEL_CS),2(%edi)
addl $9,%eax
addl $EARLY_IDT_HANDLER_SIZE,%eax
addl $8,%edi
loop 1b
......@@ -524,26 +525,28 @@ setup_once:
andl $0,setup_once_ref /* Once is enough, thanks */
ret
ENTRY(early_idt_handlers)
ENTRY(early_idt_handler_array)
# 36(%esp) %eflags
# 32(%esp) %cs
# 28(%esp) %eip
# 24(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
.if (EXCEPTION_ERRCODE_MASK >> i) & 1
ASM_NOP2
.else
.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
pushl $0 # Dummy error code, to make stack frame uniform
.endif
pushl $i # 20(%esp) Vector number
jmp early_idt_handler
jmp early_idt_handler_common
i = i + 1
.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
ENDPROC(early_idt_handlers)
ENDPROC(early_idt_handler_array)
/* This is global to keep gas from relaxing the jumps */
ENTRY(early_idt_handler)
early_idt_handler_common:
/*
* The stack is the hardware frame, an error code or zero, and the
* vector number.
*/
cld
cmpl $2,(%esp) # X86_TRAP_NMI
......@@ -603,7 +606,7 @@ ex_entry:
.Lis_nmi:
addl $8,%esp /* drop vector number and error code */
iret
ENDPROC(early_idt_handler)
ENDPROC(early_idt_handler_common)
/* This is the default interrupt "handler" :-) */
ALIGN
......
arch/x86/kernel/head_64.S
浏览文件 @ 9dda1658
......@@ -321,26 +321,28 @@ bad_address:
jmp bad_address
__INIT
.globl early_idt_handlers
early_idt_handlers:
ENTRY(early_idt_handler_array)
# 104(%rsp) %rflags
# 96(%rsp) %cs
# 88(%rsp) %rip
# 80(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
.if (EXCEPTION_ERRCODE_MASK >> i) & 1
ASM_NOP2
.else
.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
pushq $0 # Dummy error code, to make stack frame uniform
.endif
pushq $i # 72(%rsp) Vector number
jmp early_idt_handler
jmp early_idt_handler_common
i = i + 1
.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
ENDPROC(early_idt_handler_array)
/* This is global to keep gas from relaxing the jumps */
ENTRY(early_idt_handler)
early_idt_handler_common:
/*
* The stack is the hardware frame, an error code or zero, and the
* vector number.
*/
cld
cmpl $2,(%rsp) # X86_TRAP_NMI
......@@ -412,7 +414,7 @@ ENTRY(early_idt_handler)
.Lis_nmi:
addq $16,%rsp # drop vector number and error code
INTERRUPT_RETURN
ENDPROC(early_idt_handler)
ENDPROC(early_idt_handler_common)
__INITDATA
......
arch/x86/kernel/traps.c
浏览文件 @ 9dda1658
......@@ -72,8 +72,7 @@ gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;
#else
#include <asm/processor-flags.h>
#include <asm/setup.h>
asmlinkage int system_call(void);
#include <asm/proto.h>
#endif
/* Must be page-aligned because the real IDT is used in a fixmap. */
......@@ -980,12 +979,12 @@ void __init trap_init(void)
set_bit(i, used_vectors);
#ifdef CONFIG_IA32_EMULATION
set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat);
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif
#ifdef CONFIG_X86_32
set_system_trap_gate(IA32_SYSCALL_VECTOR, &system_call);
set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif
......
arch/x86/lib/Makefile
浏览文件 @ 9dda1658
......@@ -17,7 +17,6 @@ clean-files := inat-tables.c
obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
lib-y := delay.o misc.o cmdline.o
lib-y += thunk_$(BITS).o
lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
lib-y += memcpy_$(BITS).o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
......
arch/x86/lib/atomic64_386_32.S
浏览文件 @ 9dda1658
......@@ -11,26 +11,23 @@
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
#include <asm/dwarf2.h>
/* if you want SMP support, implement these with real spinlocks */
.macro LOCK reg
pushfl_cfi
pushfl
cli
.endm
.macro UNLOCK reg
popfl_cfi
popfl
.endm
#define BEGIN(op) \
.macro endp; \
CFI_ENDPROC; \
ENDPROC(atomic64_##op##_386); \
.purgem endp; \
.endm; \
ENTRY(atomic64_##op##_386); \
CFI_STARTPROC; \
LOCK v;
#define ENDP endp
......
