提交 9ccd6080 编写于 作者: K Kristina Martsenko 提交者: Kevin Hilman

arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG

Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented
on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on
the version that's currently available from the ARM DTS repository [1].

[1] git://linux-arm.org/arm-dts.gitSigned-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
Acked-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
上级 3adf7aaa
......@@ -1614,6 +1614,7 @@ M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/vexpress*
F: arch/arm64/boot/dts/arm/vexpress*
F: arch/arm/mach-vexpress/
F: */*/vexpress*
F: */*/*/vexpress*
......
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
......
/*
* ARM Ltd. Versatile Express
*
* LogicTile Express 20MG
* V2F-1XV7
*
* Cortex-A53 (2 cores) Soft Macrocell Model
*
* HBI-0247C
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "V2F-1XV7 Cortex-A53x2 SMM";
arm,hbi = <0x247>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
chosen {
stdout-path = "serial0:38400n8";
};
aliases {
serial0 = &v2m_serial0;
serial1 = &v2m_serial1;
serial2 = &v2m_serial2;
serial3 = &v2m_serial3;
i2c0 = &v2m_i2c_dvi;
i2c1 = &v2m_i2c_pcie;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0>;
next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 1>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache0 {
compatible = "cache";
};
};
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
};
gic: interrupt-controller@2c001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
<0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
};
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
smbclk: osc@4 {
/* SMC clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <40000000 40000000>;
#clock-cells = <0>;
clock-output-names = "smclk";
};
volt@0 {
/* VIO to expansion board above */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO_UP";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
volt@1 {
/* 12V from power connector J6 */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
regulator-name = "12";
regulator-always-on;
};
temp@0 {
/* FPGA temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "FPGA";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0x08000000 0x04000000>,
<1 0 0 0x14000000 0x04000000>,
<2 0 0 0x18000000 0x04000000>,
<3 0 0 0x1c000000 0x04000000>,
<4 0 0 0x0c000000 0x04000000>,
<5 0 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
/include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册