ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420

Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.
Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

arch/arm/boot/dts/exynos5420-smdk5420.dts

@@ -140,6 +140,22 @@
 		};
 	};
 
+	pinctrl@14000000 {
+		usb300_vbus_en: usb300-vbus-en {
+			samsung,pins = "gpg0-5";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb301_vbus_en: usb301-vbus-en {
+			samsung,pins = "gpg1-4";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	hdmi@14530000 {
 		status = "okay";
 		hpd-gpio = <&gpx3 7 0>;
@@ -147,6 +163,36 @@
 		pinctrl-0 = <&hdmi_hpd_irq>;
 	};
 
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg0 5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg1 4 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	phy@12100000 {
+		vbus-supply = <&usb300_vbus_reg>;
+	};
+
+	phy@12500000 {
+		vbus-supply = <&usb301_vbus_reg>;
+	};
+
 	i2c_2: i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;