arch/x86/lib/atomic64_cx8_32.S
浏览文件 @ 9dda1658
......@@ -11,7 +11,6 @@
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
#include <asm/dwarf2.h>
.macro read64 reg
movl %ebx, %eax
......@@ -22,16 +21,11 @@
.endm
ENTRY(atomic64_read_cx8)
CFI_STARTPROC
read64 %ecx
ret
CFI_ENDPROC
ENDPROC(atomic64_read_cx8)
ENTRY(atomic64_set_cx8)
CFI_STARTPROC
1:
/* we don't need LOCK_PREFIX since aligned 64-bit writes
* are atomic on 586 and newer */
......@@ -39,28 +33,23 @@ ENTRY(atomic64_set_cx8)
jne 1b
ret
CFI_ENDPROC
ENDPROC(atomic64_set_cx8)
ENTRY(atomic64_xchg_cx8)
CFI_STARTPROC
1:
LOCK_PREFIX
cmpxchg8b (%esi)
jne 1b
ret
CFI_ENDPROC
ENDPROC(atomic64_xchg_cx8)
.macro addsub_return func ins insc
ENTRY(atomic64_\func\()_return_cx8)
CFI_STARTPROC
pushl_cfi_reg ebp
pushl_cfi_reg ebx
pushl_cfi_reg esi
pushl_cfi_reg edi
pushl %ebp
pushl %ebx
pushl %esi
pushl %edi
movl %eax, %esi
movl %edx, %edi
......@@ -79,12 +68,11 @@ ENTRY(atomic64_\func\()_return_cx8)
10:
movl %ebx, %eax
movl %ecx, %edx
popl_cfi_reg edi
popl_cfi_reg esi
popl_cfi_reg ebx
popl_cfi_reg ebp
popl %edi
popl %esi
popl %ebx
popl %ebp
ret
CFI_ENDPROC
ENDPROC(atomic64_\func\()_return_cx8)
.endm
......@@ -93,8 +81,7 @@ addsub_return sub sub sbb
.macro incdec_return func ins insc
ENTRY(atomic64_\func\()_return_cx8)
CFI_STARTPROC
pushl_cfi_reg ebx
pushl %ebx
read64 %esi
1:
......@@ -109,9 +96,8 @@ ENTRY(atomic64_\func\()_return_cx8)
10:
movl %ebx, %eax
movl %ecx, %edx
popl_cfi_reg ebx
popl %ebx
ret
CFI_ENDPROC
ENDPROC(atomic64_\func\()_return_cx8)
.endm
......@@ -119,8 +105,7 @@ incdec_return inc add adc
incdec_return dec sub sbb
ENTRY(atomic64_dec_if_positive_cx8)
CFI_STARTPROC
pushl_cfi_reg ebx
pushl %ebx
read64 %esi
1:
......@@ -136,18 +121,16 @@ ENTRY(atomic64_dec_if_positive_cx8)
2:
movl %ebx, %eax
movl %ecx, %edx
popl_cfi_reg ebx
popl %ebx
ret
CFI_ENDPROC
ENDPROC(atomic64_dec_if_positive_cx8)
ENTRY(atomic64_add_unless_cx8)
CFI_STARTPROC
pushl_cfi_reg ebp
pushl_cfi_reg ebx
pushl %ebp
pushl %ebx
/* these just push these two parameters on the stack */
pushl_cfi_reg edi
pushl_cfi_reg ecx
pushl %edi
pushl %ecx
movl %eax, %ebp
movl %edx, %edi
......@@ -168,21 +151,18 @@ ENTRY(atomic64_add_unless_cx8)
movl $1, %eax
3:
addl $8, %esp
CFI_ADJUST_CFA_OFFSET -8
popl_cfi_reg ebx
popl_cfi_reg ebp
popl %ebx
popl %ebp
ret
4:
cmpl %edx, 4(%esp)
jne 2b
xorl %eax, %eax
jmp 3b
CFI_ENDPROC
ENDPROC(atomic64_add_unless_cx8)
ENTRY(atomic64_inc_not_zero_cx8)
CFI_STARTPROC
pushl_cfi_reg ebx
pushl %ebx
read64 %esi
1:
......@@ -199,7 +179,6 @@ ENTRY(atomic64_inc_not_zero_cx8)
movl $1, %eax
3:
popl_cfi_reg ebx
popl %ebx
ret
CFI_ENDPROC
ENDPROC(atomic64_inc_not_zero_cx8)
arch/x86/lib/checksum_32.S
浏览文件 @ 9dda1658
......@@ -26,7 +26,6 @@
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/errno.h>
#include <asm/asm.h>
......@@ -50,9 +49,8 @@ unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
* alignment for the unrolled loop.
*/
ENTRY(csum_partial)
CFI_STARTPROC
pushl_cfi_reg esi
pushl_cfi_reg ebx
pushl %esi
pushl %ebx
movl 20(%esp),%eax # Function arg: unsigned int sum
movl 16(%esp),%ecx # Function arg: int len
movl 12(%esp),%esi # Function arg: unsigned char *buff
......@@ -129,10 +127,9 @@ ENTRY(csum_partial)
jz 8f
roll $8, %eax
8:
popl_cfi_reg ebx
popl_cfi_reg esi
popl %ebx
popl %esi
ret
CFI_ENDPROC
ENDPROC(csum_partial)
#else
......@@ -140,9 +137,8 @@ ENDPROC(csum_partial)
/* Version for PentiumII/PPro */
ENTRY(csum_partial)
CFI_STARTPROC
pushl_cfi_reg esi
pushl_cfi_reg ebx
pushl %esi
pushl %ebx
movl 20(%esp),%eax # Function arg: unsigned int sum
movl 16(%esp),%ecx # Function arg: int len
movl 12(%esp),%esi # Function arg: const unsigned char *buf
......@@ -249,10 +245,9 @@ ENTRY(csum_partial)
jz 90f
roll $8, %eax
90:
popl_cfi_reg ebx
popl_cfi_reg esi
popl %ebx
popl %esi
ret
CFI_ENDPROC
ENDPROC(csum_partial)
#endif
......@@ -287,12 +282,10 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
#define FP 12
ENTRY(csum_partial_copy_generic)
CFI_STARTPROC
subl $4,%esp
CFI_ADJUST_CFA_OFFSET 4
pushl_cfi_reg edi
pushl_cfi_reg esi
pushl_cfi_reg ebx
pushl %edi
pushl %esi
pushl %ebx
movl ARGBASE+16(%esp),%eax # sum
movl ARGBASE+12(%esp),%ecx # len
movl ARGBASE+4(%esp),%esi # src
......@@ -401,12 +394,11 @@ DST( movb %cl, (%edi) )
.previous
popl_cfi_reg ebx
popl_cfi_reg esi
popl_cfi_reg edi
popl_cfi %ecx # equivalent to addl $4,%esp
popl %ebx
popl %esi
popl %edi
popl %ecx # equivalent to addl $4,%esp
ret
CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
#else
......@@ -426,10 +418,9 @@ ENDPROC(csum_partial_copy_generic)
#define ARGBASE 12
ENTRY(csum_partial_copy_generic)
CFI_STARTPROC
pushl_cfi_reg ebx
pushl_cfi_reg edi
pushl_cfi_reg esi
pushl %ebx
pushl %edi
pushl %esi
movl ARGBASE+4(%esp),%esi #src
movl ARGBASE+8(%esp),%edi #dst
movl ARGBASE+12(%esp),%ecx #len
......@@ -489,11 +480,10 @@ DST( movb %dl, (%edi) )
jmp 7b
.previous
popl_cfi_reg esi
popl_cfi_reg edi
popl_cfi_reg ebx
popl %esi
popl %edi
popl %ebx
ret
CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
#undef ROUND
......
arch/x86/lib/clear_page_64.S
浏览文件 @ 9dda1658
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
......@@ -15,7 +14,6 @@
* %rdi - page
*/
ENTRY(clear_page)
CFI_STARTPROC
ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \
"jmp clear_page_c_e", X86_FEATURE_ERMS
......@@ -24,11 +22,9 @@ ENTRY(clear_page)
xorl %eax,%eax
rep stosq
ret
CFI_ENDPROC
ENDPROC(clear_page)
ENTRY(clear_page_orig)
CFI_STARTPROC
xorl %eax,%eax
movl $4096/64,%ecx
......@@ -48,14 +44,11 @@ ENTRY(clear_page_orig)
jnz .Lloop
nop
ret
CFI_ENDPROC
ENDPROC(clear_page_orig)
ENTRY(clear_page_c_e)
CFI_STARTPROC
movl $4096,%ecx
xorl %eax,%eax
rep stosb
ret
CFI_ENDPROC
ENDPROC(clear_page_c_e)
arch/x86/lib/cmpxchg16b_emu.S
浏览文件 @ 9dda1658
......@@ -6,7 +6,6 @@
*
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/percpu.h>
.text
......@@ -21,7 +20,6 @@
* %al : Operation successful
*/
ENTRY(this_cpu_cmpxchg16b_emu)
CFI_STARTPROC
#
# Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not
......@@ -32,7 +30,7 @@ CFI_STARTPROC
# *atomic* on a single cpu (as provided by the this_cpu_xx class of
# macros).
#
pushfq_cfi
pushfq
cli
cmpq PER_CPU_VAR((%rsi)), %rax
......@@ -43,17 +41,13 @@ CFI_STARTPROC
movq %rbx, PER_CPU_VAR((%rsi))
movq %rcx, PER_CPU_VAR(8(%rsi))
CFI_REMEMBER_STATE
popfq_cfi
popfq
mov $1, %al
ret
CFI_RESTORE_STATE
.Lnot_same:
popfq_cfi
popfq
xor %al,%al
ret
CFI_ENDPROC
ENDPROC(this_cpu_cmpxchg16b_emu)
arch/x86/lib/cmpxchg8b_emu.S
浏览文件 @ 9dda1658
......@@ -7,7 +7,6 @@
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
.text
......@@ -20,14 +19,13 @@
* %ecx : high 32 bits of new value
*/
ENTRY(cmpxchg8b_emu)
CFI_STARTPROC
#
# Emulate 'cmpxchg8b (%esi)' on UP except we don't
# set the whole ZF thing (caller will just compare
# eax:edx with the expected value)
#
pushfl_cfi
pushfl
cli
cmpl (%esi), %eax
......@@ -38,18 +36,15 @@ CFI_STARTPROC
movl %ebx, (%esi)
movl %ecx, 4(%esi)
CFI_REMEMBER_STATE
popfl_cfi
popfl
ret
CFI_RESTORE_STATE
.Lnot_same:
movl (%esi), %eax
.Lhalf_same:
movl 4(%esi), %edx
popfl_cfi
popfl
ret
CFI_ENDPROC
ENDPROC(cmpxchg8b_emu)
arch/x86/lib/copy_page_64.S
浏览文件 @ 9dda1658
/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/cpufeature.h>
#include <asm/alternative-asm.h>
......@@ -13,22 +12,16 @@
*/
ALIGN
ENTRY(copy_page)
CFI_STARTPROC
ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
movl $4096/8, %ecx
rep movsq
ret
CFI_ENDPROC
ENDPROC(copy_page)
ENTRY(copy_page_regs)
CFI_STARTPROC
subq $2*8, %rsp
CFI_ADJUST_CFA_OFFSET 2*8
movq %rbx, (%rsp)
CFI_REL_OFFSET rbx, 0
movq %r12, 1*8(%rsp)
CFI_REL_OFFSET r12, 1*8
movl $(4096/64)-5, %ecx
.p2align 4
......@@ -87,11 +80,7 @@ ENTRY(copy_page_regs)
jnz .Loop2
movq (%rsp), %rbx
CFI_RESTORE rbx
movq 1*8(%rsp), %r12
CFI_RESTORE r12
addq $2*8, %rsp
CFI_ADJUST_CFA_OFFSET -2*8
ret
CFI_ENDPROC
ENDPROC(copy_page_regs)
arch/x86/lib/copy_user_64.S
浏览文件 @ 9dda1658
......@@ -7,7 +7,6 @@
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
......@@ -18,7 +17,6 @@
/* Standard copy_to_user with segment limit checking */
ENTRY(_copy_to_user)
CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rdi,%rcx
addq %rdx,%rcx
......@@ -30,12 +28,10 @@ ENTRY(_copy_to_user)
X86_FEATURE_REP_GOOD, \
"jmp copy_user_enhanced_fast_string", \
X86_FEATURE_ERMS
CFI_ENDPROC
ENDPROC(_copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(_copy_from_user)
CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rsi,%rcx
addq %rdx,%rcx
......@@ -47,14 +43,12 @@ ENTRY(_copy_from_user)
X86_FEATURE_REP_GOOD, \
"jmp copy_user_enhanced_fast_string", \
X86_FEATURE_ERMS
CFI_ENDPROC
ENDPROC(_copy_from_user)
.section .fixup,"ax"
/* must zero dest */
ENTRY(bad_from_user)
bad_from_user:
CFI_STARTPROC
movl %edx,%ecx
xorl %eax,%eax
rep
......@@ -62,7 +56,6 @@ bad_from_user:
bad_to_user:
movl %edx,%eax
ret
CFI_ENDPROC
ENDPROC(bad_from_user)
.previous
......@@ -80,7 +73,6 @@ ENDPROC(bad_from_user)
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_generic_unrolled)
CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 20f /* less then 8 bytes, go to byte copy loop */
......@@ -162,7 +154,6 @@ ENTRY(copy_user_generic_unrolled)
_ASM_EXTABLE(19b,40b)
_ASM_EXTABLE(21b,50b)
_ASM_EXTABLE(22b,50b)
CFI_ENDPROC
ENDPROC(copy_user_generic_unrolled)
/* Some CPUs run faster using the string copy instructions.
......@@ -184,7 +175,6 @@ ENDPROC(copy_user_generic_unrolled)
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_generic_string)
CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 2f /* less than 8 bytes, go to byte copy loop */
......@@ -209,7 +199,6 @@ ENTRY(copy_user_generic_string)
_ASM_EXTABLE(1b,11b)
_ASM_EXTABLE(3b,12b)
CFI_ENDPROC
ENDPROC(copy_user_generic_string)
/*
......@@ -225,7 +214,6 @@ ENDPROC(copy_user_generic_string)
* eax uncopied bytes or 0 if successful.
*/
ENTRY(copy_user_enhanced_fast_string)
CFI_STARTPROC
ASM_STAC
movl %edx,%ecx
1: rep
......@@ -240,7 +228,6 @@ ENTRY(copy_user_enhanced_fast_string)
.previous
_ASM_EXTABLE(1b,12b)
CFI_ENDPROC
ENDPROC(copy_user_enhanced_fast_string)
/*
......@@ -248,7 +235,6 @@ ENDPROC(copy_user_enhanced_fast_string)
* This will force destination/source out of cache for more performance.
*/
ENTRY(__copy_user_nocache)
CFI_STARTPROC
ASM_STAC
cmpl $8,%edx
jb 20f /* less then 8 bytes, go to byte copy loop */
......@@ -332,5 +318,4 @@ ENTRY(__copy_user_nocache)
_ASM_EXTABLE(19b,40b)
_ASM_EXTABLE(21b,50b)
_ASM_EXTABLE(22b,50b)
CFI_ENDPROC
ENDPROC(__copy_user_nocache)
arch/x86/lib/csum-copy_64.S
浏览文件 @ 9dda1658
......@@ -6,7 +6,6 @@
* for more details. No warranty for anything given at all.
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/errno.h>
#include <asm/asm.h>
......@@ -47,23 +46,16 @@
ENTRY(csum_partial_copy_generic)
CFI_STARTPROC
cmpl $3*64, %edx
jle .Lignore
.Lignore:
subq $7*8, %rsp
CFI_ADJUST_CFA_OFFSET 7*8
movq %rbx, 2*8(%rsp)
CFI_REL_OFFSET rbx, 2*8
movq %r12, 3*8(%rsp)
CFI_REL_OFFSET r12, 3*8
movq %r14, 4*8(%rsp)
CFI_REL_OFFSET r14, 4*8
movq %r13, 5*8(%rsp)
CFI_REL_OFFSET r13, 5*8
movq %rbp, 6*8(%rsp)
CFI_REL_OFFSET rbp, 6*8
movq %r8, (%rsp)
movq %r9, 1*8(%rsp)
......@@ -206,22 +198,14 @@ ENTRY(csum_partial_copy_generic)
addl %ebx, %eax
adcl %r9d, %eax /* carry */
CFI_REMEMBER_STATE
.Lende:
movq 2*8(%rsp), %rbx
CFI_RESTORE rbx
movq 3*8(%rsp), %r12
CFI_RESTORE r12
movq 4*8(%rsp), %r14
CFI_RESTORE r14
movq 5*8(%rsp), %r13
CFI_RESTORE r13
movq 6*8(%rsp), %rbp
CFI_RESTORE rbp
addq $7*8, %rsp
CFI_ADJUST_CFA_OFFSET -7*8
ret
CFI_RESTORE_STATE
/* Exception handlers. Very simple, zeroing is done in the wrappers */
.Lbad_source:
......@@ -237,5 +221,4 @@ ENTRY(csum_partial_copy_generic)
jz .Lende
movl $-EFAULT, (%rax)
jmp .Lende
CFI_ENDPROC
ENDPROC(csum_partial_copy_generic)
arch/x86/lib/getuser.S
浏览文件 @ 9dda1658
......@@ -26,7 +26,6 @@
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/page_types.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
......@@ -36,7 +35,6 @@
.text
ENTRY(__get_user_1)
CFI_STARTPROC
GET_THREAD_INFO(%_ASM_DX)
cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
jae bad_get_user
......@@ -45,11 +43,9 @@ ENTRY(__get_user_1)
xor %eax,%eax
ASM_CLAC
ret
CFI_ENDPROC
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
CFI_STARTPROC
add $1,%_ASM_AX
jc bad_get_user
GET_THREAD_INFO(%_ASM_DX)
......@@ -60,11 +56,9 @@ ENTRY(__get_user_2)
xor %eax,%eax
ASM_CLAC
ret
CFI_ENDPROC
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
CFI_STARTPROC
add $3,%_ASM_AX
jc bad_get_user
GET_THREAD_INFO(%_ASM_DX)
......@@ -75,11 +69,9 @@ ENTRY(__get_user_4)
xor %eax,%eax
ASM_CLAC
ret
CFI_ENDPROC
ENDPROC(__get_user_4)
ENTRY(__get_user_8)
CFI_STARTPROC
#ifdef CONFIG_X86_64
add $7,%_ASM_AX
jc bad_get_user
......@@ -104,28 +96,23 @@ ENTRY(__get_user_8)
ASM_CLAC
ret
#endif
CFI_ENDPROC
ENDPROC(__get_user_8)
bad_get_user:
CFI_STARTPROC
xor %edx,%edx
mov $(-EFAULT),%_ASM_AX
ASM_CLAC
ret
CFI_ENDPROC
END(bad_get_user)
#ifdef CONFIG_X86_32
bad_get_user_8:
CFI_STARTPROC
xor %edx,%edx
xor %ecx,%ecx
mov $(-EFAULT),%_ASM_AX
ASM_CLAC
ret
CFI_ENDPROC
END(bad_get_user_8)
#endif
......
arch/x86/lib/iomap_copy_64.S
浏览文件 @ 9dda1658
......@@ -16,15 +16,12 @@
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
/*
* override generic version in lib/iomap_copy.c
*/
ENTRY(__iowrite32_copy)
CFI_STARTPROC
movl %edx,%ecx
rep movsd
ret
CFI_ENDPROC
ENDPROC(__iowrite32_copy)
arch/x86/lib/memcpy_64.S
浏览文件 @ 9dda1658
......@@ -2,7 +2,6 @@
#include <linux/linkage.h>
#include <asm/cpufeature.h>
#include <asm/dwarf2.h>
#include <asm/alternative-asm.h>
/*
......@@ -53,7 +52,6 @@ ENTRY(memcpy_erms)
ENDPROC(memcpy_erms)
ENTRY(memcpy_orig)
CFI_STARTPROC
movq %rdi, %rax
cmpq $0x20, %rdx
......@@ -178,5 +176,4 @@ ENTRY(memcpy_orig)
.Lend:
retq
CFI_ENDPROC
ENDPROC(memcpy_orig)
arch/x86/lib/memmove_64.S
浏览文件 @ 9dda1658
此差异已折叠。
arch/x86/lib/memset_64.S
浏览文件 @ 9dda1658
此差异已折叠。
arch/x86/lib/msr-reg.S
浏览文件 @ 9dda1658
此差异已折叠。
arch/x86/lib/putuser.S
浏览文件 @ 9dda1658
此差异已折叠。
arch/x86/lib/rwsem.S
浏览文件 @ 9dda1658
此差异已折叠。
arch/x86/net/bpf_jit.S
浏览文件 @ 9dda1658
......@@ -8,7 +8,6 @@
* of the License.
*/
#include <linux/linkage.h>
#include <asm/dwarf2.h>
/*
* Calling convention :
......
arch/x86/um/Makefile
浏览文件 @ 9dda1658
此差异已折叠。
arch/x86/xen/xen-asm_64.S
浏览文件 @ 9dda1658
此差异已折叠。
scripts/checksyscalls.sh
浏览文件 @ 9dda1658
......@@ -212,5 +212,5 @@ EOF
)
}
(ignore_list && syscall_list $(dirname $0)/../arch/x86/syscalls/syscall_32.tbl) | \
(ignore_list && syscall_list $(dirname $0)/../arch/x86/entry/syscalls/syscall_32.tbl) | \
$* -E -x c - > /dev/null
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或